Apple-2-HW/Apple2-IO-RPi
2
0
Fork 1
mirror of https://github.com/tjboldt/Apple2-IO-RPi.git synced 2024-11-22 02:30:46 +00:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Terence Boldt 2022-02-06 08:13:03 -05:00 committed by GitHub
parent 3ee0978cfa
commit 342a4331af
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@ -9,21 +9,18 @@ The purpose of this project is to provide I/O for an Apple II series 8 bit compu
## Features
1. Boot message which waits for RPi to be ready
2. ProDOS bootable drive from image stored on RPi
3. Execute Linux bash shell on the RPi from the Apple II
4. Load binary files directly from the RPi to the II
5. Update Apple II firmware in place from image on RPi
6. Supports two drive images at the same time (Note: backward compatible with previous firmware but requires firmware update in order to work with two drives)
7. Supports "RPI" command from BASIC to execute Linux commands from the command prompt or inside BASIC programs: `10 PRINT CHR$(4);"RPI ls -al /"`
3. Linux bash shell to the RPi from the Apple II including some VT100 support via `-SHELL` from ProDOS
4. Load binary files directly from the RPi to the II (temporarily removed from firmware but will come back as a utility or dynamic virtual drive
5. Update Apple II firmware in place from image on RPi (note, this is done per slot)
6. Supports two drive images at the same time
7. Supports "RPI" command from BASIC to execute Linux commands from the command prompt or inside BASIC programs: `10 PRINT CHR$(4);"RPI ls -al /"` (Note that currently RPI command only works if the card is in slot 7 but this will be updated)
## Project Status
So far, this is a project and not a finished product. The current prototype is on the fifth revision and a few have been assembled and tested. It is now possible for the Apple II to boot from and write to a virutal hard drive image stored on the RPi in any slot and run a bash shell on the RPi via the Apple II. The code has very few tests and is incomplete. Note that currently the firmware assumes an 80 column card is in slot 3 and than you have lowercase support. If you have a problem or idea for enhancement, log an issue [here](https://github.com/tjboldt/Apple2-IO-RPi/issues). I recommend starring/watching the project for updates on GitHub. You are welcome to fork the project and submit pull requests which I will review.
So far, this is a project and not a finished product. The current prototype is on the fifth revision and about 20 have been assembled and tested. It is now possible for the Apple II to boot from and write to virutal hard drive images stored on the RPi in any slot (except slot 3) and run a bash shell on the RPi via the Apple II. The code has very few tests and is incomplete. Note that currently the firmware assumes an 80 column card is in slot 3 and than you have lowercase support. If you have a problem or idea for enhancement, log an issue [here](https://github.com/tjboldt/Apple2-IO-RPi/issues). I recommend starring/watching the project for updates on GitHub. You are welcome to fork the project and submit pull requests which I will review.
## Roadmap
1. Extend BASIC.SYSTEM commands
1. RPI - Execute a single Linux command (DONE)
2. SH - Open a Linux shell
3. WGET - Download and save to file
2. Shell improvements
1. Allow more than two virutal hard drives at a time
2. In-memory virutal drive representing current working directory in Linux for ease of copying files between Linux and ProDOS
3. Proper ProDOS clock driver (currently just directly sets values on block reads)
4. Bi-directional image conversion between common formats and HIRES
5. Remote code execution