Apple-2-HW/Apple2-IO-RPi
2
0
Fork 1
mirror of https://github.com/tjboldt/Apple2-IO-RPi.git synced 2024-11-22 02:30:46 +00:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Terence Boldt 2021-03-29 08:47:21 -04:00 committed by GitHub
parent 4629de29ea
commit e883a742c7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 11 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
README.md
View File

@ -4,22 +4,23 @@ Apple II expansion card using a Raspberry Pi for I/O
![Image of Board](/Hardware/Apple2IORPi.jpg)
## Purpose
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This includes using attached RPi Zero W for it's storage, network and processor to provide new functionality for the Apple II.
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This includes using the attached RPi Zero W for it's storage, network and processor to provide new functionality for the Apple II.
## Project Status
So far, this is a project and not a finished product. The current prototype is on the fourth revision and a few have been assembled and tested. It is now possible for the Apple II to boot from and write to a virutal hard drive image stored on the RPi in any slot and execute simple commands on the RPi via the Apple II. The code has no error handling or tests yet and is incomplete.
## Roadmap
1. Wifi setup tool
1. Detect when RPi is in a ready state
2. Help in command line
3. Software on default image to get firmware updates
4. Proper ProDOS clock driver (currently just directly sets values on block reads)
5. Support for direct file read/write without drive image
6. Image conversion on download
7. Web service call support
8. Full terminal emulation
9. Remote code execution
10. Proxy VNC connection, rendering as Apple II compatible graphics
3. Wifi setup tool
4. Software on default image to get firmware updates
5. Proper ProDOS clock driver (currently just directly sets values on block reads)
6. Support for direct file read/write without drive image
7. Image conversion on download
8. Web service call support
9. Full terminal emulation
10. Remote code execution
11. Proxy VNC connection, rendering as Apple II compatible graphics
## Setup
1. Have PCBs made from the gerber and drill files in the Hardware folder or email me for a blank or fully assembled board