RAM2GS/CPLD/MAXV/RAM2GS.qsf

# -------------------------------------------------------------------------- #
#
# Copyright (C) 2019  Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions 
# and other software and tools, and any partner logic 
# functions, and any output files from any of the foregoing 
# (including device programming or simulation files), and any 
# associated documentation or information are expressly subject 
# to the terms and conditions of the Intel Program License 
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors.  Please
# refer to the applicable agreement for further details, at
# https://fpgasoftware.intel.com/eula.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
# Date created = 18:28:29  August 12, 2023
#
# -------------------------------------------------------------------------- #
#
# Notes:
#
# 1) The default values for assignments are stored in the file:
#		RAM2GS_assignment_defaults.qdf
#    If this file doesn't exist, see file:
#		assignment_defaults.qdf
#
# 2) Altera recommends that you do not modify this file. This
#    file is updated automatically by the Quartus Prime software
#    and any changes you make may be lost or overwritten.
#
# -------------------------------------------------------------------------- #


set_global_assignment -name FAMILY "MAX V"
set_global_assignment -name DEVICE 5M240ZT100C5
set_global_assignment -name TOP_LEVEL_ENTITY RAM2GS
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 19.1.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "18:28:29  AUGUST 12, 2023"
set_global_assignment -name LAST_QUARTUS_VERSION "19.1.0 Lite Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 100
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 5
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR "-1"
set_global_assignment -name POWER_EXT_SUPPLY_VOLTAGE_TO_REGULATOR 1.8V
set_global_assignment -name NUM_PARALLEL_PROCESSORS 4
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "NO HEAT SINK WITH STILL AIR"
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS OUTPUT DRIVING GROUND"


set_location_assignment PIN_12 -to RCLK

set_location_assignment PIN_52 -to PHI2

set_location_assignment PIN_67 -to nCRAS

set_location_assignment PIN_53 -to nCCAS

set_location_assignment PIN_48 -to nFWE

set_location_assignment PIN_49 -to MAin[0]
set_location_assignment PIN_51 -to MAin[1]
set_location_assignment PIN_50 -to MAin[2]
set_location_assignment PIN_71 -to MAin[3]
set_location_assignment PIN_70 -to MAin[4]
set_location_assignment PIN_69 -to MAin[5]
set_location_assignment PIN_72 -to MAin[6]
set_location_assignment PIN_68 -to MAin[7]
set_location_assignment PIN_73 -to MAin[8]
set_location_assignment PIN_74 -to MAin[9]

set_location_assignment PIN_54 -to CROW[0]
set_location_assignment PIN_55 -to CROW[1]

set_location_assignment PIN_35 -to Din[2]
set_location_assignment PIN_36 -to Din[1]
set_location_assignment PIN_37 -to Din[3]
set_location_assignment PIN_38 -to Din[5]
set_location_assignment PIN_39 -to Din[4]
set_location_assignment PIN_40 -to Din[7]
set_location_assignment PIN_41 -to Din[6]
set_location_assignment PIN_42 -to Din[0]

set_location_assignment PIN_33 -to Dout[0]
set_location_assignment PIN_57 -to Dout[1]
set_location_assignment PIN_56 -to Dout[2]
set_location_assignment PIN_47 -to Dout[3]
set_location_assignment PIN_44 -to Dout[4]
set_location_assignment PIN_28 -to Dout[5]
set_location_assignment PIN_34 -to Dout[6]
set_location_assignment PIN_43 -to Dout[7]

set_location_assignment PIN_8 -to RCKE

set_location_assignment PIN_3 -to nRCS

set_location_assignment PIN_100 -to nRWE

set_location_assignment PIN_6 -to nRRAS

set_location_assignment PIN_4 -to nRCAS

set_location_assignment PIN_5 -to RBA[0]
set_location_assignment PIN_14 -to RBA[1]

set_location_assignment PIN_18 -to RA[0]
set_location_assignment PIN_20 -to RA[1]
set_location_assignment PIN_30 -to RA[2]
set_location_assignment PIN_27 -to RA[3]
set_location_assignment PIN_26 -to RA[4]
set_location_assignment PIN_29 -to RA[5]
set_location_assignment PIN_21 -to RA[6]
set_location_assignment PIN_19 -to RA[7]
set_location_assignment PIN_17 -to RA[8]
set_location_assignment PIN_15 -to RA[9]
set_location_assignment PIN_16 -to RA[10]
set_location_assignment PIN_7 -to RA[11]

set_location_assignment PIN_2 -to RDQMH

set_location_assignment PIN_98 -to RDQML

set_location_assignment PIN_96 -to RD[0]
set_location_assignment PIN_90 -to RD[1]
set_location_assignment PIN_89 -to RD[2]
set_location_assignment PIN_99 -to RD[3]
set_location_assignment PIN_92 -to RD[4]
set_location_assignment PIN_91 -to RD[5]
set_location_assignment PIN_95 -to RD[6]
set_location_assignment PIN_97 -to RD[7]

set_location_assignment PIN_88 -to LED

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RCLK

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to PHI2

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to CROW
set_instance_assignment -name PAD_TO_CORE_DELAY 1 -to CROW

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nCRAS
set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nCRAS

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nCCAS
set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to nCCAS

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Din
set_instance_assignment -name PAD_TO_CORE_DELAY 1 -to Din

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MAin
set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to MAin

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nFWE
set_instance_assignment -name PAD_TO_CORE_DELAY 1 -to nFWE

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to Dout
set_instance_assignment -name SLOW_SLEW_RATE OFF -to Dout
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to Dout
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to Dout
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to Dout

set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED
set_instance_assignment -name SLOW_SLEW_RATE ON -to LED
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to LED
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to LED
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to LED

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RA
set_instance_assignment -name SLOW_SLEW_RATE ON -to RA
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RA
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RA
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RA

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RBA
set_instance_assignment -name SLOW_SLEW_RATE ON -to RBA
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RBA
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RBA
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RBA
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to RBA

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRCS
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRCS
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRCS
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRCS
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRCS
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRCS

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RCKE
set_instance_assignment -name SLOW_SLEW_RATE ON -to RCKE
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RCKE
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RCKE
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RCKE
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to RCKE

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRRAS
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRRAS
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRRAS
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRRAS
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRRAS
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRRAS

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRCAS
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRCAS
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRCAS
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRCAS
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRCAS
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRCAS

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to nRWE
set_instance_assignment -name SLOW_SLEW_RATE ON -to nRWE
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to nRWE
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to nRWE
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to nRWE
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to nRWE

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RDQMH
set_instance_assignment -name SLOW_SLEW_RATE ON -to RDQMH
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RDQMH
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RDQMH
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RDQMH

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RDQML
set_instance_assignment -name SLOW_SLEW_RATE ON -to RDQML
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RDQML
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY OFF -to RDQML
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RDQML

set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to RD
set_instance_assignment -name SLOW_SLEW_RATE ON -to RD
set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to RD
set_instance_assignment -name ENABLE_BUS_HOLD_CIRCUITRY ON -to RD
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to RD
set_instance_assignment -name PAD_TO_CORE_DELAY 0 -to RD

set_global_assignment -name SDC_FILE ../RAM2GS.sdc
set_global_assignment -name VERILOG_FILE "../RAM2GS-MAX.v"
set_global_assignment -name QIP_FILE UFM.qip
set_global_assignment -name MIF_FILE ../RAM2GS.mif
set_global_assignment -name SDC_FILE "../RAM2GS-MAX.sdc"