mirror of
https://github.com/tjboldt/Apple2-IO-RPi.git
synced 2024-11-21 11:31:56 +00:00
Update features and setup instructions
This commit is contained in:
parent
7e56516acc
commit
49f99c6c51
32
README.md
32
README.md
@ -15,6 +15,7 @@ So far, this is a project and not a finished product. The current prototype is o
|
||||
3. Execute Linux commands on the RPi from the Apple II
|
||||
4. Load binary files directly from the RPi to the II
|
||||
5. Update Apple II firmware in place from image on RPi
|
||||
6. Supports two drive images at the same time (Note: backward compatible with previous firmware but requires firmware update in order to work with two drives)
|
||||
|
||||
## Roadmap
|
||||
1. Proper ProDOS clock driver (currently just directly sets values on block reads)
|
||||
@ -36,33 +37,34 @@ So far, this is a project and not a finished product. The current prototype is o
|
||||
8. Install the expansion card into the Apple II
|
||||
9. Power on the Apple II
|
||||
10. Update firmware with utility (can be found on Apple2-IO-RPi.hdv drive image) or use EPROM programmer
|
||||
11. sudo apt install git golang
|
||||
12. git clone https://github.com/tjboldt/Apple2-IO-RPi.git
|
||||
13. cd Apple2-IO-RPi/RaspberryPi/apple2driver
|
||||
14. go get
|
||||
15. go build
|
||||
16. ./apple2driver ../Apple2-IO-RPi.hdv
|
||||
18. Setup the Driver as a service or to autostart via cronjob (crontab -e then add the line @reboot /home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv > /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.log)
|
||||
11. `sudo apt install git golang`
|
||||
12. `git clone https://github.com/tjboldt/Apple2-IO-RPi.git`
|
||||
13. `cd Apple2-IO-RPi/RaspberryPi/apple2driver`
|
||||
14. `go get`
|
||||
15. `go build`
|
||||
16. `./apple2driver`
|
||||
17. Optional to step above, `./apple2driver -d1 YOUR_DRIVE.hdv` (Apple2-IO-RPi.hdv is automatically selected as drive 2), or `./apple2driver -d1 YOUR_DRIVE.hdv -d2 YOUR_SECOND_DRIVE.hdv`
|
||||
18. Setup the Driver as a service or to autostart via cronjob (`crontab -e` then add the line `@reboot /home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -d1 YOUR_DRIVE.hdv -d2 /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv > /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.log`)
|
||||
|
||||
## Setup if you received a complete board from me
|
||||
1. Put in any slot (slot 7 preferred as it is the first to boot)
|
||||
2. Turn on your Apple II
|
||||
3. Wait for the RPi to start up (will show ... until it connects)
|
||||
4. Select "2" from the menu to run a command
|
||||
5. Type "a2wifi list" to check that you have a wireless network in range
|
||||
6. Type "a2wifi select YOUR_SSID YOUR_PASSWORD" to connect the RPi to your network
|
||||
7. Once connected, you should be able to ssh to the RPi from any computer if you want. From a Mac or Linux (or Windows with Bash) shell, type "ssh pi@raspberrypi". The default password is "raspberry".
|
||||
8. Rebooting the Apple II, you can then select "1" from the menu and it will boot to ProDOS 2.4.2 and you will have a mostly blank 32 MB drive with a couple of utilities for updating firmware and such.
|
||||
4. Select `2` from the menu to run a command
|
||||
5. Type `a2wifi list` to check that you have a wireless network in range
|
||||
6. Type `a2wifi select YOUR_SSID YOUR_PASSWORD` to connect the RPi to your network
|
||||
7. Once connected, you should be able to ssh to the RPi from any computer if you want. From a Mac or Linux (or Windows with Bash) shell, type `ssh pi@raspberrypi`. The default password is `raspberry`.
|
||||
8. Rebooting the Apple II, you can then select `1` from the menu and it will boot to ProDOS 2.4.2 and you will have a mostly blank 32 MB drive with a couple of utilities for updating firmware and such.
|
||||
9. Star and Watch this repo on GitHub for the latest updates
|
||||
|
||||
## Update
|
||||
1. Restart Apple II
|
||||
2. Select run command
|
||||
3. cd /home/pi/Apple2-IO-RPi
|
||||
4. git pull
|
||||
3. `cd /home/pi/Apple2-IO-RPi`
|
||||
4. `git pull`
|
||||
5. Restart Apple II
|
||||
6. Select boot
|
||||
7. -UPDATE.FIRMWARE
|
||||
7. `-UPDATE.FIRMWARE`
|
||||
8. Enter slot number the card is in
|
||||
9. Wait for firmware update to complete all four pages
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user