mirror of
https://github.com/tjboldt/Apple2-IO-RPi.git
synced 2024-10-31 14:08:27 +00:00
Update firmware to support Pascal communications
This commit is contained in:
Terence Boldt
parent
1336371b49
commit
c07dcdd52e
@ -2,8 +2,9 @@
|
||||
; Use of this source code is governed by an MIT
|
||||
; license that can be found in the LICENSE file.
|
||||
|
||||
; This file contains the source for the firmware
|
||||
; that was formerly used to act as a pseudo-shell
|
||||
; This file formerly contained the source for the
|
||||
; firmware that had a pseudo command prompt
|
||||
; but is now empty except required common bytes
|
||||
|
||||
;ProDOS Zero Page
|
||||
Command = $42 ;ProDOS Command
|
||||
@ -32,141 +33,41 @@ LoadFileCommand = $06
|
||||
SaveFileCommand = $07
|
||||
MenuCommand = $08
|
||||
|
||||
InputString = $fd67
|
||||
PrintChar = $fded
|
||||
Keyboard = $c000
|
||||
ClearKeyboard = $c010
|
||||
Wait = $fca8
|
||||
|
||||
.org SLOT*$100 + $C000
|
||||
;ID bytes for booting and drive detection
|
||||
cpx #$20 ;ID bytes for ProDOS and the
|
||||
cpx #$00 ; Apple Autostart ROM
|
||||
cpx #$20 ;ID bytes for ProDOS
|
||||
cpx #$00 ;
|
||||
cpx #$03 ;
|
||||
cpx #$3C ;ID byte for Autostart ROM
|
||||
|
||||
ldx #SLOT*$10
|
||||
stx $2b
|
||||
stx Unit
|
||||
|
||||
;force EPROM to second page on boot
|
||||
lda #$3f ;set all flags high and page 3 of EPROM for menu
|
||||
jmp PageJump
|
||||
|
||||
;The following bytes must exist in this location for Pascal communications
|
||||
;as they are standard pointers for entry points
|
||||
.byte CommInit&$00FF ;low byte of rts for init of Pascal comms
|
||||
.byte $43 ; low byte of read for Pascal comms
|
||||
.byte $49 ; low byte of write for Pascal comms
|
||||
.byte $4F ; low byte of rts for status of Pascal comms
|
||||
|
||||
CommInit:
|
||||
lda #$0f ; set all flags high and page 0 for comm driver
|
||||
sta OutputFlags
|
||||
ldx #$00 ; set error code to 0 for success
|
||||
rts
|
||||
|
||||
PageJump:
|
||||
sta OutputFlags
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$2f
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$0f
|
||||
|
||||
;entry points for ProDOS
|
||||
DriverEntry:
|
||||
lda #$0f ;set all flags high and page 0 of EPROM
|
||||
sta OutputFlags
|
||||
jmp Start ; this is never called as the EPROM page changes
|
||||
|
||||
;load first two blocks and execute to boot
|
||||
Start:
|
||||
jsr $c300 ;enable 80 columns
|
||||
lda #$05 ;execute command
|
||||
jsr SendByte
|
||||
ldy #$00
|
||||
sendHelp:
|
||||
lda HelpCommand,y
|
||||
beq endSendHelp
|
||||
jsr SendByte
|
||||
iny
|
||||
bne sendHelp
|
||||
endSendHelp:
|
||||
lda #$00
|
||||
jsr SendByte
|
||||
jsr DumpOutput
|
||||
|
||||
lda $33
|
||||
pha
|
||||
lda #$a4
|
||||
sta $33
|
||||
GetCommand:
|
||||
jsr InputString
|
||||
lda $0200
|
||||
cmp #$8d ;skip when return found
|
||||
beq GetCommand
|
||||
jsr SendCommand
|
||||
clc
|
||||
bcc GetCommand
|
||||
|
||||
SendCommand:
|
||||
bit ClearKeyboard
|
||||
lda #$05 ;send command 5 = exec
|
||||
jsr SendByte
|
||||
ldy #$00
|
||||
getInput:
|
||||
lda $0200,y
|
||||
cmp #$8d
|
||||
beq sendNullTerminator
|
||||
and #$7f
|
||||
jsr SendByte
|
||||
iny
|
||||
bne getInput
|
||||
sendNullTerminator:
|
||||
lda #$00
|
||||
jsr SendByte
|
||||
DumpOutput:
|
||||
jsr GetByte
|
||||
bcs skipOutput
|
||||
cmp #$00
|
||||
beq endOutput
|
||||
jsr PrintChar
|
||||
skipOutput:
|
||||
bit Keyboard ;check for keypress
|
||||
bpl DumpOutput ;keep dumping output if no keypress
|
||||
lda Keyboard ;send keypress to RPi
|
||||
jsr PrintChar
|
||||
and #$7f
|
||||
jsr SendByte
|
||||
bit ClearKeyboard
|
||||
clc
|
||||
bcc DumpOutput
|
||||
endOutput:
|
||||
rts
|
||||
|
||||
HelpCommand:
|
||||
.byte "a2help",$00
|
||||
|
||||
SendByte:
|
||||
bit InputFlags
|
||||
bvs SendByte
|
||||
sta OutputByte
|
||||
.if HW_TYPE = 0
|
||||
lda #$1e ; set bit 0 low to indicate write started
|
||||
sta OutputFlags
|
||||
finishWrite:
|
||||
bit InputFlags
|
||||
bvc finishWrite
|
||||
lda #$1f
|
||||
sta OutputFlags
|
||||
.endif
|
||||
rts
|
||||
|
||||
GetByte:
|
||||
.if HW_TYPE = 0
|
||||
ldx #$1d ;set read flag low
|
||||
stx OutputFlags
|
||||
.endif
|
||||
waitRead:
|
||||
bit InputFlags
|
||||
bpl readByte
|
||||
bit Keyboard ;keypress will abort waiting to read
|
||||
bpl waitRead
|
||||
.if HW_TYPE = 0
|
||||
lda #$1f ;set all flags high and exit
|
||||
sta OutputFlags
|
||||
.endif
|
||||
sec ;failure
|
||||
rts
|
||||
readByte:
|
||||
lda InputByte
|
||||
.if HW_TYPE = 0
|
||||
ldx #$1f ;set all flags high
|
||||
stx OutputFlags
|
||||
finishRead:
|
||||
bit InputFlags
|
||||
bpl finishRead
|
||||
.endif
|
||||
clc ;success
|
||||
end:
|
||||
rts
|
||||
|
||||
@ -175,5 +76,6 @@ end:
|
||||
.endrepeat
|
||||
|
||||
.byte 0,0 ;0000 blocks = check status
|
||||
.byte 7 ;bit set(0=status 1=read 2=write) unset(3=format, 4/5=number of volumes, 6=interruptable, 7=removable)
|
||||
.byte 23 ;bit set(0=status 1=read 2=write) unset(3=format, 4/5=number of volumes, 6=interruptable, 7=removable)
|
||||
.byte DriverEntry&$00FF ;low byte of entry
|
||||
|
||||
|
||||
@ -36,16 +36,27 @@ MenuCommand = $08
|
||||
|
||||
.org SLOT*$100 + $C000
|
||||
;ID bytes for booting and drive detection
|
||||
cpx #$20 ;ID bytes for ProDOS and the
|
||||
cpx #$00 ; Apple Autostart ROM
|
||||
cpx #$20 ;ID bytes for ProDOS
|
||||
cpx #$00 ;
|
||||
cpx #$03 ;
|
||||
cpx #$3C ;ID byte for Autostart ROM
|
||||
|
||||
ldx #SLOT*$10
|
||||
stx $2b
|
||||
stx Unit
|
||||
|
||||
;force EPROM to second page on boot
|
||||
lda #$3f ;set all flags high and page 3 of EPROM for menu
|
||||
jmp PageJump
|
||||
|
||||
;The following bytes must exist in this location for Pascal communications
|
||||
;as they are standard pointers for entry points
|
||||
.byte CommInit&$00FF ;low byte of rts for init of Pascal comms
|
||||
.byte CommRead&$00FF ; low byte of read for Pascal comms
|
||||
.byte CommWrite&$00FF ; low byte of write for Pascal comms
|
||||
.byte CommStatus&$00FF ; low byte of rts for status of Pascal comms
|
||||
|
||||
CommInit:
|
||||
lda #$0f ; set all flags high and page 0 for comm driver
|
||||
sta OutputFlags
|
||||
ldx #$00 ; set error code to 0 for success
|
||||
rts
|
||||
|
||||
PageJump:
|
||||
sta OutputFlags
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$0f
|
||||
@ -58,6 +69,10 @@ DriverEntry:
|
||||
|
||||
;load first two blocks and execute to boot
|
||||
Start:
|
||||
ldx #SLOT*$10
|
||||
stx $2b
|
||||
stx Unit
|
||||
|
||||
lda #$01 ;set read command
|
||||
sta Command
|
||||
|
||||
@ -71,6 +86,21 @@ Start:
|
||||
|
||||
jmp $801 ;execute the block
|
||||
|
||||
CommRead:
|
||||
jsr GetByte
|
||||
ldx #$00 ; clear error code
|
||||
rts
|
||||
|
||||
CommWrite:
|
||||
jsr SendByte
|
||||
ldx #$00 ; clear error code
|
||||
rts
|
||||
|
||||
CommStatus:
|
||||
ldx #$00 ; clear error code
|
||||
sec ; set carry to indicate ready to read or write
|
||||
rts
|
||||
|
||||
; ProDOS Driver code
|
||||
; First check that this is the right drive
|
||||
Driver:
|
||||
@ -78,7 +108,7 @@ Driver:
|
||||
lda Command; Check which command is being requested
|
||||
beq GetStatus ;0 = Status command
|
||||
cmp #ReadBlockCommand
|
||||
beq ReadBlockAndSetTime
|
||||
beq ReadBlock
|
||||
cmp #WriteBlockCommand
|
||||
beq WriteBlock
|
||||
sec ;set carry as we don't support any other commands
|
||||
@ -94,22 +124,7 @@ GetStatus:
|
||||
rts
|
||||
|
||||
; ProDOS Read Block Command
|
||||
ReadBlockAndSetTime:
|
||||
lda BlockHi ; only get the time if block 0002
|
||||
bne readBlock
|
||||
lda BlockLo
|
||||
cmp #$02
|
||||
bne readBlock
|
||||
ldy #$00 ;Get the current time on each block read for now
|
||||
lda #GetTimeCommand
|
||||
jsr SendByte
|
||||
getTimeByte:
|
||||
jsr GetByte
|
||||
sta $bf90,y
|
||||
iny
|
||||
cpy #$04
|
||||
bne getTimeByte
|
||||
readBlock:
|
||||
ReadBlock:
|
||||
lda #ReadBlockCommand ;read the block after setting the clock
|
||||
jsr SendByte
|
||||
lda BlockLo
|
||||
|
||||
@ -2,9 +2,9 @@
|
||||
; Use of this source code is governed by an MIT
|
||||
; license that can be found in the LICENSE file.
|
||||
|
||||
; This file contains the source for the firmware
|
||||
; that was formerly used to copy files from RPi
|
||||
; to Apple II RAM
|
||||
; This file formerly contained the source for the
|
||||
; firmware that had a file access
|
||||
; but is now empty except required common bytes
|
||||
|
||||
;ProDOS Zero Page
|
||||
Command = $42 ;ProDOS Command
|
||||
@ -33,117 +33,41 @@ LoadFileCommand = $06
|
||||
SaveFileCommand = $07
|
||||
MenuCommand = $08
|
||||
|
||||
InputString = $fd67
|
||||
Monitor = $ff59
|
||||
|
||||
.org SLOT*$100 + $C000
|
||||
;ID bytes for booting and drive detection
|
||||
cpx #$20 ;ID bytes for ProDOS and the
|
||||
cpx #$00 ; Apple Autostart ROM
|
||||
cpx #$20 ;ID bytes for ProDOS
|
||||
cpx #$00 ;
|
||||
cpx #$03 ;
|
||||
cpx #$3C ;ID byte for Autostart ROM
|
||||
|
||||
ldx #SLOT*$10
|
||||
stx $2b
|
||||
stx Unit
|
||||
|
||||
;force EPROM to second page on boot
|
||||
lda #$3f ;set all flags high and page 3 of EPROM for menu
|
||||
jmp PageJump
|
||||
|
||||
;The following bytes must exist in this location for Pascal communications
|
||||
;as they are standard pointers for entry points
|
||||
.byte CommInit&$00FF ;low byte of rts for init of Pascal comms
|
||||
.byte $43 ; low byte of read for Pascal comms
|
||||
.byte $49 ; low byte of write for Pascal comms
|
||||
.byte $4F ; low byte of rts for status of Pascal comms
|
||||
|
||||
CommInit:
|
||||
lda #$0f ; set all flags high and page 0 for comm driver
|
||||
sta OutputFlags
|
||||
ldx #$00 ; set error code to 0 for success
|
||||
rts
|
||||
|
||||
PageJump:
|
||||
sta OutputFlags
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$2f
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$0f
|
||||
|
||||
;entry points for ProDOS
|
||||
DriverEntry:
|
||||
lda #$0f ;set all flags high and page 0 of EPROM
|
||||
sta OutputFlags
|
||||
jmp Start ; this is never called as the EPROM page changes
|
||||
|
||||
;load first two blocks and execute to boot
|
||||
Start:
|
||||
lda #$a4
|
||||
sta $33
|
||||
|
||||
GetFilename:
|
||||
jsr InputString
|
||||
|
||||
LoadFile:
|
||||
lda #$00
|
||||
sta BufferLo
|
||||
lda #$20
|
||||
sta BufferHi
|
||||
lda #$06 ; send command 6 = load
|
||||
jsr SendByte
|
||||
ldy #$00
|
||||
sendFilename:
|
||||
lda $0200,y
|
||||
cmp #$8d
|
||||
beq sendNullTerminator
|
||||
and #$7f
|
||||
jsr SendByte
|
||||
iny
|
||||
bne sendFilename
|
||||
sendNullTerminator:
|
||||
lda #$00
|
||||
jsr SendByte
|
||||
|
||||
jsr GetByte
|
||||
sta BlockLo ; not really a block, just using the memory space
|
||||
jsr GetByte
|
||||
sta BlockHi
|
||||
NextPage:
|
||||
lda BlockHi
|
||||
beq ReadFinalPage
|
||||
ldy #$00
|
||||
NextByte:
|
||||
jsr GetByte
|
||||
sta (BufferLo),y
|
||||
iny
|
||||
bne NextByte
|
||||
inc BufferHi
|
||||
dec BlockHi
|
||||
bne NextPage
|
||||
ReadFinalPage:
|
||||
lda BlockLo
|
||||
beq ExitToMonitor
|
||||
ldy #$00
|
||||
NextByteFinal:
|
||||
jsr GetByte
|
||||
sta (BufferLo),y
|
||||
iny
|
||||
cpy BlockLo
|
||||
bne NextByteFinal
|
||||
ExitToMonitor:
|
||||
jsr Monitor
|
||||
|
||||
SendByte:
|
||||
bit InputFlags
|
||||
bvs SendByte
|
||||
sta OutputByte
|
||||
.if HW_TYPE = 0
|
||||
lda #$2e ; set bit 0 low to indicate write started
|
||||
sta OutputFlags
|
||||
finishWrite:
|
||||
bit InputFlags
|
||||
bvc finishWrite
|
||||
lda #$2f
|
||||
sta OutputFlags
|
||||
.endif
|
||||
rts
|
||||
|
||||
GetByte:
|
||||
.if HW_TYPE = 0
|
||||
ldx #$2d ;set read flag low
|
||||
stx OutputFlags
|
||||
.endif
|
||||
waitRead:
|
||||
bit InputFlags
|
||||
bmi waitRead
|
||||
lda InputByte
|
||||
.if HW_TYPE = 0
|
||||
ldx #$2f ;set all flags high
|
||||
stx OutputFlags
|
||||
finishRead:
|
||||
bit InputFlags
|
||||
bpl finishRead
|
||||
.endif
|
||||
end:
|
||||
rts
|
||||
|
||||
@ -152,6 +76,6 @@ end:
|
||||
.endrepeat
|
||||
|
||||
.byte 0,0 ;0000 blocks = check status
|
||||
.byte 7 ;bit set(0=status 1=read 2=write) unset(3=format, 4/5=number of volumes, 6=interruptable, 7=removable)
|
||||
.byte 23 ;bit set(0=status 1=read 2=write) unset(3=format, 4/5=number of volumes, 6=interruptable, 7=removable)
|
||||
.byte DriverEntry&$00FF ;low byte of entry
|
||||
|
||||
|
||||
@ -47,19 +47,30 @@ htab80 = $057b
|
||||
|
||||
.org SLOT*$100 + $C000
|
||||
;ID bytes for booting and drive detection
|
||||
cpx #$20 ;ID bytes for ProDOS and the
|
||||
cpx #$00 ; Apple Autostart ROM
|
||||
cpx #$20 ;ID bytes for ProDOS
|
||||
cpx #$00 ;
|
||||
cpx #$03 ;
|
||||
cpx #$3C ;ID byte for Autostart ROM
|
||||
|
||||
ldx #SLOT*$10
|
||||
stx $2b
|
||||
stx Unit
|
||||
lda #$3f ;set all flags high and page 3 of EPROM for menu
|
||||
jmp PageJump
|
||||
|
||||
;The following bytes must exist in this location for Pascal communications
|
||||
;as they are standard pointers for entry points
|
||||
.byte CommInit&$00FF ;low byte of rts for init of Pascal comms
|
||||
.byte $43 ; low byte of read for Pascal comms
|
||||
.byte $49 ; low byte of write for Pascal comms
|
||||
.byte $4F ; low byte of rts for status of Pascal comms
|
||||
|
||||
CommInit:
|
||||
lda #$0f ; set all flags high and page 0 for comm driver
|
||||
sta OutputFlags
|
||||
ldx #$00 ; set error code to 0 for success
|
||||
rts
|
||||
|
||||
;force EPROM to second page on boot
|
||||
lda #$3f ;set all flags high and page 1 of EPROMi
|
||||
PageJump:
|
||||
sta OutputFlags
|
||||
jmp Start
|
||||
jmp Start ;this jump is only called if coming in from PageJump with A=$0f
|
||||
|
||||
;entry points for ProDOS
|
||||
DriverEntry:
|
||||
@ -191,9 +202,9 @@ Text:
|
||||
.byte "(c)2020-2024 Terence J. Boldt",$8d
|
||||
.byte $8d
|
||||
.if HW_TYPE = 0
|
||||
.byte "Waiting for RPi FW:0010..."
|
||||
.byte "Waiting for RPi FW:0011"
|
||||
.else
|
||||
.byte "Waiting for RPi FW:8010..."
|
||||
.byte "Waiting for RPi FW:8011"
|
||||
.endif
|
||||
end:
|
||||
.byte $00
|
||||
@ -205,4 +216,3 @@ end:
|
||||
.byte 0,0 ;0000 blocks = check status
|
||||
.byte 7 ;bit set(0=status 1=read 2=write) unset(3=format, 4/5=number of volumes, 6=interruptable, 7=removable)
|
||||
.byte DriverEntry&$00FF ;low byte of entry
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user