mirror of
https://github.com/garrettsworkshop/GR8RAM.git
synced 2024-12-11 16:49:17 +00:00
Update GR8RAM.qsf
This commit is contained in:
Zane Kaminski
parent
4ae69c54f3
commit
da9197740a
229
cpld2/GR8RAM.qsf
229
cpld2/GR8RAM.qsf
@ -1,25 +1,24 @@
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Copyright (C) 2022 Intel Corporation. All rights reserved.
|
||||
# Your use of Intel Corporation's design tools, logic functions
|
||||
# and other software and tools, and any partner logic
|
||||
# Copyright (C) 1991-2013 Altera Corporation
|
||||
# Your use of Altera Corporation's design tools, logic functions
|
||||
# and other software and tools, and its AMPP partner logic
|
||||
# functions, and any output files from any of the foregoing
|
||||
# (including device programming or simulation files), and any
|
||||
# associated documentation or information are expressly subject
|
||||
# to the terms and conditions of the Intel Program License
|
||||
# Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
# the Intel FPGA IP License Agreement, or other applicable license
|
||||
# agreement, including, without limitation, that your use is for
|
||||
# the sole purpose of programming logic devices manufactured by
|
||||
# Intel and sold by Intel or its authorized distributors. Please
|
||||
# refer to the applicable agreement for further details, at
|
||||
# https://fpgasoftware.intel.com/eula.
|
||||
# to the terms and conditions of the Altera Program License
|
||||
# Subscription Agreement, Altera MegaCore Function License
|
||||
# Agreement, or other applicable license agreement, including,
|
||||
# without limitation, that your use is for the sole purpose of
|
||||
# programming logic devices manufactured by Altera and sold by
|
||||
# Altera or its authorized distributors. Please refer to the
|
||||
# applicable agreement for further details.
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Quartus Prime
|
||||
# Version 22.1std.0 Build 915 10/25/2022 SC Lite Edition
|
||||
# Date created = 11:15:44 February 28, 2023
|
||||
# Quartus II 32-bit
|
||||
# Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
|
||||
# Date created = 13:41:40 March 15, 2021
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
@ -30,8 +29,8 @@
|
||||
# If this file doesn't exist, see file:
|
||||
# assignment_defaults.qdf
|
||||
#
|
||||
# 2) Intel recommends that you do not modify this file. This
|
||||
# file is updated automatically by the Quartus Prime software
|
||||
# 2) Altera recommends that you do not modify this file. This
|
||||
# file is updated automatically by the Quartus II software
|
||||
# and any changes you make may be lost or overwritten.
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
@ -58,4 +57,200 @@ set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "VERILOG HDL" -section_id eda
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_timing
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_symbol
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_signal_integrity
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scan
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scanset_location_assignment PIN_2 -to RA[5]
|
||||
set_location_assignment PIN_3 -to RA[6]
|
||||
set_location_assignment PIN_4 -to RA[3]
|
||||
set_location_assignment PIN_5 -to nFCS
|
||||
set_location_assignment PIN_6 -to RA[7]
|
||||
set_location_assignment PIN_7 -to RA[8]
|
||||
set_location_assignment PIN_8 -to RA[9]
|
||||
set_location_assignment PIN_12 -to FCK
|
||||
set_location_assignment PIN_14 -to RA[10]
|
||||
set_location_assignment PIN_15 -to MOSI
|
||||
set_location_assignment PIN_16 -to MISO
|
||||
set_location_assignment PIN_30 -to nRESout
|
||||
set_location_assignment PIN_34 -to RA[11]
|
||||
set_location_assignment PIN_35 -to RA[12]
|
||||
set_location_assignment PIN_36 -to RA[13]
|
||||
set_location_assignment PIN_37 -to RA[14]
|
||||
set_location_assignment PIN_38 -to RA[15]
|
||||
set_location_assignment PIN_39 -to nIOSEL
|
||||
set_location_assignment PIN_42 -to nIOSTRB
|
||||
set_location_assignment PIN_40 -to nDEVSEL
|
||||
set_location_assignment PIN_41 -to PHI0
|
||||
set_location_assignment PIN_43 -to nWE
|
||||
set_location_assignment PIN_44 -to nRES
|
||||
set_location_assignment PIN_47 -to SD[1]
|
||||
set_location_assignment PIN_50 -to SD[0]
|
||||
set_location_assignment PIN_51 -to SD[4]
|
||||
set_location_assignment PIN_100 -to RA[0]
|
||||
set_location_assignment PIN_99 -to RD[7]
|
||||
set_location_assignment PIN_52 -to SD[5]
|
||||
set_location_assignment PIN_54 -to SD[7]
|
||||
set_location_assignment PIN_55 -to SD[3]
|
||||
set_location_assignment PIN_56 -to SD[2]
|
||||
set_location_assignment PIN_53 -to SD[6]
|
||||
set_location_assignment PIN_57 -to DQMH
|
||||
set_location_assignment PIN_58 -to nSWE
|
||||
set_location_assignment PIN_62 -to nRAS
|
||||
set_location_assignment PIN_61 -to nCAS
|
||||
set_location_assignment PIN_64 -to C25M
|
||||
set_location_assignment PIN_66 -to RCKE
|
||||
set_location_assignment PIN_67 -to nRCS
|
||||
set_location_assignment PIN_68 -to SA[12]
|
||||
set_location_assignment PIN_69 -to SBA[0]
|
||||
set_location_assignment PIN_70 -to SA[11]
|
||||
set_location_assignment PIN_71 -to SBA[1]
|
||||
set_location_assignment PIN_72 -to SA[9]
|
||||
set_location_assignment PIN_73 -to SA[10]
|
||||
set_location_assignment PIN_74 -to SA[8]
|
||||
set_location_assignment PIN_75 -to SA[0]
|
||||
set_location_assignment PIN_76 -to SA[4]
|
||||
set_location_assignment PIN_77 -to SA[6]
|
||||
set_location_assignment PIN_78 -to SA[7]
|
||||
set_location_assignment PIN_81 -to SA[1]
|
||||
set_location_assignment PIN_82 -to SA[2]
|
||||
set_location_assignment PIN_83 -to SA[5]
|
||||
set_location_assignment PIN_84 -to SA[3]
|
||||
set_location_assignment PIN_85 -to DQML
|
||||
set_location_assignment PIN_86 -to RD[0]
|
||||
set_location_assignment PIN_87 -to RD[1]
|
||||
set_location_assignment PIN_88 -to RD[2]
|
||||
set_location_assignment PIN_89 -to RD[3]
|
||||
set_location_assignment PIN_90 -to RD[4]
|
||||
set_location_assignment PIN_91 -to RD[5]
|
||||
set_location_assignment PIN_92 -to RD[6]
|
||||
set_location_assignment PIN_97 -to RA[2]
|
||||
set_location_assignment PIN_98 -to RA[1]
|
||||
set_location_assignment PIN_96 -to SetFW[0]
|
||||
set_location_assignment PIN_95 -to SetFW[1]
|
||||
set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 1
|
||||
set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 2
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to nFCS
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nFCS
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to FCK
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to FCK
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to MOSI
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to MOSI
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to MISO
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to MISO
|
||||
set_location_assignment PIN_21 -to nDMAout
|
||||
set_location_assignment PIN_19 -to RAdir
|
||||
set_location_assignment PIN_20 -to INTout
|
||||
set_location_assignment PIN_26 -to nNMIout
|
||||
set_location_assignment PIN_27 -to nINHout
|
||||
set_location_assignment PIN_28 -to nRDYout
|
||||
set_location_assignment PIN_29 -to nIRQout
|
||||
set_location_assignment PIN_33 -to RWout
|
||||
set_location_assignment PIN_48 -to DMAin
|
||||
set_location_assignment PIN_49 -to INTin
|
||||
set_location_assignment PIN_17 -to RDdir
|
||||
set_location_assignment PIN_18 -to DMAout
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to RA
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RA
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RA
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to RD
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RD
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to RD
|
||||
set_instance_assignment -name SLOW_SLEW_RATE OFF -to RD
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RD
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to RAdir
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to RAdir
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RAdir
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to RAdir
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RAdir
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to RDdir
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to RDdir
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RDdir
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to RDdir
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RDdir
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to PHI0
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to PHI0
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to PHI0
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to nWE
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nWE
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nWE
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to nDEVSEL
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nDEVSEL
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nDEVSEL
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to nIOSEL
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nIOSEL
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nIOSEL
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to nIOSTRB
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nIOSTRB
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nIOSTRB
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to nRES
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRES
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRES
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nRESout
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to nRESout
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRESout
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRESout
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRESout
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nFCS
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nFCS
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nFCS
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to FCK
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to FCK
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to FCK
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to MOSI
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to MOSI
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MOSI
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to MISO
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to C25M
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to C25M
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to C25M
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nRCS
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRCS
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRCS
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRCS
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRCS
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nRAS
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRAS
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRAS
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRAS
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRAS
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nCAS
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nCAS
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nCAS
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nCAS
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nCAS
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to nSWE
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nSWE
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nSWE
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to nSWE
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nSWE
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to RCKE
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RCKE
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RCKE
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to RCKE
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RCKE
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SBA
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to SBA
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to SBA
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to SBA
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SBA
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SA
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to SA
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to SA
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to SA
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SA
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to DQMH
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to DQMH
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to DQMH
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to DQMH
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to DQMH
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to DQML
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to DQML
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to DQML
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to DQML
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to DQML
|
||||
set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SetFW
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SetFW
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to SetFW
|
||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SD
|
||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to SD
|
||||
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to SD
|
||||
set_instance_assignment -name SLOW_SLEW_RATE ON -to SD
|
||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to SD
|
||||
set_global_assignment -name SDC_FILE GR8RAM.sdc
|
||||
Loading…
Reference in New Issue
Block a user