mirror of
https://github.com/ThorstenBr/FloppyEmuDiskIIEnclosure.git
synced 2024-11-22 13:32:52 +00:00
4c5e315a05
which provides much better stability. The strain-relief is angled, so the bracket can still be attached and screwed when the top shell and base board are glued.
44 lines
1.4 KiB
OpenSCAD
44 lines
1.4 KiB
OpenSCAD
// Copyright 2022 Thorsten Brehm
|
|
// brehmt (at) gmail dot com
|
|
|
|
// Which part do you want to see/generate?
|
|
PART = "bottom"; // [button:Buttons and Brackets, bottom:Base board element, top:Top shell, rear:Rear panel, front:Front panel, test:--Test--, all:All elements, noRear:All except the rear panel, noFront:All except front panel, noBottom: All except base board, frontBottom: Front and base board only, topBottom: Top shell and base board only]
|
|
|
|
// Size of the LCD display?
|
|
LCD = "yes"; // [small:Original 1.7inch display, large:Custom large 2.42inch display]
|
|
|
|
// show FloppyEmu PCB?
|
|
PCB = "no"; // [no:No,yes:Yes]
|
|
|
|
// Size of the box: 1.0=original Disk II drive size, 0.6='baby box', just matching floppy EMU size
|
|
SCALING = 0.6; // [0.1 : 0.01 : 1]
|
|
|
|
// Which/how many LEDs?
|
|
LEDs = "one"; // [one:One / Activity LED,two:Both / Activity and Power LEDs]
|
|
|
|
/* [Internals] */
|
|
// Base board imprint
|
|
IMPRINT = "MADE IN GERMANY"; // 30
|
|
|
|
// Distance of the components (when showing 'exploded' elements)
|
|
SEPARATION = 30; // [0: 1: 100]
|
|
|
|
// Add cable strain-relief to top shell
|
|
STRAIN_RELIEF = "yes"; // [no:No,yes:Yes]
|
|
|
|
/* [Hidden] */
|
|
// Use prototype cutouts to save filament?
|
|
prototype = "no"; // [no:No,yes:Yes]
|
|
|
|
// Add 3D print supports
|
|
supports = "yes"; // [no:No,yes:Yes]
|
|
|
|
showPcb = PCB;
|
|
part = PART;
|
|
ComponentSeparation = SEPARATION;
|
|
ScalingFactor = SCALING;
|
|
LedCount = (LEDs == "two") ? 2 : 1;
|
|
|
|
include <components/main.scad>
|
|
|