mirror of
https://github.com/ThorstenBr/FloppyEmuDiskIIEnclosure.git
synced 2024-11-21 22:30:51 +00:00
93cf68a780
- Changed "reset button" to a small round button, while the three control buttons keep their larger/rectangular shape. The reset button is barely needed. The round shape avoids confusion when operating the device. - Minor correction of the proportions of the outer shell - to match the real Disk II more closely. |
||
|---|---|---|
| .. | ||
| DiskII_BasePlate_Small.stl | ||
| DiskII_ButtonsBrackets_Small.stl | ||
| DiskII_FrontPanel_Small.stl | ||
| DiskII_RearPanel_Small.stl | ||
| DiskII_TopShell_Small.stl | ||
| README | ||
This folder contains the small sized variant of the FloppyEmu Disk II enclosure. It's 60% of the size of the original Disk II. It's just big enough to hold the FloppyEmu PCB. The front panel holds the FloppyEmu's orginal 1.7" LCD, a single 3mm LED (drive status) and the button panel. Hints for printing: * The models should be printed with their flat side facing downwards. * Preferably use white or light gray filament for the top shell, base plate, and for the rear panel. * Use black filament for the front panel and the buttons. * The models are optimized to reduce 3D "supports", however, the top shell and the front panel still need "supports" to be enabled when printing. * The buttons/brackets and base-plate print without "supports". * The infill setting doesn't matter (design does not contain any large filled volumes). * The design printed fine with an Ender 3v2 printer, sliced with Ultimaker Cura using stock settings. Printing Duration (estimates for an Ender 3v2): * Top shell: about 7 hours. * Front and rear panel: about 1:30 hours. * Buttons and mounting brackets: about 30 minutes.