# -------------------------------------------------------------------------- # # # Copyright (C) 2019 Intel Corporation. All rights reserved. # Your use of Intel Corporation's design tools, logic functions # and other software and tools, and any partner logic # functions, and any output files from any of the foregoing # (including device programming or simulation files), and any # associated documentation or information are expressly subject # to the terms and conditions of the Intel Program License # Subscription Agreement, the Intel Quartus Prime License Agreement, # the Intel FPGA IP License Agreement, or other applicable license # agreement, including, without limitation, that your use is for # the sole purpose of programming logic devices manufactured by # Intel and sold by Intel or its authorized distributors. Please # refer to the applicable agreement for further details, at # https://fpgasoftware.intel.com/eula. # # -------------------------------------------------------------------------- # # # Quartus Prime # Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition # Date created = 07:26:23 August 20, 2023 # # -------------------------------------------------------------------------- # # # Notes: # # 1) The default values for assignments are stored in the file: # RAM2E_assignment_defaults.qdf # If this file doesn't exist, see file: # assignment_defaults.qdf # # 2) Altera recommends that you do not modify this file. This # file is updated automatically by the Quartus Prime software # and any changes you make may be lost or overwritten. # # -------------------------------------------------------------------------- # set_global_assignment -name FAMILY "MAX II" set_global_assignment -name DEVICE EPM240T100C5 set_global_assignment -name TOP_LEVEL_ENTITY RAM2E set_global_assignment -name ORIGINAL_QUARTUS_VERSION 19.1.0 set_global_assignment -name PROJECT_CREATION_TIME_DATE "07:26:23 AUGUST 20, 2023" set_global_assignment -name LAST_QUARTUS_VERSION "19.1.0 SP0.02std Lite Edition" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0 set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85 set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP set_global_assignment -name DEVICE_FILTER_PIN_COUNT 100 set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 5 set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR "-1" set_global_assignment -name POWER_EXT_SUPPLY_VOLTAGE_TO_REGULATOR 3.3V set_global_assignment -name NUM_PARALLEL_PROCESSORS 4 set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS OUTPUT DRIVING GROUND" set_location_assignment PIN_12 -to C14M set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to C14M set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to C14M set_location_assignment PIN_37 -to PHI1 set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to PHI1 set_instance_assignment -name PAD_TO_CORE_DELAY 1 -to PHI1 set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to PHI1 set_location_assignment PIN_51 -to nWE set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nWE set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nWE set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nWE set_location_assignment PIN_28 -to nEN80 set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nEN80 set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nEN80 set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nEN80 set_location_assignment PIN_33 -to nWE80 set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nWE80 set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nWE80 set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nWE80 set_location_assignment PIN_52 -to nC07X set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nC07X set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nC07X set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nC07X set_location_assignment PIN_56 -to Ain[0] set_location_assignment PIN_54 -to Ain[1] set_location_assignment PIN_43 -to Ain[2] set_location_assignment PIN_47 -to Ain[3] set_location_assignment PIN_44 -to Ain[4] set_location_assignment PIN_34 -to Ain[5] set_location_assignment PIN_39 -to Ain[6] set_location_assignment PIN_53 -to Ain[7] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Ain set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to Ain set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to Ain set_location_assignment PIN_38 -to Din[0] set_location_assignment PIN_40 -to Din[1] set_location_assignment PIN_42 -to Din[2] set_location_assignment PIN_41 -to Din[3] set_location_assignment PIN_48 -to Din[4] set_location_assignment PIN_49 -to Din[5] set_location_assignment PIN_36 -to Din[6] set_location_assignment PIN_35 -to Din[7] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Din set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to Din set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to Din set_location_assignment PIN_55 -to nDOE set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nDOE set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nDOE set_instance_assignment -name SLOW_SLEW_RATE ON -to nDOE set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to nDOE set_location_assignment PIN_77 -to Dout[0] set_location_assignment PIN_76 -to Dout[1] set_location_assignment PIN_74 -to Dout[2] set_location_assignment PIN_75 -to Dout[3] set_location_assignment PIN_73 -to Dout[4] set_location_assignment PIN_72 -to Dout[5] set_location_assignment PIN_84 -to Dout[6] set_location_assignment PIN_85 -to Dout[7] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Dout set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to Dout set_instance_assignment -name SLOW_SLEW_RATE ON -to Dout set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to Dout set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to Dout set_location_assignment PIN_50 -to nVOE set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nVOE set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nVOE set_instance_assignment -name SLOW_SLEW_RATE ON -to nVOE set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to nVOE set_location_assignment PIN_70 -to Vout[0] set_location_assignment PIN_67 -to Vout[1] set_location_assignment PIN_69 -to Vout[2] set_location_assignment PIN_62 -to Vout[3] set_location_assignment PIN_71 -to Vout[4] set_location_assignment PIN_68 -to Vout[5] set_location_assignment PIN_58 -to Vout[6] set_location_assignment PIN_57 -to Vout[7] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Vout set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to Vout set_instance_assignment -name SLOW_SLEW_RATE ON -to Vout set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to Vout set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to Vout set_location_assignment PIN_4 -to CKE set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to CKE set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to CKE set_instance_assignment -name SLOW_SLEW_RATE ON -to CKE set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to CKE set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to CKE set_location_assignment PIN_8 -to nCS set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nCS set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nCS set_instance_assignment -name SLOW_SLEW_RATE ON -to nCS set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nCS set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nCS set_location_assignment PIN_2 -to nRWE set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRWE set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRWE set_instance_assignment -name SLOW_SLEW_RATE ON -to nRWE set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRWE set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRWE set_location_assignment PIN_5 -to nRAS set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRAS set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRAS set_instance_assignment -name SLOW_SLEW_RATE ON -to nRAS set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRAS set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRAS set_location_assignment PIN_3 -to nCAS set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nCAS set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nCAS set_instance_assignment -name SLOW_SLEW_RATE ON -to nCAS set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nCAS set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nCAS set_location_assignment PIN_6 -to BA[0] set_location_assignment PIN_14 -to BA[1] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to BA set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to BA set_instance_assignment -name SLOW_SLEW_RATE ON -to BA set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to BA set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to BA set_location_assignment PIN_18 -to RA[0] set_location_assignment PIN_20 -to RA[1] set_location_assignment PIN_30 -to RA[2] set_location_assignment PIN_27 -to RA[3] set_location_assignment PIN_26 -to RA[4] set_location_assignment PIN_29 -to RA[5] set_location_assignment PIN_21 -to RA[6] set_location_assignment PIN_19 -to RA[7] set_location_assignment PIN_17 -to RA[8] set_location_assignment PIN_15 -to RA[9] set_location_assignment PIN_16 -to RA[10] set_location_assignment PIN_7 -to RA[11] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RA set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RA set_instance_assignment -name SLOW_SLEW_RATE ON -to RA set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to RA set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RA set_location_assignment PIN_100 -to DQMH set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to DQMH set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to DQMH set_instance_assignment -name SLOW_SLEW_RATE ON -to DQMH set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to DQMH set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to DQMH set_location_assignment PIN_98 -to DQML set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to DQML set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to DQML set_instance_assignment -name SLOW_SLEW_RATE ON -to DQML set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to DQML set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to DQML set_location_assignment PIN_97 -to RD[0] set_location_assignment PIN_90 -to RD[1] set_location_assignment PIN_99 -to RD[2] set_location_assignment PIN_89 -to RD[3] set_location_assignment PIN_91 -to RD[4] set_location_assignment PIN_92 -to RD[5] set_location_assignment PIN_95 -to RD[6] set_location_assignment PIN_96 -to RD[7] set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RD set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RD set_instance_assignment -name SLOW_SLEW_RATE ON -to RD set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to RD set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to RD set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RD set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "NO HEAT SINK WITH STILL AIR" set_global_assignment -name VERILOG_FILE "../RAM2E-MAX.v" set_global_assignment -name QIP_FILE UFM.qip set_global_assignment -name MIF_FILE ../RAM2E-MAX.mif set_global_assignment -name SDC_FILE ../RAM2E.sdc set_global_assignment -name SDC_FILE "../RAM2E-MAX.sdc" set_location_assignment PIN_88 -to LED set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to LED set_instance_assignment -name SLOW_SLEW_RATE ON -to LED set_location_assignment PIN_81 -to RCLK set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RCLK set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to RCLK set_instance_assignment -name SLOW_SLEW_RATE OFF -to RCLK set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RCLK set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RCLK