FloppyEmuDiskIIEnclosure/scad/components/rear.scad

59 lines
2.4 KiB
OpenSCAD
Raw Normal View History

2022-05-16 22:06:31 +00:00
// Copyright 2022 Thorsten Brehm
// brehmt (at) gmail dot com
// rear panel
module makeRear()
{
Width = BoxX_Width-2*RearWallGap;
difference()
{
translate([RearWallGap, 0, BoxZ_Depth-RearWallZOffset-RearWallZLedge])
rotate([90, 0, 90])
{
difference()
{
roundedCube(BoxY_Height, RearWallZLedge, Width, Box_Corner_Radius);
translate([SKIN, -SKIN, 0]) roundedCube(BoxY_Height, RearWallZLedge, Width, Box_Corner_Radius);
translate([BoxY_Height-RearWallGap-RearWallCableGapHeight,RearWallZLedge-SKIN*2,0])
cube([RearWallCableGapHeight+10, SKIN*2, Width]);
}
}
// hole
translate([FrontGapX/2, -SKIN , BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
hole(ScrewDiameter, 10);
// hole
translate([BoxX_Width-FrontGapX/2, -SKIN , BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
hole(ScrewDiameter, 10);
}
// long edge, top of rear wall
translate([RearWallGap, BoxY_Height-RearWallGap-RearWallCableGapHeight-5, BoxZ_Depth-RearWallZOffset-SKIN])
roundedCube(BoxX_Width-RearWallCableGapWidth-RearWallCableGapXOffset, RearWallCableGapHeight+5, SKIN, Box_Corner_Radius);
// short edge, top of rear wall
translate([BoxX_Width-RearWallGap-RearWallCableGapXOffset, BoxY_Height-RearWallGap-RearWallCableGapHeight-5, BoxZ_Depth-RearWallZOffset-SKIN])
roundedCube(RearWallCableGapXOffset, RearWallCableGapHeight+5, SKIN, Box_Corner_Radius);
// screw posts
translate([FrontGapX/2, SKIN , BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
screwPost(ScrewPostHeight, ScrewPostDiameter, ScrewDiameter, ScrewPostHeight, ScrewPostFillet);
translate([BoxX_Width-FrontGapX/2, SKIN , BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
screwPost(ScrewPostHeight, ScrewPostDiameter, ScrewDiameter, ScrewPostHeight, ScrewPostFillet);
// support triangles for stability
SupportWidth = RearWallZLedge-SKIN*2;
// left
translate([RearWallGap+Box_Corner_Radius, SKIN, BoxZ_Depth-RearWallZOffset-SupportWidth-SKIN])
rotate([270, 180, 0]) prism(SKIN, SupportWidth, SupportWidth);
// right
translate([BoxX_Width-Box_Corner_Radius-SKIN, SKIN, BoxZ_Depth-RearWallZOffset-SupportWidth-SKIN])
rotate([270, 180, 0]) prism(SKIN, SupportWidth, SupportWidth);
// center
translate([(BoxX_Width-Box_Corner_Radius-SKIN)/2, SKIN, BoxZ_Depth-RearWallZOffset-SupportWidth-SKIN])
rotate([270, 180, 0]) prism(SKIN, SupportWidth, SupportWidth);
}