Update setup and instructions

ClassicSetup.md

@@ -0,0 +1,27 @@
+## Setup starting from scratch
+1. Have PCBs made from [PCBWay](https://www.pcbway.com/project/shareproject/Apple2_IO_RPi_v6_bfa4be82.html) or from the gerber and drill files in the Hardware folder or email me for a blank or fully assembled board
+2. Solder chips, header and capacitors in place
+3. If you have an EPROM programmer, it is preferred to pre-populate the EEPROM with the contents of AT28C68B.bin
+4. Attach Raspberry Pi Zero 2 W facing outward from the card
+5. Install [Raspberry Pi OS](https://www.raspberrypi.org/software/) on microSD card using a modern computer
+    1. Use Raspberry Pi Imager
+    2. Click "Choose OS"
+    3. Select Other => "Raspberry Pi OS Lite (64 bit)" for the Zero 2 W
+    4. Click on the gear icon in the bottom right
+    5. Enable ssh
+    6. Set password
+    7. Configure wifi
+    8. Set locale settings  
+6. Put microSD card in the RPi
+7. Install the expansion card into the Apple II
+8. Power on the Apple II
+9. Only if you didn't have an EPROM programmer in step 3, install firmware with utility (can be found on Apple2-IO-RPi.hdv drive image in the release on GitHub) 
+10. Use `ssh` to connect to the RPi using the password you configured
+11. `wget --no-cache -O - https://raw.githubusercontent.com/tjboldt/Apple2-IO-RPi/main/RaspberryPi/setup.sh | bash`
+
+## Options
+You can support two drives and change their drive images.
+1. Modify the `ExecStart` line in `/etc/systemd/system/apple2driver.service` and make it something like the following: `ExecStart=/home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -d1 /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv -d2 /home/pi/Apple2-IO-RPi/RaspberryPi/TotalReplay401.hdv`
+2. `sudo systemctl daemon-reload`
+3. `sudo systemctl restart apple2driver.service`
+

PicoSetup.md

@@ -0,0 +1,23 @@
+## Setup starting from scratch
+1. DIY instructions and PCB coming but it is recommended to buy a board from Ralle Palaveev
+2. Attach Raspberry Pi Zero 2 W with a micro USB OTG cable
+3. Install [Raspberry Pi OS](https://www.raspberrypi.org/software/) on microSD card using a modern computer
+    1. Use Raspberry Pi Imager
+    2. Click "Choose OS"
+    3. Select Other => "Raspberry Pi OS Lite (64 bit)" for the Zero 2 W
+    4. Click on the gear icon in the bottom right
+    5. Enable ssh
+    6. Set password
+    7. Configure wifi
+    8. Set locale settings  
+6. Put microSD card in the RPi
+7. Install the expansion card into the Apple II
+8. Power on the Apple II
+9. Use `ssh` to connect to the RPi using the password you configured
+10. `wget --no-cache -O - https://raw.githubusercontent.com/tjboldt/Apple2-IO-RPi/main/RaspberryPi/setup.sh 1 | bash`
+
+## Options
+You can support two drives and change their drive images.
+1. Modify the `ExecStart` line in `/etc/systemd/system/apple2driver.service` and make it something like the following: `ExecStart=/home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -cdc=true -d1 /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv -d2 /home/pi/Apple2-IO-RPi/RaspberryPi/TotalReplay401.hdv`
+2. `sudo systemctl daemon-reload`
+3. `sudo systemctl restart apple2driver.service`

README.md

@@ -31,14 +31,12 @@ Ralle Palaveev has a version of the hardware that uses a RPi Pico to handle firm
 See [List of issues tagged roadmap](https://github.com/tjboldt/Apple2-IO-RPi/issues?q=is%3Aissue+is%3Aopen+label%3Aroadmap+author%3Atjboldt) 
 
 ## Setup on classic hardware
-[Setup card from scratch](https://github.com/tjboldt/Apple2-IO-RPi/discussions/63)
+[Setup card from scratch](/ClassicSetup.md)
-
-[Setup if you received a complete board from me](https://github.com/tjboldt/Apple2-IO-RPi/discussions/64)
 
 [Update to latest](https://github.com/tjboldt/Apple2-IO-RPi/discussions/65)
 
 ## Setup on Pico based hardware
-[Setup card with Pico hardware](https://github.com/tjboldt/Apple2-IO-RPi/discussions/162)
+[Setup card with Pico hardware](/PicoSetup.md)
 
 ## Contributions/Thanks
 - Hans Hübner ([@hanshuebner](https://github.com/hanshuebner)) for help cleaning up schematics

RaspberryPi/setup.sh

@@ -36,6 +36,9 @@ go mod tidy
 go build
 sudo apt install cc65 vim -y
 cd ~ || exit
+cd Apple2-IO-RPI/Apple2 || exit
+./assemble $1
+cd ~ || exit
 
 sudo bash -c 'cat > /boot/config.txt << EOF
 disable_splash=1
@@ -43,9 +46,27 @@ dtoverlay=disable-bt
 boot_delay=0
 EOF'
 sudo bash -c 'echo " quiet" >> /boot/cmdline.txt'
+if [ "$1" = '1' ]; then
 sudo --preserve-env=HOME --preserve-env=USER bash -c 'cat > apple2driver.service << EOF
 [Unit]
-Description=Apple2-IO-RPi Driver
+Description=Apple2-IO-RPi Driver (Pico edition)
+
+[Service]
+ExecStart=$HOME/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -cdc=true
+StandardOutput=syslog
+StandardError=syslog
+SyslogIdentifier=apple2driver
+User=$USER
+Group=$USER
+WorkingDirectory=$HOME/Apple2-IO-RPi/RaspberryPi/apple2driver
+
+[Install]
+WantedBy=basic.target
+EOF'
+else
+sudo --preserve-env=HOME --preserve-env=USER bash -c 'cat > apple2driver.service << EOF
+[Unit]
+Description=Apple2-IO-RPi Driver (Classic edition)
 
 [Service]
 ExecStart=$HOME/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver
@@ -59,6 +80,7 @@ WorkingDirectory=$HOME/Apple2-IO-RPi/RaspberryPi/apple2driver
 [Install]
 WantedBy=basic.target
 EOF'
+fi
 sudo mv apple2driver.service /etc/systemd/system/apple2driver.service  
 sudo chown root:root /etc/systemd/system/apple2driver.service  
 sudo systemctl start apple2driver

RaspberryPiPico/setup.sh

@@ -1,3 +1,5 @@
+#!/bin/sh
+
 sudo apt install cmake gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib -y
 cd ~
 git clone https://github.com/raspberrypi/pico-sdk.git