{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1616186118624 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1616186118905 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1616186118905 ""}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" { } { } 0 171004 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "Fitter" 0 -1 1616186119514 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1616186119561 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Device EPM240T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1616186119999 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100A5 " "Device EPM240T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1616186119999 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Device EPM570T100C5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1616186119999 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Device EPM570T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1616186119999 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100A5 " "Device EPM570T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1616186119999 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1616186119999 ""}
{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "68 68 " "No exact pin location assignment(s) for 68 pins of 68 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "nRESout " "Pin nRESout not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { nRESout } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 27 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" "" { nRESout } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 179 9224 9983 0} } } } } 0 169086 "Pin %1!s! not assigned to an exact location on the device" 0 0 "Quartus II" 0 -1 1616186120014 ""} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "RAdir " "Pin RAdir not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { RAdir } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 53 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" "" { RAdir } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 311 9224 9983 0} } } } } 0 169086 "Pin %1!s! not assigned to an exact location on the device" 0 0 "Quartus II" 0 -1 1616186120014 ""} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "RDdir " "Pin RDdir not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { RDdir } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 88 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" "" { RDdir } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 312 9224 9983 0} } } } } 0 169086 "Pin %1!s! not assigned to an exact location on the device" 0 0 "Quartus II" 0 -1 1616186120014 ""} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "SBA\[0\] " "Pin SBA\[0\] not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { SBA[0] } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 342 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" "" { SBA[0] } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 158 9224 9983 0} } } } } 0 169086 "Pin %1!s! not assigned to an exact location on the device" 0 0 "Quartus II" 0 -1 1616186120014 ""} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "SBA\[1\] " "Pin SBA\[1\] not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { SBA[1] } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 342 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" "" { SBA[1] } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 159 9224 9983 0} } } } } 0 169086 "Pin %1!s! not assigned to an exact location on the device" 0 0 "Quartus II" 0 -1 1616186120014 ""} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "SA\[0\] " "Pin SA\[0\] not assigned to an exact location on the device" { } { { "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin/pin_planner.ppl" { SA[0] } } } { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 347 -1 0 } } { "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin/TimingClosureFloorplan.fl
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "GR8RAM.sdc " "Synopsys Design Constraints File file not found: 'GR8RAM.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1616186120233 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1616186120233 ""}
{ "Info" "ISTA_DEFAULT_TDC_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ISTA_ASSUMED_DEFAULT_TDC_REQUIREMENT" "" "Assuming a default timing requirement" { } { } 0 332127 "Assuming a default timing requirement" 0 0 "Quartus II" 0 -1 1616186120249 ""} } { } 0 332128 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0 "Fitter" 0 -1 1616186120249 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "C25M Global clock in PIN 14 " "Automatically promoted signal \"C25M\" to use Global clock in PIN 14" { } { { "gr8ram.v" "" { Text "Z:/Repos/GR8RAM/cpld/gr8ram.v" 9 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1616186120296 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1616186120296 ""}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" { } { } 0 186391 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0 "Fitter" 0 -1 1616186120358 ""}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Moving registers into LUTs to improve timing and density" { } { } 1 176244 "Moving registers into LUTs to improve timing and density" 1 0 "Fitter" 0 -1 1616186120358 ""}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "67 unused 3.3V 23 28 16 " "Number of I/O pins in group: 67 (unused VREF, 3.3V VCCIO, 23 input, 28 output, 16 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "I/O standards used: 3.3-V LVTTL." { } { } 0 176212 "I/O standards used: %1!s!" 0 0 "Quartus II" 0 -1 1616186120452 ""} } { } 0 176211 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "Quartus II" 0 -1 1616186120452 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Fitter" 0 -1 1616186120452 ""}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 1 37 " "I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used -- 37 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Quartus II" 0 -1 1616186120452 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 42 " "I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 42 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Quartus II" 0 -1 1616186120452 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Quartus II" 0 -1 1616186120452 ""} } { } 0 176215 "I/O bank details %1!s! I/O pin placement" 0 0 "Fitter" 0 -1 1616186120452 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1616186120514 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "19 " "Router estimated average interconnect usage is 19% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "19 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 19% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "Z:/Repos/GR8RAM/cpld/" { { 1 { 0 "Router estimated peak interconnect usage is 19% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 11 { 0 "Router estimated peak interconnect usage is 19% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Quartus II" 0 -1 1616186124296 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1616186124296 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1616186124843 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "0.52 " "Total time spent on timing analysis during the Fitter is 0.52 seconds." { } { } 0 11888 "Total time spent on timing analysis during the Fitter is %1!s! seconds." 0 0 "Fitter" 0 -1 1616186124889 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1616186124905 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1616186124936 ""}
