{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1691915089467 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1691915089467 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "RAM2GS-MAX.v(59) " "Verilog HDL warning at RAM2GS-MAX.v(59): extended using \"x\" or \"z\"" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 59 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1691915097582 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1691915099379 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1691915099379 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1691915099426 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1691915099426 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1691915099441 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1691915099457 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "5M80ZT100C4 " "Device 5M80ZT100C4 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1691915099551 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "5M160ZT100C4 " "Device 5M160ZT100C4 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1691915099551 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "5M570ZT100C4 " "Device 5M570ZT100C4 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1691915099551 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1691915099551 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "RAM2GS.sdc " "Synopsys Design Constraints File file not found: 'RAM2GS.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1691915099598 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1691915099598 ""}
{ "Info" "ISTA_DEFAULT_TDC_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ISTA_ASSUMED_DEFAULT_TDC_REQUIREMENT" "" "Assuming a default timing requirement" { } { } 0 332127 "Assuming a default timing requirement" 0 0 "Design Software" 0 -1 1691915099598 ""} } { } 0 332128 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0 "Fitter" 0 -1 1691915099598 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "RCLK Global clock in PIN 12 " "Automatically promoted signal \"RCLK\" to use Global clock in PIN 12" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 40 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "PHI2 Global clock " "Automatically promoted some destinations of signal \"PHI2\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "PHI2r " "Destination \"PHI2r\" may be non-global or may not use global clock" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 13 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 7 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "PHI2 " "Pin \"PHI2\" drives global clock, but is not placed in a dedicated clock pin position" { } { { "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" { PHI2 } } } { "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" "" { Assignment "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" 1 { { 0 "PHI2" } } } } { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 7 -1 0 } } { "temporary_test_loc" "" { Generic "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/MAXV/" { { 0 { 0 ""} 0 336 14177 15141 0 0 "" 0 "" "" } } } } } 0 186228 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "nCRAS Global clock " "Automatically promoted some destinations of signal \"nCRAS\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "LED~0 " "Destination \"LED~0\" may be non-global or may not use global clock" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 21 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "RASr " "Destination \"RASr\" may be non-global or may not use global clock" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 14 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 10 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "nCRAS " "Pin \"nCRAS\" drives global clock, but is not placed in a dedicated clock pin position" { } { { "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" { nCRAS } } } { "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" "" { Assignment "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" 1 { { 0 "nCRAS" } } } } { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 10 -1 0 } } { "temporary_test_loc" "" { Generic "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/MAXV/" { { 0 { 0 ""} 0 338 14177 15141 0 0 "" 0 "" "" } } } } } 0 186228 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "nCCAS Global clock " "Automatically promoted some destinations of signal \"nCCAS\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "CBR " "Destination \"CBR\" may be non-global or may not use global clock" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 17 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "comb~0 " "Destination \"comb~0\" may be non-global or may not use global clock" { } { } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "CASr " "Destination \"CASr\" may be non-global or may not use global clock" { } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 15 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1691915099613 ""} } { { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 10 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "nCCAS " "Pin \"nCCAS\" drives global clock, but is not placed in a dedicated clock pin position" { } { { "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" { nCCAS } } } { "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" "" { Assignment "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" 1 { { 0 "nCCAS" } } } } { "../RAM2GS-MAX.v" "" { Text "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/RAM2GS-MAX.v" 10 -1 0 } } { "temporary_test_loc" "" { Generic "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/MAXV/" { { 0 { 0 ""} 0 337 14177 15141 0 0 "" 0 "" "" } } } } } 0 186228 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1691915099613 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1691915099676 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1691915099676 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "20 " "Router estimated average interconnect usage is 20% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "20 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 20% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/MAXV/" { { 1 { 0 "Router estimated peak interconnect usage is 20% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 12 { 0 ""} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1691915100348 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1691915100348 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1691915100488 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1691915100488 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1691915100504 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.23 " "Total time spent on timing analysis during the Fitter is 0.23 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1691915100504 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1691915100504 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1691915100535 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1691915101879 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1691915101894 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1691915103379 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1691915103379 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1691915103410 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1691915103410 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "RAM2GS.sdc " "Synopsys Design Constraints File file not found: 'RAM2GS.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1691915103660 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1691915103660 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1691915103676 ""}
{ "Info" "ISTA_METASTABILITY_REPORT_DISABLED" "" "The selected device family is not supported by the report_metastability command." { } { } 0 332001 "The selected device family is not supported by the report_metastability command." 0 0 "Timing Analyzer" 0 -1 1691915103754 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1691915103785 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1691915103785 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 3 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "4676 " "Peak virtual memory: 4676 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1691915103832 ""} { "Info" "IQEXE_END_BANNER_TIME" "Sun Aug 13 04:25:03 2023 " "Processing ended: Sun Aug 13 04:25:03 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1691915103832 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1691915103832 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1691915103832 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1691915103832 ""}
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 20 s " "Quartus Prime Full Compilation was successful. 0 errors, 20 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1691915104519 ""}