Apple-2-HW/Apple2-IO-RPi
2
0
Fork 1
mirror of https://github.com/tjboldt/Apple2-IO-RPi.git synced 2024-11-25 06:31:22 +00:00
Code Issues Projects Releases Wiki Activity

Update project status and image

Browse Source
This commit is contained in:
Terence Boldt 2020-12-10 23:13:12 -05:00
parent b8f5fcc34d
commit b0b077b1a2
2 changed files with 5 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
Hardware/Apple2IORPi.jpg
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 66 KiB

After

Width:  |  Height:  |  Size: 88 KiB

11
README.md
View File

@ -4,7 +4,7 @@ Apple II expansion card using a Raspberry Pi for I/O
![Image of Board](/Hardware/Apple2IORPi.jpg)
## Project Status
This is a very early stage project. Currently one board has been assembled and tested. There is no firmware, however with some simple Go and Node.js code, it was determined that communications are working and Go is significantly faster.
This is an early stage project. Currently one board has been assembled and tested. Running the driver from RAM, it is now possible for the Apple II to read and write to a virutal hard drive image stored on the RPi assuming the card is in slot 5 only. The code has no error handling or tests yet and is incomplete. There is no EPROM firmware yet.
## Purpose
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. Initially this would be storage via virtual ProDOS compatible drive. Next might be adding virtual serial card support over wifi. Future enhancements could use the RPi for more complex processing as per request from the Apple II. For example, the Apple II could request a web page or application and the RPi could calculate this in Apple II hi-res graphics mode and send the image data back to the II for display purposes.
@ -19,11 +19,10 @@ The purpose of this project is to provide I/O for an Apple II series 8 bit compu
7. Put microSD card in the RPi
8. Install the expansion card into the Apple II
9. Power on the Apple II
10. Install NodeJS 11 for ARMv6 on the RPi over ssh
11. sudo npm install -g pm2
12. pm2 startup systemd
13. Run the command from the output of the previous step
14. pm2 start server.js
10. Install Go on the RPi over ssh
11. go build Driver.go
12. Copy a ProDOS hard drive image onto the RPi
13. ./Driver HARDDRIVE.hdv
## Similar Project
If you're looking for complete hardware design or prefer having Apple II peripherals control a control a Raspberry Pi rather than simply using the Raspberry Pi to provide storage and network access to the Apple II, have a look at David Schmenk's excellent [Apple2Pi](https://github.com/dschmenk/apple2pi) project.