diff --git a/Apple2/test.asm b/Apple2/test.asm
deleted file mode 100644
index f90a23e..0000000
--- a/Apple2/test.asm
+++ /dev/null
@@ -1,11 +0,0 @@
-	ldx	#$50	;slot 5 for this test
-start:	lda	#$80	;set read flag low (ready to read)
-	sta	$c08d,x	;bit 1 low for writing values
-waitwl:	lda	$c08e,x	;bit 0 low for reading values
-	bmi	waitwl	;wait for write flag low	
-	jsr	$fde3	;print nibble of data
-	lda 	#$c0	;set read flag high (done reading)
-	sta	$c08d,x
-waitwh:	lda	$c08e,x
-	bpl	waitwh	;wait for write flag high
-	bmi	start	;go around againg for next nibble
diff --git a/Apple2/test_assemble.sh b/Apple2/test_assemble.sh
deleted file mode 100755
index 8b1c025..0000000
--- a/Apple2/test_assemble.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-ca65 test.asm
-ld65 test.o -o test.bin -t none
diff --git a/README.md b/README.md
index 02ad737..0b93c07 100644
--- a/README.md
+++ b/README.md
@@ -13,8 +13,8 @@ This is an early stage project. Currently one board has been assembled and teste
 1. DONE - Build initial prototype that reads/writes virtual hard drive
 2. DONE - Create firmware to make the card a bootable device
 3. DONE - Fix board with updated second prototype PCB
-4. DONE - Add ProDOS clock driver
-5. Add RPi terminal access
+4. WORKING - Add ProDOS clock driver (real driver later, for now just directly sets values)
+5. WORKING - Add RPi terminal access (does not keep context between commands yet)
 6. Add web service call support
 7. Proxy VNC connection, rendering as Apple II compatible graphics
 8. Create new schematic/PCB with faster data transfer