Apple-2-HW
/
FloppyEmuDiskIIEnclosure
mirror of https://github.com/ThorstenBr/FloppyEmuDiskIIEnclosure.git
2
0
Fork 1
Code Issues Projects Releases Wiki Activity

Update README.md

This commit is contained in:
ThorstenB 2022-05-17 19:09:20 +02:00 committed by GitHub
parent 6b5987e48a
commit 86a14fc613
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@ -57,11 +57,17 @@ I suggest you solder all wires to a 2x5 pin header (or boxed header), so you can
![Wiring3](/resources/Wiring3.jpg?raw=true)
## 3D Print
3D printing is straight forward. The models should be printed with their flat side facing downwards. Preferably use white or light gray filament for the top shell, base plate, and for the rear panel. Use black filament for the front panel and the buttons.
3D printing is straight forward. The models should be printed with their flat side facing downwards.
![3DPrint4](/resources/3D_Print4.jpg?raw=true)
Preferably use white or light gray filament for the top shell, base plate, and for the rear panel. Use black filament for the front panel and the buttons.
The models are optimized to reduce 3D "supports", however, the top shell and the front panel still need "supports" to be enabled when printing.
The buttons should be printed without supports.
![3DPrint5](/resources/3D_Print5.jpg?raw=true)
The large grooves on the top shell do require supports though - since this model should be printed upside down:
![3DPrint1](/resources/3D_Print1.jpg?raw=true)
@ -74,10 +80,6 @@ The rear panel and the front panel require supports - but only in tiny areas.
![3DPrint3](/resources/3D_Print3.jpg?raw=true)
The buttons should be printed without supports.
![3DPrint4](/resources/3D_Print4.jpg?raw=true)
### Print Duration
The top shell takes about 7 hours to print on an Ender 3v2.
The front and rear panel require about 1:30 hours.