Update README.md

This commit is contained in:
Manfred 2019-05-10 16:39:17 +02:00 committed by GitHub
parent a906289064
commit 86cc0dd6ed
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -14,10 +14,10 @@ Hardware:
Software: Software:
- Arduino IDE - Arduino IDE
- USB Host Shield Library 2.0 (The modified Version included in theis Repo!) - USB Host Shield Library 2.0 (The modified Version included in this repo!)
### Installation ### Installation
- Create a folder "Apple_II_Keyboard" under your sketches dir and copy all files from the root dir of this repo there (The dir where the .inop lies). - Create a folder "Apple_II_Keyboard" under your sketches dir and copy all files from the root dir of this repo there (The dir where the .ino lies).
- Copy the "USB_Host_Shield_Library_2.0" dir to you libraries dir. - Copy the "USB_Host_Shield_Library_2.0" dir to you libraries dir.
- Select Uno as board in the Arduino IDE - Select Uno as board in the Arduino IDE
- Use Upload in the Arduino IDE. If you can see some output in the serial monitor as you type everythin works. - Use Upload in the Arduino IDE. If you can see some output in the serial monitor as you type everythin works.
@ -45,3 +45,8 @@ This Table shows how to connect the Apple II Keyboard Connector (A7) to the Ardu
| 16 | NC | NC | | 16 | NC | NC |
### Setting the Arduino USB Host Shield for 5V operation
![Correctly jumpered Host Shield](https://github.com/mafrmt00/Apple_II_Keyboard/blob/master/pictures/USB_Host_Shield.jpg "Correctly jumpered Host Shield")
Make sure to set the solder jumpers as shoen in the picture. The Apple II and the UNO operate at 5V.