RAM2GS/CPLD/LCMXO256C/impl1/RAM2GS_LCMXO256C_impl1.tw1

Loading design for application trce from file ram2gs_lcmxo256c_impl1_map.ncd.
Design name: RAM2GS
NCD version: 3.3
Vendor:      LATTICE
Device:      LCMXO256C
Package:     TQFP100
Performance: 3
Loading device for application trce from file 'mj5g10x6.nph' in environment: C:/lscc/diamond/3.12/ispfpga.
Package Status:                     Final          Version 1.19.
Performance Hardware Data Status: Version 1.124.
Setup and Hold Report

--------------------------------------------------------------------------------
Lattice TRACE Report - Setup, Version Diamond (64-bit) 3.12.1.454
Sat Jan 06 06:24:59 2024

Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp.   All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc.  All rights reserved.
Copyright (c) 2001 Agere Systems   All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation,  All rights reserved.

Report Information
------------------
Command line:    trce -v 1 -gt -mapchkpnt 0 -sethld -o RAM2GS_LCMXO256C_impl1.tw1 -gui -msgset //Mac/iCloud/Repos/RAM2GS/CPLD/LCMXO256C/promote.xml RAM2GS_LCMXO256C_impl1_map.ncd RAM2GS_LCMXO256C_impl1.prf 
Design file:     ram2gs_lcmxo256c_impl1_map.ncd
Preference file: ram2gs_lcmxo256c_impl1.prf
Device,speed:    LCMXO256C,3
Report level:    verbose report, limited to 1 item per preference
--------------------------------------------------------------------------------

BLOCK ASYNCPATHS
BLOCK RESETPATHS
--------------------------------------------------------------------------------



================================================================================
Preference: FREQUENCY PORT "PHI2" 2.900000 MHz ;
            168 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed: The following path meets requirements by 160.807ns (weighted slack = 321.614ns)

 Logical Details:  Cell type  Pin type       Cell/ASIC name  (clock net +/-)

   Source:         FF         Q              Bank[6]  (from PHI2_c +)
   Destination:    FF         Data in        CmdEnable  (to PHI2_c -)

   Delay:              11.433ns  (24.4% logic, 75.6% route), 7 logic levels.

 Constraint Details:

     11.433ns physical path delay SLICE_75 to SLICE_20 meets
    172.414ns delay constraint less
      0.174ns DIN_SET requirement (totaling 172.240ns) by 160.807ns

 Physical Path Details:

      Data path SLICE_75 to SLICE_20:

   Name    Fanout   Delay (ns)          Site               Resource
REG_DEL     ---     0.560   SLICE_75.CLK to    SLICE_75.Q0 SLICE_75 (from PHI2_c)
ROUTE         1   e 1.441    SLICE_75.Q0 to    SLICE_77.C1 Bank[6]
CTOF_DEL    ---     0.371    SLICE_77.C1 to    SLICE_77.F1 SLICE_77
ROUTE         2   e 1.441    SLICE_77.F1 to    SLICE_79.D0 un1_Bank_1_5
CTOF_DEL    ---     0.371    SLICE_79.D0 to    SLICE_79.F0 SLICE_79
ROUTE         2   e 1.441    SLICE_79.F0 to    SLICE_76.B0 C1WR_7
CTOF_DEL    ---     0.371    SLICE_76.B0 to    SLICE_76.F0 SLICE_76
ROUTE         5   e 1.441    SLICE_76.F0 to    SLICE_70.B0 C1WR
CTOF_DEL    ---     0.371    SLICE_70.B0 to    SLICE_70.F0 SLICE_70
ROUTE         1   e 1.441    SLICE_70.F0 to    SLICE_14.C1 N_121
CTOF_DEL    ---     0.371    SLICE_14.C1 to    SLICE_14.F1 SLICE_14
ROUTE         1   e 1.441    SLICE_14.F1 to    SLICE_20.C0 un1_CmdEnable20_i
CTOF_DEL    ---     0.371    SLICE_20.C0 to    SLICE_20.F0 SLICE_20
ROUTE         1   e 0.001    SLICE_20.F0 to   SLICE_20.DI0 CmdEnable_s (to PHI2_c)
                  --------
                   11.433   (24.4% logic, 75.6% route), 7 logic levels.

Report:   43.077MHz is the maximum frequency for this preference.


================================================================================
Preference: FREQUENCY PORT "nCCAS" 2.900000 MHz ;
            0 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed:  The following path meets requirements by 342.328ns
         The internal maximum frequency of the following component is 400.000 MHz

 Logical Details:  Cell type  Pin name       Component name

   Destination:    PIO        PAD            nCCAS

   Delay:               2.500ns -- based on Minimum Pulse Width

Report:  400.000MHz is the maximum frequency for this preference.


================================================================================
Preference: FREQUENCY PORT "nCRAS" 2.900000 MHz ;
            0 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed:  The following path meets requirements by 342.328ns
         The internal maximum frequency of the following component is 400.000 MHz

 Logical Details:  Cell type  Pin name       Component name

   Destination:    PIO        PAD            nCRAS

   Delay:               2.500ns -- based on Minimum Pulse Width

Report:  400.000MHz is the maximum frequency for this preference.


================================================================================
Preference: FREQUENCY PORT "RCLK" 62.500000 MHz ;
            392 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed: The following path meets requirements by 6.198ns

 Logical Details:  Cell type  Pin type       Cell/ASIC name  (clock net +/-)

   Source:         FF         Q              FS[17]  (from RCLK_c +)
   Destination:    FF         Data in        UFMSDI  (to RCLK_c +)

   Delay:               9.621ns  (25.1% logic, 74.9% route), 6 logic levels.

 Constraint Details:

      9.621ns physical path delay SLICE_1 to SLICE_52 meets
     16.000ns delay constraint less
      0.181ns DIN_SET requirement (totaling 15.819ns) by 6.198ns

 Physical Path Details:

      Data path SLICE_1 to SLICE_52:

   Name    Fanout   Delay (ns)          Site               Resource
REG_DEL     ---     0.560    SLICE_1.CLK to     SLICE_1.Q1 SLICE_1 (from RCLK_c)
ROUTE         3   e 1.441     SLICE_1.Q1 to    SLICE_86.D1 FS[17]
CTOF_DEL    ---     0.371    SLICE_86.D1 to    SLICE_86.F1 SLICE_86
ROUTE         1   e 1.441    SLICE_86.F1 to    SLICE_69.C1 UFMSDI_ens2_i_o2_0_3
CTOF_DEL    ---     0.371    SLICE_69.C1 to    SLICE_69.F1 SLICE_69
ROUTE         4   e 1.441    SLICE_69.F1 to    SLICE_58.C1 N_128
CTOF_DEL    ---     0.371    SLICE_58.C1 to    SLICE_58.F1 SLICE_58
ROUTE         3   e 1.441    SLICE_58.F1 to    SLICE_55.C0 N_94
CTOF_DEL    ---     0.371    SLICE_55.C0 to    SLICE_55.F0 SLICE_55
ROUTE         1   e 1.441    SLICE_55.F0 to    SLICE_52.D0 UFMSDI_r_xx_mm_1
CTOF_DEL    ---     0.371    SLICE_52.D0 to    SLICE_52.F0 SLICE_52
ROUTE         1   e 0.001    SLICE_52.F0 to   SLICE_52.DI0 UFMSDI_RNO (to RCLK_c)
                  --------
                    9.621   (25.1% logic, 74.9% route), 6 logic levels.

Report:  102.020MHz is the maximum frequency for this preference.

Report Summary
--------------
----------------------------------------------------------------------------
Preference                              |   Constraint|       Actual|Levels
----------------------------------------------------------------------------
                                        |             |             |
FREQUENCY PORT "PHI2" 2.900000 MHz ;    |    2.900 MHz|   43.077 MHz|   7  
                                        |             |             |
FREQUENCY PORT "nCCAS" 2.900000 MHz ;   |    2.900 MHz|  400.000 MHz|   0  
                                        |             |             |
FREQUENCY PORT "nCRAS" 2.900000 MHz ;   |    2.900 MHz|  400.000 MHz|   0  
                                        |             |             |
FREQUENCY PORT "RCLK" 62.500000 MHz ;   |   62.500 MHz|  102.020 MHz|   6  
                                        |             |             |
----------------------------------------------------------------------------


All preferences were met.


Clock Domains Analysis
------------------------

Found 4 clocks:

Clock Domain: nCRAS_c   Source: nCRAS.PAD   Loads: 10
   No transfer within this clock domain is found

   Data transfers from:
   Clock Domain: RCLK_c   Source: RCLK.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

Clock Domain: nCCAS_c   Source: nCCAS.PAD   Loads: 8
   No transfer within this clock domain is found

Clock Domain: RCLK_c   Source: RCLK.PAD   Loads: 32
   Covered under: FREQUENCY PORT "RCLK" 62.500000 MHz ;

   Data transfers from:
   Clock Domain: nCRAS_c   Source: nCRAS.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

   Clock Domain: PHI2_c   Source: PHI2.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

Clock Domain: PHI2_c   Source: PHI2.PAD   Loads: 15
   Covered under: FREQUENCY PORT "PHI2" 2.900000 MHz ;

   Data transfers from:
   Clock Domain: RCLK_c   Source: RCLK.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.


Timing summary (Setup):
---------------

Timing errors: 0  Score: 0
Cumulative negative slack: 0

Constraints cover 560 paths, 4 nets, and 424 connections (62.26% coverage)

--------------------------------------------------------------------------------
Lattice TRACE Report - Hold, Version Diamond (64-bit) 3.12.1.454
Sat Jan 06 06:24:59 2024

Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp.   All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc.  All rights reserved.
Copyright (c) 2001 Agere Systems   All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation,  All rights reserved.

Report Information
------------------
Command line:    trce -v 1 -gt -mapchkpnt 0 -sethld -o RAM2GS_LCMXO256C_impl1.tw1 -gui -msgset //Mac/iCloud/Repos/RAM2GS/CPLD/LCMXO256C/promote.xml RAM2GS_LCMXO256C_impl1_map.ncd RAM2GS_LCMXO256C_impl1.prf 
Design file:     ram2gs_lcmxo256c_impl1_map.ncd
Preference file: ram2gs_lcmxo256c_impl1.prf
Device,speed:    LCMXO256C,M
Report level:    verbose report, limited to 1 item per preference
--------------------------------------------------------------------------------

BLOCK ASYNCPATHS
BLOCK RESETPATHS
--------------------------------------------------------------------------------



================================================================================
Preference: FREQUENCY PORT "PHI2" 2.900000 MHz ;
            168 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed: The following path meets requirements by 0.430ns

 Logical Details:  Cell type  Pin type       Cell/ASIC name  (clock net +/-)

   Source:         FF         Q              C1Submitted  (from PHI2_c -)
   Destination:    FF         Data in        C1Submitted  (to PHI2_c -)

   Delay:               0.411ns  (51.3% logic, 48.7% route), 2 logic levels.

 Constraint Details:

      0.411ns physical path delay SLICE_14 to SLICE_14 meets
     -0.019ns DIN_HLD and
      0.000ns delay constraint requirement (totaling -0.019ns) by 0.430ns

 Physical Path Details:

      Data path SLICE_14 to SLICE_14:

   Name    Fanout   Delay (ns)          Site               Resource
REG_DEL     ---     0.137   SLICE_14.CLK to    SLICE_14.Q0 SLICE_14 (from PHI2_c)
ROUTE         2   e 0.199    SLICE_14.Q0 to    SLICE_14.B0 C1Submitted
CTOF_DEL    ---     0.074    SLICE_14.B0 to    SLICE_14.F0 SLICE_14
ROUTE         1   e 0.001    SLICE_14.F0 to   SLICE_14.DI0 C1Submitted_RNO (to PHI2_c)
                  --------
                    0.411   (51.3% logic, 48.7% route), 2 logic levels.


================================================================================
Preference: FREQUENCY PORT "nCCAS" 2.900000 MHz ;
            0 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


================================================================================
Preference: FREQUENCY PORT "nCRAS" 2.900000 MHz ;
            0 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


================================================================================
Preference: FREQUENCY PORT "RCLK" 62.500000 MHz ;
            392 items scored, 0 timing errors detected.
--------------------------------------------------------------------------------


Passed: The following path meets requirements by 0.342ns

 Logical Details:  Cell type  Pin type       Cell/ASIC name  (clock net +/-)

   Source:         FF         Q              CASr  (from RCLK_c +)
   Destination:    FF         Data in        CASr2  (to RCLK_c +)

   Delay:               0.325ns  (38.8% logic, 61.2% route), 1 logic levels.

 Constraint Details:

      0.325ns physical path delay SLICE_74 to SLICE_74 meets
     -0.017ns M_HLD and
      0.000ns delay constraint requirement (totaling -0.017ns) by 0.342ns

 Physical Path Details:

      Data path SLICE_74 to SLICE_74:

   Name    Fanout   Delay (ns)          Site               Resource
REG_DEL     ---     0.126   SLICE_74.CLK to    SLICE_74.Q0 SLICE_74 (from RCLK_c)
ROUTE         1   e 0.199    SLICE_74.Q0 to    SLICE_74.M1 CASr (to RCLK_c)
                  --------
                    0.325   (38.8% logic, 61.2% route), 1 logic levels.

Report Summary
--------------
----------------------------------------------------------------------------
Preference(MIN Delays)                  |   Constraint|       Actual|Levels
----------------------------------------------------------------------------
                                        |             |             |
FREQUENCY PORT "PHI2" 2.900000 MHz ;    |            -|            -|   2  
                                        |             |             |
FREQUENCY PORT "nCCAS" 2.900000 MHz ;   |            -|            -|   0  
                                        |             |             |
FREQUENCY PORT "nCRAS" 2.900000 MHz ;   |            -|            -|   0  
                                        |             |             |
FREQUENCY PORT "RCLK" 62.500000 MHz ;   |            -|            -|   1  
                                        |             |             |
----------------------------------------------------------------------------


All preferences were met.


Clock Domains Analysis
------------------------

Found 4 clocks:

Clock Domain: nCRAS_c   Source: nCRAS.PAD   Loads: 10
   No transfer within this clock domain is found

   Data transfers from:
   Clock Domain: RCLK_c   Source: RCLK.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

Clock Domain: nCCAS_c   Source: nCCAS.PAD   Loads: 8
   No transfer within this clock domain is found

Clock Domain: RCLK_c   Source: RCLK.PAD   Loads: 32
   Covered under: FREQUENCY PORT "RCLK" 62.500000 MHz ;

   Data transfers from:
   Clock Domain: nCRAS_c   Source: nCRAS.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

   Clock Domain: PHI2_c   Source: PHI2.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.

Clock Domain: PHI2_c   Source: PHI2.PAD   Loads: 15
   Covered under: FREQUENCY PORT "PHI2" 2.900000 MHz ;

   Data transfers from:
   Clock Domain: RCLK_c   Source: RCLK.PAD
      Not reported because source and destination domains are unrelated.
      To report these transfers please refer to preference CLKSKEWDIFF to define
      external clock skew between clock ports.


Timing summary (Hold):
---------------

Timing errors: 0  Score: 0
Cumulative negative slack: 0

Constraints cover 560 paths, 4 nets, and 424 connections (62.26% coverage)



Timing summary (Setup and Hold):
---------------

Timing errors: 0 (setup), 0 (hold)
Score: 0 (setup), 0 (hold)
Cumulative negative slack: 0 (0+0)
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------