Apple2-IO-RPi/Apple2/Shell.asm

329 lines
4.6 KiB
NASM
Raw Normal View History

2024-01-03 03:51:33 +00:00
; Copyright Terence J. Boldt (c)2021-2024
2022-01-11 04:00:58 +00:00
; Use of this source code is governed by an MIT
; license that can be found in the LICENSE file.
; This file contains the source for the SHELL
; application that runs on the Apple II to talk
; to the Raspberry Pi
2021-11-05 19:15:54 +00:00
;ProDOS Zero Page
Command = $42 ;ProDOS Command
Unit = $43 ;ProDOS unit (SDDD0000)
BufferLo = $44
BufferHi = $45
BlockLo = $46
BlockHi = $47
; ProDOS Error Codes
IOError = $27
NoDevice = $28
WriteProtect = $2B
2021-12-31 18:09:53 +00:00
InputByte = $c08e
OutputByte = $c08d
InputFlags = $c08b
OutputFlags = $c087
2021-11-05 19:15:54 +00:00
ResetCommand = $00
2021-11-05 19:15:54 +00:00
ReadBlockCommand = $01
WriteBlockCommand = $02
GetTimeCommand = $03
ChangeDriveCommand = $04
ExecCommand = $05
LoadFileCommand = $06
SaveFileCommand = $07
MenuCommand = $08
ShellCommand = $09
2021-11-05 19:15:54 +00:00
InputString = $fd6a
StringBuffer = $0200
PrintChar = $fded
PrintHex = $FDE3
PrintByte = $FDDA
2021-11-05 19:15:54 +00:00
Keyboard = $c000
ClearKeyboard = $c010
Home = $fc58
2021-11-05 19:15:54 +00:00
Wait = $fca8
PromptChar = $33
Read80Col = $c01f
TextPage1 = $c054
TextPage2 = $c055
htab = $24
vtab = $25
BasL = $28
htab80 = $057b
BasCalc = $fbc1
2021-11-05 19:15:54 +00:00
LastChar = $06
2021-12-31 18:09:53 +00:00
SlotL = $fe
SlotH = $ff
2021-11-05 19:15:54 +00:00
ESC = $9b
.org $2000
; Find Apple2-IO-RPi card
ldx #$06
ldy #$09
CheckIdBytes:
lda $C700,y ; !! Self modifying code
cmp IdBytes,y
bne NextCard
dey
bne CheckIdBytes
jmp FoundCard
NextCard:
dec CheckIdBytes+2
ldy #$09
dex
bne CheckIdBytes
CardNotFound:
2021-12-31 18:09:53 +00:00
ldy #$00
PrintCardNotFound:
lda TextCardNotFound,y
beq Failed
ora #$80
jsr PrintChar
2021-12-31 18:09:53 +00:00
iny
bne PrintCardNotFound
Failed:
rts
FoundCard:
ldy #$00
PrintCardFound:
lda TextCardFound,y
beq PrintCardNumber
ora #$80
jsr PrintChar
2021-12-31 18:09:53 +00:00
iny
bne PrintCardFound
PrintCardNumber:
inx
txa
jsr PrintHex
lda #$8D
jsr PrintChar
SetOffsetForCard:
2021-12-31 18:09:53 +00:00
txa
asl
asl
asl
asl
tax
2022-03-02 03:46:03 +00:00
Init:
2021-12-31 18:09:53 +00:00
lda #$8d
jsr $c300 ; force 80 columns
2022-03-02 03:46:03 +00:00
ldy #$00
PrintString:
lda Text,y
beq Start
ora #$80
jsr PrintChar
iny
bne PrintString
Start:
lda LastChar
pha
2021-11-05 19:15:54 +00:00
bit ClearKeyboard
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
; lda #ResetCommand
; jsr SendByte
lda #ShellCommand
2021-11-05 19:15:54 +00:00
jsr SendByte
jsr DumpOutput
pla
sta LastChar
2021-11-05 19:15:54 +00:00
rts
DumpOutput:
jsr GetByte
cmp #$00
beq endOutput
pha
jsr ClearCursor
pla
cmp #'H'
beq setColumn
cmp #'V'
beq setRow
cmp #'C'
beq clearScreen
cmp #'T'
beq setTop
cmp #'B'
beq setBottom
cmp #'U'
beq moveUp
2021-11-05 19:15:54 +00:00
jsr PrintChar
jsr SetCursor
jmp DumpOutput
2021-11-05 19:15:54 +00:00
endOutput:
rts
clearScreen:
jsr Home
jsr SetCursor
jmp DumpOutput
setColumn:
jsr GetByte
sta htab
sta htab80
jsr SetCursor
jmp DumpOutput
setRow:
jsr GetByte
sta vtab
jsr BasCalc
jsr SetCursor
jmp DumpOutput
setTop:
jsr GetByte
sta $22
jmp DumpOutput
setBottom:
jsr GetByte
sta $23
jmp DumpOutput
moveUp:
dec vtab
lda vtab
jsr BasCalc
jsr SetCursor
jmp DumpOutput
2021-11-05 19:15:54 +00:00
SendByte:
pha
waitWrite:
2021-12-31 18:09:53 +00:00
lda InputFlags,x
2021-11-05 19:15:54 +00:00
rol
rol
bcs waitWrite
pla
2021-12-31 18:09:53 +00:00
sta OutputByte,x
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.if HW_TYPE = 0
2021-11-05 19:15:54 +00:00
lda #$1e ; set bit 0 low to indicate write started
2021-12-31 18:09:53 +00:00
sta OutputFlags,x
2021-11-05 19:15:54 +00:00
finishWrite:
2021-12-31 18:09:53 +00:00
lda InputFlags,x
2021-11-05 19:15:54 +00:00
rol
rol
bcc finishWrite
lda #$1f
2021-12-31 18:09:53 +00:00
sta OutputFlags,x
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.endif
2021-11-05 19:15:54 +00:00
rts
GetByte:
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.if HW_TYPE = 0
2021-11-05 19:15:54 +00:00
lda #$1d ;set read flag low
2021-12-31 18:09:53 +00:00
sta OutputFlags,x
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.endif
2021-11-05 19:15:54 +00:00
waitRead:
2021-12-31 18:09:53 +00:00
lda InputFlags,x
2021-11-05 19:15:54 +00:00
rol
bcc readByte
bit Keyboard ;keypress will abort waiting to read
bpl waitRead
keyPressed:
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
lda InputFlags,x
rol
rol
bcs keyPressed
2022-02-22 20:43:54 +00:00
lda Keyboard ;send keypress to RPi
and #$7f
sta OutputByte,x
bit ClearKeyboard
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.if HW_TYPE = 0
2022-02-22 20:43:54 +00:00
lda #$1c ;set write flag low too
2021-12-31 18:09:53 +00:00
sta OutputFlags,x
2022-02-22 20:43:54 +00:00
finishKeyPress:
lda InputFlags,x
rol
rol
bcc finishKeyPress
lda #$1d ;set flags back for reading
sta OutputFlags,x
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.endif
2022-02-22 20:43:54 +00:00
jmp waitRead
2021-11-05 19:15:54 +00:00
readByte:
2021-12-31 18:09:53 +00:00
lda InputByte,x
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.if HW_TYPE = 0
2021-11-05 19:15:54 +00:00
pha
lda #$1f ;set all flags high
2021-12-31 18:09:53 +00:00
sta OutputFlags,x
2021-11-05 19:15:54 +00:00
finishRead:
2021-12-31 18:09:53 +00:00
lda InputFlags,x
2021-11-05 19:15:54 +00:00
rol
bcc finishRead
pla
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.endif
2021-11-05 19:15:54 +00:00
clc ;success
end:
rts
SetCursor:
lda htab80 ;get horizontal location / 2
lsr
tay
lda TextPage2
bcc setChar
lda TextPage1
setChar:
lda (BasL),y
sta LastChar ; save so ClearCursor will pick it up
cmp #$e0
bpl lowerCase
cmp #$c0
bpl upperCase
cmp #$a0
bpl symbol
cmp #$80
bpl noop
symbol:
lowerCase:
invert:
eor #$80
jmp storeChar
upperCase:
and #$1f
jmp storeChar
noop:
storeChar:
sta (BasL),y
lda TextPage1
rts
ClearCursor:
lda htab80 ;get horizontal location / 2
lsr
tay
lda TextPage2
bcc restoreChar
lda TextPage1
restoreChar:
lda LastChar
sta (BasL),y
lda TextPage1
rts
2022-03-02 03:46:03 +00:00
Text:
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.if HW_TYPE = 0
.byte "Apple2-IO-RPi Shell Version 0010 (classic)",$8d
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.else
.byte "Apple2-IO-RPi Shell Version 8010 (pico)",$8d
Initial Pico hardware support * Added assemble.cmd for Windows. In the long run, some (c)make-based cross-plafrom solution seems preferable. * Fill up the menu page just like the other pages. * Allow to assemble for different hardware types. The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0. * Avoid unwanted i/o access. Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF. * Made use of BIT instruction to access InputFlags from firmware. Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction. * Removed push/pop from GetByte. After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x. * Added InputFlags check for consistency. * Added support for an alternative hardware type. The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Added another comminucation interface implementation. Use ACM CDC (or another proprietary) USB serial device for communication. Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid * Revert "Avoid unwanted i/o access." Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types. This reverts commit ae5cb754fb9540794bdb5465a77e1263ca257539. * Adapt to the different error signatures on Linux. So far the code was only tested on Windows. * Added implementation of the alternative hardware type. The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers. * Modify the HD image for the alternative hardware type. It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now. * Fixed shell startup (?) At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away: The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput. Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?) * Upate HD image with recent shell change. * Fix shell shutdown (?) At least on the alternative hardware, things happen this way: 1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete. 2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked. 3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate. 4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it. Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary. * Moved boot text out of IIgs copyright message area. Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up. * Several adjustements: - Get latest Go version as of now. - Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic. - Use 'go mod tidy' to update .sum file for now. - Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now. - Use $USER and $HOME instead of hardcoded values. - Removed deprecated syslog output directives. * Added brief fork description. * Added ProDOS-Utilities reference. * Reverted back to using 'git clone'. I've no idea why git acted up the other day :-( Now, everything is back to normal... * Ignore Pico build directory. * Updated from https://github.com/a2retrosystems/A2retroNET * Updated from https://github.com/a2retrosystems/A2retroNET At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow. In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution. Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware. * Make use of brand new stable Total Replay download URL. Thanks to 4am :-) * Fixed typos. * Clone upstream ProDOS-Utilities. My ProDOS-Utilities pull request was merged. * Added support for boards without LED. * Updated link. * Adjusted to the current A2retroNET hardware. * Removed support for the Pico W. * Updated URL. * Updated URL. * Make use A2Pico library. * Added link to A2Pico. * Remove intermediates from repo. * Build intermediates from Pico build. * Have LED reflect status of logic ACM connection. * Update upstream repo references. * Adjust build instructions. * Update README.md * Fix build and update dependencies * Fix binary comparison * Fix firware bug on classic hardware --------- Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-06 03:49:09 +00:00
.endif
2024-01-03 03:51:33 +00:00
.byte "(c)2020-2024 Terence J. Boldt",$8d
2022-03-02 03:46:03 +00:00
.byte $8d
.byte $00
IdBytes:
.byte $E0,$20,$E0,$00,$E0,$03,$E0,$3C,$A9,$3F
TextCardFound:
.byte "Found Apple2-IO-RPi in slot ",$00
TextCardNotFound:
.byte "Apple2-IO-RPi not found",$8D,$00