// Verilog netlist produced by program ldbanno, Version Diamond (64-bit) 3.12.1.454 // ldbanno -n Verilog -o RAM2GS_LCMXO256C_impl1_vo.vo -w -neg -gui -msgset D:/OneDrive/Documents/GitHub/RAM2GS/CPLD/LCMXO256C/promote.xml RAM2GS_LCMXO256C_impl1.ncd // Netlist created on Wed Aug 16 04:50:39 2023 // Netlist written on Wed Aug 16 04:50:49 2023 // Design is for device LCMXO256C // Design is for package TQFP100 // Design is for performance grade 3 `timescale 1 ns / 1 ps module RAM2GS ( PHI2, MAin, CROW, Din, Dout, nCCAS, nCRAS, nFWE, LED, RBA, RA, RD, nRCS, RCLK, RCKE, nRWE, nRRAS, nRCAS, RDQMH, RDQML, nUFMCS, UFMCLK, UFMSDI, UFMSDO ); input PHI2; input [9:0] MAin; input [1:0] CROW; input [7:0] Din; input nCCAS, nCRAS, nFWE, RCLK, UFMSDO; output [7:0] Dout; output LED; output [1:0] RBA; output [11:0] RA; output nRCS, RCKE, nRWE, nRRAS, nRCAS, RDQMH, RDQML, nUFMCS, UFMCLK, UFMSDI; inout [7:0] RD; wire \FS[1] , \FS[0] , RCLK_c, \FS_cry[1] , \FS[17] , \FS[16] , \FS_cry[15] , \FS[15] , \FS[14] , \FS_cry[13] , \FS[13] , \FS[12] , \FS_cry[11] , \FS[11] , \FS[10] , \FS_cry[9] , \FS[9] , \FS[8] , \FS_cry[7] , \FS[7] , \FS[6] , \FS_cry[5] , \FS[5] , \FS[4] , \FS_cry[3] , \FS[3] , \FS[2] , CmdEnable17_0_a2_4, CmdEnable17_0_a2_3, \MAin_c[0] , N_147, ADSubmitted, CmdEnable17, CmdEnable16, C1WR_0_a2, ADSubmitted_r, PHI2_c, CmdEnable16_0_a2_5, CmdEnable16_0_a2_4, \MAin_c[1] , C1Submitted, C1Submitted_RNO, RASr2, \S[1] , CO0, \IS[3] , N_177_i, Ready_0_sqmuxa_0_a3_2, CmdEnable, un1_CMDWR, CmdEnable_s, N_128, \Din_c[5] , \Din_c[3] , N_133, N_152, N_132, LEDEN, N_21_i, XOR8MEG18, CmdLEDEN, CmdSubmitted, InitReady, PHI2r3, PHI2r2, CmdSubmitted_1_sqmuxa, N_460_0, N_136, N_43, Cmdn8MEGEN, CmdEnable16_4, n8MEGEN, Cmdn8MEGEN_4_u_i_0, N_19_i, nRRAS_5_u_i_0, \IS[0] , N_160, N_155, Ready, N_64_i_i, N_24, \IS[1] , \IS[2] , N_60_i_i, N_56_i, N_159_i, N_159, N_61_i_i, RA10s_i, N_126, N_51, UFMSDI_ens2_i_a2_4_2, InitReady3, N_461_0, UFMSDI_ens2_i_a0, nCRAS_c, CBR, UFMSDO_c, N_70, N_33, LED_c, un1_Din_4, XOR8MEG, \Din_c[6] , RA11_2, Ready_fast, \RA_c[11] , N_171, CASr2, FWEr_fast, RCKEEN_8_u_0_0, RCKEEN_8_u_1, RCKEEN_8, PHI2r, RCKEEN, RASr3, RASr, RCKE_2, RCKE_c, m18_0_a3_3, \S_0_i_o2[1] , N_165, N_462_0, Ready_0_sqmuxa, N_463_0, nRRAS_0_sqmuxa, CmdUFMCLK, N_129, UFMCLK_r_i_a2_2_2, UFMCLK_c, UFMCLK_r_i_m4_xx_mm_1, nUFMCS15, N_139_i, UFMCLK_RNO, UFMSDI_r_xx_mm_1, UFMSDI_c, UFMSDI_RNO, \MAin_c[4] , nRowColSel, \RowA[4] , \Din_c[4] , nCCAS_c, \RA_c[4] , \WRD[4] , \WRD[5] , \Bank[7] , \Bank[6] , \Bank[5] , \Bank[2] , \Din_c[7] , \WRD[6] , C1WR_0_a2_0_11, \WRD[7] , \Din_c[0] , \Din_c[2] , \Din_c[1] , XOR8MEG_3_u_0_a3_2, XOR8MEG_3, N_69, N_31, N_151, N_41, g0_1, nRCAS_0_sqmuxa_1, N_37_i, nRCAS_c, CASr3, RCKEEN_8_u_0_a2_1_out, N_28_i_1, N_28_i, nRCS_c, N_24_i, nRRAS_c, CBR_fast, m18_0_a2_1, FWEr, G_17_1, N_39_i, nRWE_c, N_179, nRowColSel_0_0, nUFMCS_c, nUFMCS_s_0_N_5_i_N_2L1, nUFMCS_s_0_N_5_i, CmdUFMCS, N_95_5, N_95_3, \RowA[0] , \RowA[1] , \MAin_c[5] , CmdUFMCLK_1_sqmuxa, \RowA[5] , N_137_8, un1_FS_14_i_a2_0_1, N_137_6, un1_FS_13_i_a2_1, \Bank[0] , C1WR_0_a2_0_10, \Bank[1] , \MAin_c[6] , \MAin_c[7] , C1WR_0_a2_0_3, \Bank[3] , \Bank[4] , C1WR_0_a2_0_4, UFMSDI_ens2_i_o2_0_3, \MAin_c[3] , \MAin_c[2] , \RowA[2] , \RowA[3] , CmdUFMSDI, CASr, CmdEnable16_1, m6_0_a2_2, \WRD[0] , \WRD[1] , g4_0_0_0, \MAin_c[9] , \MAin_c[8] , \RowA[8] , \RowA[9] , nFWE_c, \CROW_c[1] , \CROW_c[0] , \RBA_c[0] , \RBA_c[1] , \WRD[2] , \WRD[3] , \RA_c[9] , RDQML_c, RD_1_i, \RowA[6] , \RowA[7] , \RA_c[8] , RDQMH_c, \RA_c[0] , \RA_c[1] , \RA_c[7] , \RA_c[2] , \RA_c[6] , \RA_c[3] , \RA_c[5] , \RA_c[10] , \RD_in[0] , \RD_in[7] , \RD_in[6] , \RD_in[5] , \RD_in[4] , \RD_in[3] , \RD_in[2] , \RD_in[1] , VCCI, GNDI_TSALL; SLICE_0 SLICE_0( .A1(\FS[1] ), .A0(\FS[0] ), .CLK(RCLK_c), .Q0(\FS[0] ), .Q1(\FS[1] ), .FCO(\FS_cry[1] )); SLICE_1 SLICE_1( .A1(\FS[17] ), .A0(\FS[16] ), .CLK(RCLK_c), .FCI(\FS_cry[15] ), .Q0(\FS[16] ), .Q1(\FS[17] )); SLICE_2 SLICE_2( .A1(\FS[15] ), .A0(\FS[14] ), .CLK(RCLK_c), .FCI(\FS_cry[13] ), .Q0(\FS[14] ), .Q1(\FS[15] ), .FCO(\FS_cry[15] )); SLICE_3 SLICE_3( .A1(\FS[13] ), .A0(\FS[12] ), .CLK(RCLK_c), .FCI(\FS_cry[11] ), .Q0(\FS[12] ), .Q1(\FS[13] ), .FCO(\FS_cry[13] )); SLICE_4 SLICE_4( .A1(\FS[11] ), .A0(\FS[10] ), .CLK(RCLK_c), .FCI(\FS_cry[9] ), .Q0(\FS[10] ), .Q1(\FS[11] ), .FCO(\FS_cry[11] )); SLICE_5 SLICE_5( .A1(\FS[9] ), .A0(\FS[8] ), .CLK(RCLK_c), .FCI(\FS_cry[7] ), .Q0(\FS[8] ), .Q1(\FS[9] ), .FCO(\FS_cry[9] )); SLICE_6 SLICE_6( .A1(\FS[7] ), .A0(\FS[6] ), .CLK(RCLK_c), .FCI(\FS_cry[5] ), .Q0(\FS[6] ), .Q1(\FS[7] ), .FCO(\FS_cry[7] )); SLICE_7 SLICE_7( .A1(\FS[5] ), .A0(\FS[4] ), .CLK(RCLK_c), .FCI(\FS_cry[3] ), .Q0(\FS[4] ), .Q1(\FS[5] ), .FCO(\FS_cry[5] )); SLICE_8 SLICE_8( .A1(\FS[3] ), .A0(\FS[2] ), .CLK(RCLK_c), .FCI(\FS_cry[1] ), .Q0(\FS[2] ), .Q1(\FS[3] ), .FCO(\FS_cry[3] )); SLICE_9 SLICE_9( .D1(CmdEnable17_0_a2_4), .C1(CmdEnable17_0_a2_3), .B1(\MAin_c[0] ), .A1(N_147), .D0(ADSubmitted), .C0(CmdEnable17), .B0(CmdEnable16), .A0(C1WR_0_a2), .DI0(ADSubmitted_r), .CLK(PHI2_c), .F0(ADSubmitted_r), .Q0(ADSubmitted), .F1(CmdEnable17)); SLICE_14 SLICE_14( .D1(CmdEnable16_0_a2_5), .C1(CmdEnable16_0_a2_4), .A1(N_147), .D0(\MAin_c[1] ), .C0(CmdEnable16), .B0(C1Submitted), .A0(N_147), .DI0(C1Submitted_RNO), .CLK(PHI2_c), .F0(C1Submitted_RNO), .Q0(C1Submitted), .F1(CmdEnable16)); SLICE_19 SLICE_19( .D1(RASr2), .C1(\S[1] ), .B1(CO0), .A1(\IS[3] ), .C0(\S[1] ), .A0(CO0), .DI0(N_177_i), .LSR(RASr2), .CLK(RCLK_c), .F0(N_177_i), .Q0(CO0), .F1(Ready_0_sqmuxa_0_a3_2)); SLICE_20 SLICE_20( .B1(ADSubmitted), .A1(CmdEnable), .D0(CmdEnable17), .C0(un1_CMDWR), .B0(C1Submitted), .A0(CmdEnable), .DI0(CmdEnable_s), .M0(CmdEnable16), .CLK(PHI2_c), .OFX0(CmdEnable_s), .Q0(CmdEnable)); SLICE_21 SLICE_21( .D1(N_128), .B1(\Din_c[5] ), .A1(\Din_c[3] ), .D0(N_133), .C0(N_152), .B0(N_132), .A0(LEDEN), .DI0(N_21_i), .CE(XOR8MEG18), .CLK(PHI2_c), .F0(N_21_i), .Q0(CmdLEDEN), .F1(N_152)); SLICE_22 SLICE_22( .D1(CmdSubmitted), .C1(InitReady), .B1(PHI2r3), .A1(PHI2r2), .C0(CmdSubmitted_1_sqmuxa), .A0(CmdSubmitted), .DI0(N_460_0), .CLK(PHI2_c), .F0(N_460_0), .Q0(CmdSubmitted), .F1(N_136)); SLICE_26 SLICE_26( .D1(N_128), .C1(N_43), .B1(Cmdn8MEGEN), .A1(CmdEnable16_4), .D0(n8MEGEN), .C0(Cmdn8MEGEN_4_u_i_0), .A0(N_152), .DI0(N_19_i), .CE(XOR8MEG18), .CLK(PHI2_c), .F0(N_19_i), .Q0(Cmdn8MEGEN), .F1(Cmdn8MEGEN_4_u_i_0)); SLICE_29 SLICE_29( .D1(nRRAS_5_u_i_0), .C1(\IS[0] ), .B1(N_160), .A1(N_155), .D0(\IS[0] ), .B0(Ready), .A0(N_155), .DI0(N_64_i_i), .CLK(RCLK_c), .F0(N_64_i_i), .Q0(\IS[0] ), .F1(N_24)); SLICE_30 SLICE_30( .D1(\IS[0] ), .B1(\IS[1] ), .A1(\IS[2] ), .D0(\IS[0] ), .A0(\IS[1] ), .DI1(N_60_i_i), .DI0(N_56_i), .CE(N_159_i), .CLK(RCLK_c), .F0(N_56_i), .Q0(\IS[1] ), .F1(N_60_i_i), .Q1(\IS[2] )); SLICE_31 SLICE_31( .D1(\IS[2] ), .C1(N_159), .B1(\IS[1] ), .A1(\IS[3] ), .D0(\IS[2] ), .C0(\IS[0] ), .B0(\IS[1] ), .A0(\IS[3] ), .DI0(N_61_i_i), .CE(N_159_i), .CLK(RCLK_c), .F0(N_61_i_i), .Q0(\IS[3] ), .F1(RA10s_i)); SLICE_32 SLICE_32( .D1(N_126), .C1(N_51), .B1(UFMSDI_ens2_i_a2_4_2), .A1(InitReady), .B0(InitReady3), .A0(InitReady), .DI0(N_461_0), .CLK(RCLK_c), .F0(N_461_0), .Q0(InitReady), .F1(UFMSDI_ens2_i_a0)); SLICE_33 SLICE_33( .D1(nCRAS_c), .C1(LEDEN), .A1(CBR), .D0(UFMSDO_c), .C0(InitReady), .A0(CmdLEDEN), .DI0(N_70), .CE(N_33), .CLK(RCLK_c), .F0(N_70), .Q0(LEDEN), .F1(LED_c)); SLICE_39 SLICE_39( .D1(un1_Din_4), .A1(XOR8MEG), .D0(\Din_c[6] ), .C0(n8MEGEN), .A0(XOR8MEG), .DI0(RA11_2), .LSR(Ready_fast), .CLK(PHI2_c), .F0(RA11_2), .Q0(\RA_c[11] ), .F1(N_171)); SLICE_41 SLICE_41( .D1(CASr2), .C1(\S[1] ), .B1(CO0), .A1(FWEr_fast), .D0(CBR), .C0(Ready), .B0(RCKEEN_8_u_0_0), .A0(RCKEEN_8_u_1), .DI0(RCKEEN_8), .M1(PHI2r), .CLK(RCLK_c), .F0(RCKEEN_8), .Q0(RCKEEN), .F1(RCKEEN_8_u_1), .Q1(PHI2r2)); SLICE_42 SLICE_42( .D1(\IS[0] ), .C1(RASr2), .B1(\IS[2] ), .A1(\IS[1] ), .D0(RCKEEN), .C0(RASr3), .B0(RASr), .A0(RASr2), .DI0(RCKE_2), .M1(PHI2_c), .CLK(RCLK_c), .F0(RCKE_2), .Q0(RCKE_c), .F1(m18_0_a3_3), .Q1(PHI2r)); SLICE_43 SLICE_43( .D1(InitReady), .C1(RASr2), .B1(Ready), .A1(\S_0_i_o2[1] ), .D0(InitReady), .C0(Ready), .B0(N_165), .A0(Ready_0_sqmuxa_0_a3_2), .DI0(N_462_0), .M1(PHI2r2), .CLK(RCLK_c), .F0(N_462_0), .Q0(Ready), .F1(RCKEEN_8_u_0_0), .Q1(PHI2r3)); SLICE_44 SLICE_44( .D1(Ready), .C1(InitReady), .B1(Ready_0_sqmuxa_0_a3_2), .A1(N_165), .C0(Ready_0_sqmuxa), .A0(Ready_fast), .DI0(N_463_0), .M1(nCRAS_c), .CLK(RCLK_c), .F0(N_463_0), .Q0(Ready_fast), .F1(Ready_0_sqmuxa), .Q1(RASr)); SLICE_50 SLICE_50( .D1(Ready), .C1(CO0), .B1(\S[1] ), .C0(CO0), .A0(\S[1] ), .DI0(\S_0_i_o2[1] ), .LSR(RASr2), .CLK(RCLK_c), .F0(\S_0_i_o2[1] ), .Q0(\S[1] ), .F1(nRRAS_0_sqmuxa)); SLICE_51 SLICE_51( .D1(CmdUFMCLK), .C1(N_129), .B1(InitReady), .A1(UFMCLK_r_i_a2_2_2), .D0(UFMCLK_c), .C0(UFMCLK_r_i_m4_xx_mm_1), .B0(nUFMCS15), .A0(N_139_i), .DI0(UFMCLK_RNO), .M1(RASr), .CLK(RCLK_c), .F0(UFMCLK_RNO), .Q0(UFMCLK_c), .F1(UFMCLK_r_i_m4_xx_mm_1), .Q1(RASr2)); SLICE_52 SLICE_52( .D1(PHI2r2), .C1(PHI2r3), .B1(InitReady), .A1(CmdSubmitted), .D0(UFMSDI_r_xx_mm_1), .C0(N_139_i), .B0(UFMSDI_c), .A0(nUFMCS15), .DI0(UFMSDI_RNO), .M1(RASr2), .CLK(RCLK_c), .F0(UFMSDI_RNO), .Q0(UFMSDI_c), .F1(N_139_i), .Q1(RASr3)); SLICE_55 SLICE_55( .D0(\MAin_c[4] ), .B0(nRowColSel), .A0(\RowA[4] ), .M1(\Din_c[5] ), .M0(\Din_c[4] ), .CLK(nCCAS_c), .F0(\RA_c[4] ), .Q0(\WRD[4] ), .Q1(\WRD[5] )); SLICE_56 SLICE_56( .D1(\Bank[7] ), .C1(\Bank[6] ), .B1(\Bank[5] ), .A1(\Bank[2] ), .D0(\FS[5] ), .C0(\FS[9] ), .B0(\FS[7] ), .M1(\Din_c[7] ), .M0(\Din_c[6] ), .CLK(nCCAS_c), .F0(N_126), .Q0(\WRD[6] ), .F1(C1WR_0_a2_0_11), .Q1(\WRD[7] )); SLICE_57 SLICE_57( .D1(un1_Din_4), .C1(\Din_c[0] ), .B1(\Din_c[2] ), .A1(\Din_c[3] ), .D0(\Din_c[1] ), .C0(XOR8MEG_3_u_0_a3_2), .B0(LEDEN), .A0(N_171), .DI0(XOR8MEG_3), .CE(XOR8MEG18), .CLK(PHI2_c), .F0(XOR8MEG_3), .Q0(XOR8MEG), .F1(XOR8MEG_3_u_0_a3_2)); SLICE_58 SLICE_58( .D1(N_51), .C1(InitReady), .A1(\FS[8] ), .D0(UFMSDO_c), .C0(InitReady), .B0(Cmdn8MEGEN), .DI0(N_69), .CE(N_31), .CLK(RCLK_c), .F0(N_69), .Q0(n8MEGEN), .F1(N_151)); SLICE_59 SLICE_59( .D1(N_155), .C1(\S[1] ), .B1(Ready), .A1(N_160), .D0(N_41), .C0(\S[1] ), .B0(g0_1), .A0(nRCAS_0_sqmuxa_1), .DI0(N_37_i), .CLK(RCLK_c), .F0(N_37_i), .Q0(nRCAS_c), .F1(N_41)); SLICE_60 SLICE_60( .D1(FWEr_fast), .C1(CO0), .B1(CASr2), .A1(CASr3), .D0(RCKEEN_8_u_0_a2_1_out), .C0(N_28_i_1), .B0(N_24), .A0(CBR), .DI0(N_28_i), .CLK(RCLK_c), .F0(N_28_i), .Q0(nRCS_c), .F1(N_28_i_1)); SLICE_61 SLICE_61( .D1(\S_0_i_o2[1] ), .C1(RCKE_c), .B1(Ready), .A1(RASr2), .D0(\IS[0] ), .C0(N_155), .B0(nRRAS_5_u_i_0), .A0(N_160), .DI0(N_24_i), .CLK(RCLK_c), .F0(N_24_i), .Q0(nRRAS_c), .F1(nRRAS_5_u_i_0)); SLICE_62 SLICE_62( .D1(RASr2), .C1(\S_0_i_o2[1] ), .B1(Ready), .A1(CBR_fast), .D0(m18_0_a2_1), .C0(nRCAS_0_sqmuxa_1), .B0(FWEr), .A0(G_17_1), .DI0(N_39_i), .CLK(RCLK_c), .F0(N_39_i), .Q0(nRWE_c), .F1(nRCAS_0_sqmuxa_1)); SLICE_63 SLICE_63( .D1(FWEr), .C1(CASr3), .B1(Ready), .A1(CBR), .D0(\S[1] ), .C0(N_179), .B0(Ready), .A0(CO0), .DI0(nRowColSel_0_0), .LSR(nRRAS_0_sqmuxa), .CLK(RCLK_c), .F0(nRowColSel_0_0), .Q0(nRowColSel), .F1(N_179)); SLICE_64 SLICE_64( .D1(\FS[11] ), .C1(InitReady), .B1(N_51), .A1(\FS[10] ), .D0(N_139_i), .C0(nUFMCS_c), .B0(nUFMCS15), .A0(nUFMCS_s_0_N_5_i_N_2L1), .DI0(nUFMCS_s_0_N_5_i), .CLK(RCLK_c), .F0(nUFMCS_s_0_N_5_i), .Q0(nUFMCS_c), .F1(nUFMCS15)); nRWE_RNO_1_SLICE_65 \nRWE_RNO_1/SLICE_65 ( .D1(RASr2), .C1(\S[1] ), .B1(CO0), .A1(RCKE_c), .D0(m18_0_a3_3), .C0(\S[1] ), .B0(CO0), .A0(InitReady), .M0(Ready), .OFX0(m18_0_a2_1)); SLICE_66 SLICE_66( .D1(CmdUFMCS), .C1(UFMCLK_r_i_a2_2_2), .B1(InitReady), .D0(N_95_5), .C0(N_95_3), .B0(InitReady), .A0(\FS[16] ), .M1(\MAin_c[1] ), .M0(\MAin_c[0] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(UFMCLK_r_i_a2_2_2), .Q0(\RowA[0] ), .F1(nUFMCS_s_0_N_5_i_N_2L1), .Q1(\RowA[1] )); SLICE_67 SLICE_67( .D1(N_128), .C1(\Din_c[3] ), .B1(\Din_c[5] ), .A1(XOR8MEG18), .D0(CmdEnable), .C0(\MAin_c[0] ), .B0(\MAin_c[1] ), .A0(N_147), .M1(\MAin_c[5] ), .M0(\MAin_c[4] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(XOR8MEG18), .Q0(\RowA[4] ), .F1(CmdUFMCLK_1_sqmuxa), .Q1(\RowA[5] )); SLICE_68 SLICE_68( .D1(\FS[5] ), .C1(\FS[2] ), .B1(\FS[0] ), .A1(\FS[3] ), .D0(N_137_8), .C0(N_136), .B0(un1_FS_14_i_a2_0_1), .A0(N_137_6), .F0(N_31), .F1(un1_FS_14_i_a2_0_1)); SLICE_69 SLICE_69( .D1(\FS[0] ), .C1(\FS[3] ), .B1(\FS[5] ), .A1(\FS[2] ), .D0(N_137_8), .C0(N_136), .B0(N_137_6), .A0(un1_FS_13_i_a2_1), .F0(N_33), .F1(un1_FS_13_i_a2_1)); SLICE_70 SLICE_70( .D1(\Bank[0] ), .C1(C1WR_0_a2_0_10), .B1(C1WR_0_a2_0_11), .A1(\Bank[1] ), .C0(N_147), .A0(\MAin_c[1] ), .M1(\Din_c[1] ), .M0(\Din_c[0] ), .CLK(PHI2_c), .F0(C1WR_0_a2), .Q0(\Bank[0] ), .F1(N_147), .Q1(\Bank[1] )); SLICE_71 SLICE_71( .D1(\MAin_c[6] ), .C1(\MAin_c[7] ), .B1(\MAin_c[4] ), .A1(\MAin_c[5] ), .D0(C1WR_0_a2_0_3), .C0(\Bank[3] ), .B0(\Bank[4] ), .A0(C1WR_0_a2_0_4), .M1(\Din_c[3] ), .M0(\Din_c[2] ), .CLK(PHI2_c), .F0(C1WR_0_a2_0_10), .Q0(\Bank[2] ), .F1(C1WR_0_a2_0_4), .Q1(\Bank[3] )); SLICE_72 SLICE_72( .D1(UFMSDI_ens2_i_o2_0_3), .C1(\FS[16] ), .A1(\FS[12] ), .D0(\FS[4] ), .C0(N_51), .B0(\FS[11] ), .A0(\FS[1] ), .M1(\MAin_c[3] ), .M0(\MAin_c[2] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(N_129), .Q0(\RowA[2] ), .F1(N_51), .Q1(\RowA[3] )); SLICE_73 SLICE_73( .D1(InitReady), .C1(\S[1] ), .B1(RASr2), .A1(CO0), .C0(N_155), .A0(Ready), .M1(\Din_c[2] ), .M0(\Din_c[1] ), .CE(CmdUFMCLK_1_sqmuxa), .CLK(PHI2_c), .F0(N_159), .Q0(CmdUFMCLK), .F1(N_155), .Q1(CmdUFMCS)); SLICE_74 SLICE_74( .B1(\FS[11] ), .A1(\FS[14] ), .D0(N_95_5), .C0(N_95_3), .B0(\FS[16] ), .A0(\FS[10] ), .M0(\Din_c[0] ), .CE(CmdUFMCLK_1_sqmuxa), .CLK(PHI2_c), .F0(InitReady3), .Q0(CmdUFMSDI), .F1(N_95_3)); SLICE_75 SLICE_75( .D1(\Din_c[7] ), .B1(\Din_c[6] ), .A1(\Din_c[4] ), .D0(\Din_c[1] ), .C0(N_128), .B0(\Din_c[5] ), .M1(CASr), .M0(nCCAS_c), .CLK(RCLK_c), .F0(N_133), .Q0(CASr), .F1(N_128), .Q1(CASr2)); SLICE_76 SLICE_76( .D1(\Din_c[0] ), .B1(\Din_c[5] ), .D0(\MAin_c[0] ), .C0(CmdEnable16_4), .B0(\Din_c[1] ), .A0(\Din_c[3] ), .M1(\Din_c[5] ), .M0(\Din_c[4] ), .CLK(PHI2_c), .F0(CmdEnable16_0_a2_4), .Q0(\Bank[4] ), .F1(CmdEnable16_4), .Q1(\Bank[5] )); SLICE_77 SLICE_77( .D1(\Din_c[4] ), .A1(\Din_c[7] ), .D0(\Din_c[6] ), .C0(\MAin_c[1] ), .B0(CmdEnable16_1), .A0(\Din_c[2] ), .M1(\Din_c[7] ), .M0(\Din_c[6] ), .CLK(PHI2_c), .F0(CmdEnable16_0_a2_5), .Q0(\Bank[6] ), .F1(CmdEnable16_1), .Q1(\Bank[7] )); SLICE_78 SLICE_78( .D1(\Din_c[3] ), .B1(\Din_c[5] ), .D0(\MAin_c[1] ), .C0(N_43), .B0(\Din_c[6] ), .A0(\Din_c[2] ), .M1(nCCAS_c), .M0(nCCAS_c), .CLK(nCRAS_c), .F0(CmdEnable17_0_a2_4), .Q0(CBR), .F1(N_43), .Q1(CBR_fast)); SLICE_79 SLICE_79( .D1(CASr3), .B1(CASr2), .A1(Ready), .D0(CO0), .C0(\S[1] ), .B0(m6_0_a2_2), .A0(CBR), .M1(\Din_c[1] ), .M0(\Din_c[0] ), .CLK(nCCAS_c), .F0(G_17_1), .Q0(\WRD[0] ), .F1(m6_0_a2_2), .Q1(\WRD[1] )); SLICE_80 SLICE_80( .D1(CASr2), .B1(CASr3), .D0(FWEr), .C0(CO0), .B0(g4_0_0_0), .A0(CBR_fast), .M1(\MAin_c[9] ), .M0(\MAin_c[8] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(g0_1), .Q0(\RowA[8] ), .F1(g4_0_0_0), .Q1(\RowA[9] )); SLICE_81 SLICE_81( .D1(\FS[13] ), .C1(\FS[14] ), .B1(\FS[15] ), .A1(\FS[17] ), .D0(\FS[13] ), .C0(\FS[17] ), .B0(\FS[15] ), .A0(\FS[12] ), .M1(nFWE_c), .M0(nFWE_c), .CLK(nCRAS_c), .F0(N_95_5), .Q0(FWEr), .F1(UFMSDI_ens2_i_o2_0_3), .Q1(FWEr_fast)); SLICE_82 SLICE_82( .D1(\Din_c[3] ), .C1(N_128), .B1(CmdLEDEN), .A1(\Din_c[5] ), .D0(XOR8MEG18), .C0(\Din_c[3] ), .B0(N_128), .A0(\Din_c[5] ), .M0(CASr2), .CLK(RCLK_c), .F0(CmdSubmitted_1_sqmuxa), .Q0(CASr3), .F1(N_132)); SLICE_83 SLICE_83( .C1(\IS[1] ), .B1(\IS[3] ), .A1(\IS[2] ), .C0(\IS[1] ), .B0(\IS[0] ), .A0(\IS[2] ), .M1(\CROW_c[1] ), .M0(\CROW_c[0] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(N_165), .Q0(\RBA_c[0] ), .F1(N_160), .Q1(\RBA_c[1] )); SLICE_84 SLICE_84( .D1(\FS[6] ), .C1(\FS[10] ), .B1(\FS[11] ), .A1(\FS[8] ), .D0(\FS[7] ), .C0(\FS[10] ), .B0(\FS[1] ), .A0(\FS[6] ), .F0(N_137_6), .F1(UFMSDI_ens2_i_a2_4_2)); SLICE_85 SLICE_85( .D1(\Din_c[4] ), .C1(\Din_c[0] ), .B1(\Din_c[1] ), .A1(\Din_c[7] ), .D0(\Din_c[5] ), .C0(\Din_c[4] ), .B0(\Din_c[6] ), .A0(\Din_c[7] ), .M1(\Din_c[3] ), .M0(\Din_c[2] ), .CLK(nCCAS_c), .F0(un1_Din_4), .Q0(\WRD[2] ), .F1(CmdEnable17_0_a2_3), .Q1(\WRD[3] )); SLICE_86 SLICE_86( .D1(nRowColSel), .A1(\MAin_c[9] ), .D0(nRowColSel), .C0(\RowA[9] ), .A0(\MAin_c[9] ), .F0(\RA_c[9] ), .F1(RDQML_c)); SLICE_87 SLICE_87( .D1(UFMSDI_ens2_i_a0), .B1(N_151), .A1(CmdUFMSDI), .D0(N_151), .C0(\FS[9] ), .B0(\FS[11] ), .A0(\FS[4] ), .F0(N_137_8), .F1(UFMSDI_r_xx_mm_1)); SLICE_88 SLICE_88( .D1(\MAin_c[2] ), .C1(nFWE_c), .B1(\MAin_c[3] ), .C0(nFWE_c), .A0(nCCAS_c), .M1(\MAin_c[7] ), .M0(\MAin_c[6] ), .LSR(Ready_fast), .CLK(nCRAS_c), .F0(RD_1_i), .Q0(\RowA[6] ), .F1(C1WR_0_a2_0_3), .Q1(\RowA[7] )); SLICE_89 SLICE_89( .D1(nRowColSel), .C1(\MAin_c[9] ), .D0(nRowColSel), .B0(\MAin_c[8] ), .A0(\RowA[8] ), .F0(\RA_c[8] ), .F1(RDQMH_c)); SLICE_90 SLICE_90( .D1(\MAin_c[0] ), .C1(\MAin_c[1] ), .B1(N_147), .D0(\MAin_c[0] ), .B0(\RowA[0] ), .A0(nRowColSel), .F0(\RA_c[0] ), .F1(un1_CMDWR)); SLICE_91 SLICE_91( .D1(\MAin_c[7] ), .C1(nRowColSel), .A1(\RowA[7] ), .D0(\RowA[1] ), .C0(nRowColSel), .B0(\MAin_c[1] ), .F0(\RA_c[1] ), .F1(\RA_c[7] )); SLICE_92 SLICE_92( .D1(\RowA[6] ), .C1(nRowColSel), .A1(\MAin_c[6] ), .D0(\MAin_c[2] ), .C0(nRowColSel), .B0(\RowA[2] ), .F0(\RA_c[2] ), .F1(\RA_c[6] )); SLICE_93 SLICE_93( .C1(\MAin_c[5] ), .B1(\RowA[5] ), .A1(nRowColSel), .D0(\MAin_c[3] ), .B0(nRowColSel), .A0(\RowA[3] ), .F0(\RA_c[3] ), .F1(\RA_c[5] )); SLICE_94 SLICE_94( .B1(N_155), .A1(Ready), .C0(\S[1] ), .A0(Ready), .M0(\IS[0] ), .LSR(RA10s_i), .CLK(RCLK_c), .F0(RCKEEN_8_u_0_a2_1_out), .Q0(\RA_c[10] ), .F1(N_159_i)); RD_0_ \RD[0]_I ( .PADDI(\RD_in[0] ), .PADDT(RD_1_i), .PADDO(\WRD[0] ), .RD0(RD[0])); Dout_0_ \Dout[0]_I ( .PADDO(\RD_in[0] ), .Dout0(Dout[0])); PHI2 PHI2_I( .PADDI(PHI2_c), .PHI2(PHI2)); UFMSDO UFMSDO_I( .PADDI(UFMSDO_c), .UFMSDO(UFMSDO)); UFMSDI UFMSDI_I( .PADDO(UFMSDI_c), .UFMSDI(UFMSDI)); UFMCLK UFMCLK_I( .PADDO(UFMCLK_c), .UFMCLK(UFMCLK)); nUFMCS nUFMCS_I( .PADDO(nUFMCS_c), .nUFMCS(nUFMCS)); RDQML RDQML_I( .PADDO(RDQML_c), .RDQML(RDQML)); RDQMH RDQMH_I( .PADDO(RDQMH_c), .RDQMH(RDQMH)); nRCAS nRCAS_I( .PADDO(nRCAS_c), .nRCAS(nRCAS)); nRRAS nRRAS_I( .PADDO(nRRAS_c), .nRRAS(nRRAS)); nRWE nRWE_I( .PADDO(nRWE_c), .nRWE(nRWE)); RCKE RCKE_I( .PADDO(RCKE_c), .RCKE(RCKE)); RCLK RCLK_I( .PADDI(RCLK_c), .RCLK(RCLK)); nRCS nRCS_I( .PADDO(nRCS_c), .nRCS(nRCS)); RD_7_ \RD[7]_I ( .PADDI(\RD_in[7] ), .PADDT(RD_1_i), .PADDO(\WRD[7] ), .RD7(RD[7])); RD_6_ \RD[6]_I ( .PADDI(\RD_in[6] ), .PADDT(RD_1_i), .PADDO(\WRD[6] ), .RD6(RD[6])); RD_5_ \RD[5]_I ( .PADDI(\RD_in[5] ), .PADDT(RD_1_i), .PADDO(\WRD[5] ), .RD5(RD[5])); RD_4_ \RD[4]_I ( .PADDI(\RD_in[4] ), .PADDT(RD_1_i), .PADDO(\WRD[4] ), .RD4(RD[4])); RD_3_ \RD[3]_I ( .PADDI(\RD_in[3] ), .PADDT(RD_1_i), .PADDO(\WRD[3] ), .RD3(RD[3])); RD_2_ \RD[2]_I ( .PADDI(\RD_in[2] ), .PADDT(RD_1_i), .PADDO(\WRD[2] ), .RD2(RD[2])); RD_1_ \RD[1]_I ( .PADDI(\RD_in[1] ), .PADDT(RD_1_i), .PADDO(\WRD[1] ), .RD1(RD[1])); RA_11_ \RA[11]_I ( .PADDO(\RA_c[11] ), .RA11(RA[11])); RA_10_ \RA[10]_I ( .PADDO(\RA_c[10] ), .RA10(RA[10])); RA_9_ \RA[9]_I ( .PADDO(\RA_c[9] ), .RA9(RA[9])); RA_8_ \RA[8]_I ( .PADDO(\RA_c[8] ), .RA8(RA[8])); RA_7_ \RA[7]_I ( .PADDO(\RA_c[7] ), .RA7(RA[7])); RA_6_ \RA[6]_I ( .PADDO(\RA_c[6] ), .RA6(RA[6])); RA_5_ \RA[5]_I ( .PADDO(\RA_c[5] ), .RA5(RA[5])); RA_4_ \RA[4]_I ( .PADDO(\RA_c[4] ), .RA4(RA[4])); RA_3_ \RA[3]_I ( .PADDO(\RA_c[3] ), .RA3(RA[3])); RA_2_ \RA[2]_I ( .PADDO(\RA_c[2] ), .RA2(RA[2])); RA_1_ \RA[1]_I ( .PADDO(\RA_c[1] ), .RA1(RA[1])); RA_0_ \RA[0]_I ( .PADDO(\RA_c[0] ), .RA0(RA[0])); RBA_1_ \RBA[1]_I ( .PADDO(\RBA_c[1] ), .RBA1(RBA[1])); RBA_0_ \RBA[0]_I ( .PADDO(\RBA_c[0] ), .RBA0(RBA[0])); LED LED_I( .PADDO(LED_c), .LED(LED)); nFWE nFWE_I( .PADDI(nFWE_c), .nFWE(nFWE)); nCRAS nCRAS_I( .PADDI(nCRAS_c), .nCRAS(nCRAS)); nCCAS nCCAS_I( .PADDI(nCCAS_c), .nCCAS(nCCAS)); Dout_7_ \Dout[7]_I ( .PADDO(\RD_in[7] ), .Dout7(Dout[7])); Dout_6_ \Dout[6]_I ( .PADDO(\RD_in[6] ), .Dout6(Dout[6])); Dout_5_ \Dout[5]_I ( .PADDO(\RD_in[5] ), .Dout5(Dout[5])); Dout_4_ \Dout[4]_I ( .PADDO(\RD_in[4] ), .Dout4(Dout[4])); Dout_3_ \Dout[3]_I ( .PADDO(\RD_in[3] ), .Dout3(Dout[3])); Dout_2_ \Dout[2]_I ( .PADDO(\RD_in[2] ), .Dout2(Dout[2])); Dout_1_ \Dout[1]_I ( .PADDO(\RD_in[1] ), .Dout1(Dout[1])); Din_7_ \Din[7]_I ( .PADDI(\Din_c[7] ), .Din7(Din[7])); Din_6_ \Din[6]_I ( .PADDI(\Din_c[6] ), .Din6(Din[6])); Din_5_ \Din[5]_I ( .PADDI(\Din_c[5] ), .Din5(Din[5])); Din_4_ \Din[4]_I ( .PADDI(\Din_c[4] ), .Din4(Din[4])); Din_3_ \Din[3]_I ( .PADDI(\Din_c[3] ), .Din3(Din[3])); Din_2_ \Din[2]_I ( .PADDI(\Din_c[2] ), .Din2(Din[2])); Din_1_ \Din[1]_I ( .PADDI(\Din_c[1] ), .Din1(Din[1])); Din_0_ \Din[0]_I ( .PADDI(\Din_c[0] ), .Din0(Din[0])); CROW_1_ \CROW[1]_I ( .PADDI(\CROW_c[1] ), .CROW1(CROW[1])); CROW_0_ \CROW[0]_I ( .PADDI(\CROW_c[0] ), .CROW0(CROW[0])); MAin_9_ \MAin[9]_I ( .PADDI(\MAin_c[9] ), .MAin9(MAin[9])); MAin_8_ \MAin[8]_I ( .PADDI(\MAin_c[8] ), .MAin8(MAin[8])); MAin_7_ \MAin[7]_I ( .PADDI(\MAin_c[7] ), .MAin7(MAin[7])); MAin_6_ \MAin[6]_I ( .PADDI(\MAin_c[6] ), .MAin6(MAin[6])); MAin_5_ \MAin[5]_I ( .PADDI(\MAin_c[5] ), .MAin5(MAin[5])); MAin_4_ \MAin[4]_I ( .PADDI(\MAin_c[4] ), .MAin4(MAin[4])); MAin_3_ \MAin[3]_I ( .PADDI(\MAin_c[3] ), .MAin3(MAin[3])); MAin_2_ \MAin[2]_I ( .PADDI(\MAin_c[2] ), .MAin2(MAin[2])); MAin_1_ \MAin[1]_I ( .PADDI(\MAin_c[1] ), .MAin1(MAin[1])); MAin_0_ \MAin[0]_I ( .PADDI(\MAin_c[0] ), .MAin0(MAin[0])); VHI VHI_INST( .Z(VCCI)); PUR PUR_INST( .PUR(VCCI)); GSR GSR_INST( .GSR(VCCI)); VLO VLO_INST( .Z(GNDI_TSALL)); TSALL TSALL_INST( .TSALL(GNDI_TSALL)); endmodule module SLICE_0 ( input A1, A0, CLK, output Q0, Q1, FCO ); wire VCCI, \SLICE_0/FS_cry_0[0]_S1 , GNDI, \SLICE_0/FS_cry_0[0]_S0 , A1_dly, CLK_dly, A0_dly; vmuxregsre \FS[1] ( .D0(VCCI), .D1(\SLICE_0/FS_cry_0[0]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[0] ( .D0(VCCI), .D1(\SLICE_0/FS_cry_0[0]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[0] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(VCCI), .S0(\SLICE_0/FS_cry_0[0]_S0 ), .S1(\SLICE_0/FS_cry_0[0]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); endspecify endmodule module vmuxregsre ( input D0, D1, SD, SP, CK, LSR, output Q ); FL1P3DX INST01( .D0(D0), .D1(D1), .SP(SP), .CK(CK), .SD(SD), .CD(LSR), .Q(Q)); defparam INST01.GSR = "DISABLED"; endmodule module vcc ( output PWR1 ); VHI INST1( .Z(PWR1)); endmodule module gnd ( output PWR0 ); VLO INST1( .Z(PWR0)); endmodule module ccu2 ( input A0, B0, C0, D0, A1, B1, C1, D1, CI, output S0, S1, CO0, CO1 ); CCU2 inst1( .CIN(CI), .A0(A0), .B0(B0), .C0(C0), .D0(D0), .A1(A1), .B1(B1), .C1(C1), .D1(D1), .S0(S0), .S1(S1), .COUT0(CO0), .COUT1(CO1)); defparam inst1.INIT0 = 16'h300a; defparam inst1.INIT1 = 16'h300a; defparam inst1.INJECT1_0 = "NO"; defparam inst1.INJECT1_1 = "NO"; endmodule module SLICE_1 ( input A1, A0, CLK, FCI, output Q0, Q1 ); wire VCCI, \SLICE_1/FS_cry_0[16]_S1 , GNDI, \SLICE_1/FS_cry_0[16]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[17] ( .D0(VCCI), .D1(\SLICE_1/FS_cry_0[16]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[16] ( .D0(VCCI), .D1(\SLICE_1/FS_cry_0[16]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu20001 \FS_cry_0[16] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_1/FS_cry_0[16]_S0 ), .S1(\SLICE_1/FS_cry_0[16]_S1 ), .CO0(), .CO1()); specify (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module ccu20001 ( input A0, B0, C0, D0, A1, B1, C1, D1, CI, output S0, S1, CO0, CO1 ); CCU2 inst1( .CIN(CI), .A0(A0), .B0(B0), .C0(C0), .D0(D0), .A1(A1), .B1(B1), .C1(C1), .D1(D1), .S0(S0), .S1(S1), .COUT0(CO0), .COUT1(CO1)); defparam inst1.INIT0 = 16'h300a; defparam inst1.INIT1 = 16'h5002; defparam inst1.INJECT1_0 = "NO"; defparam inst1.INJECT1_1 = "NO"; endmodule module SLICE_2 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_2/FS_cry_0[14]_S1 , GNDI, \SLICE_2/FS_cry_0[14]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[15] ( .D0(VCCI), .D1(\SLICE_2/FS_cry_0[14]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[14] ( .D0(VCCI), .D1(\SLICE_2/FS_cry_0[14]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[14] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_2/FS_cry_0[14]_S0 ), .S1(\SLICE_2/FS_cry_0[14]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_3 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_3/FS_cry_0[12]_S1 , GNDI, \SLICE_3/FS_cry_0[12]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[13] ( .D0(VCCI), .D1(\SLICE_3/FS_cry_0[12]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[12] ( .D0(VCCI), .D1(\SLICE_3/FS_cry_0[12]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[12] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_3/FS_cry_0[12]_S0 ), .S1(\SLICE_3/FS_cry_0[12]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_4 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_4/FS_cry_0[10]_S1 , GNDI, \SLICE_4/FS_cry_0[10]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[11] ( .D0(VCCI), .D1(\SLICE_4/FS_cry_0[10]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[10] ( .D0(VCCI), .D1(\SLICE_4/FS_cry_0[10]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[10] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_4/FS_cry_0[10]_S0 ), .S1(\SLICE_4/FS_cry_0[10]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_5 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_5/FS_cry_0[8]_S1 , GNDI, \SLICE_5/FS_cry_0[8]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[9] ( .D0(VCCI), .D1(\SLICE_5/FS_cry_0[8]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[8] ( .D0(VCCI), .D1(\SLICE_5/FS_cry_0[8]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[8] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_5/FS_cry_0[8]_S0 ), .S1(\SLICE_5/FS_cry_0[8]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_6 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_6/FS_cry_0[6]_S1 , GNDI, \SLICE_6/FS_cry_0[6]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[7] ( .D0(VCCI), .D1(\SLICE_6/FS_cry_0[6]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[6] ( .D0(VCCI), .D1(\SLICE_6/FS_cry_0[6]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[6] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_6/FS_cry_0[6]_S0 ), .S1(\SLICE_6/FS_cry_0[6]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_7 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_7/FS_cry_0[4]_S1 , GNDI, \SLICE_7/FS_cry_0[4]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[5] ( .D0(VCCI), .D1(\SLICE_7/FS_cry_0[4]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[4] ( .D0(VCCI), .D1(\SLICE_7/FS_cry_0[4]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[4] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_7/FS_cry_0[4]_S0 ), .S1(\SLICE_7/FS_cry_0[4]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_8 ( input A1, A0, CLK, FCI, output Q0, Q1, FCO ); wire VCCI, \SLICE_8/FS_cry_0[2]_S1 , GNDI, \SLICE_8/FS_cry_0[2]_S0 , A1_dly, CLK_dly, A0_dly, FCI_dly; vmuxregsre \FS[3] ( .D0(VCCI), .D1(\SLICE_8/FS_cry_0[2]_S1 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \FS[2] ( .D0(VCCI), .D1(\SLICE_8/FS_cry_0[2]_S0 ), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); ccu2 \FS_cry_0[2] ( .A0(A0_dly), .B0(GNDI), .C0(GNDI), .D0(GNDI), .A1(A1_dly), .B1(GNDI), .C1(GNDI), .D1(GNDI), .CI(FCI_dly), .S0(\SLICE_8/FS_cry_0[2]_S0 ), .S1(\SLICE_8/FS_cry_0[2]_S1 ), .CO0(), .CO1(FCO)); specify (A1 => FCO) = (0:0:0,0:0:0); (A0 => FCO) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); (FCI => FCO) = (0:0:0,0:0:0); $setuphold (posedge CLK, A1, 0:0:0, 0:0:0,,,, CLK_dly, A1_dly); $setuphold (posedge CLK, A0, 0:0:0, 0:0:0,,,, CLK_dly, A0_dly); $setuphold (posedge CLK, FCI, 0:0:0, 0:0:0,,,, CLK_dly, FCI_dly); endspecify endmodule module SLICE_9 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, CLK_NOTIN, GNDI, DI0_dly, CLK_dly; lut4 CmdEnable17_0_a2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40002 ADSubmitted_r( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre ADSubmitted( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); endspecify endmodule module lut4 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40002 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3130) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module inverter ( input I, output Z ); INV INST1( .A(I), .Z(Z)); endmodule module SLICE_14 ( input D1, C1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, CLK_NOTIN, DI0_dly, CLK_dly; lut40003 CmdEnable16_0_a2( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40004 C1Submitted_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre C1Submitted( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); endspecify endmodule module lut40003 ( input A, B, C, D, output Z ); ROM16X1 #(16'hA000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40004 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF4FC) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_19 ( input D1, C1, B1, A1, C0, A0, DI0, LSR, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, LSR_NOTIN, DI0_dly, CLK_dly, LSR_dly; lut40005 Ready_0_sqmuxa_0_a3_2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40006 \S_RNO[0] ( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre0007 \S[0] ( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(LSR_NOTIN), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40005 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0080) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40006 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF5F5) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module vmuxregsre0007 ( input D0, D1, SD, SP, CK, LSR, output Q ); FL1P3IY INST01( .D0(D0), .D1(D1), .SP(SP), .CK(CK), .SD(SD), .CD(LSR), .Q(Q)); defparam INST01.GSR = "DISABLED"; endmodule module SLICE_20 ( input B1, A1, D0, C0, B0, A0, DI0, M0, CLK, output OFX0, Q0 ); wire GNDI, \SLICE_20/SLICE_20_K1_H1 , \SLICE_20/CmdEnable_s/GATE_H0 , VCCI, CLK_NOTIN, DI0_dly, CLK_dly; lut40008 SLICE_20_K1( .A(A1), .B(B1), .C(GNDI), .D(GNDI), .Z(\SLICE_20/SLICE_20_K1_H1 )); gnd DRIVEGND( .PWR0(GNDI)); lut40009 \CmdEnable_s/GATE ( .A(A0), .B(B0), .C(C0), .D(D0), .Z(\SLICE_20/CmdEnable_s/GATE_H0 )); vmuxregsre CmdEnable( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); selmux2 SLICE_20_K0K1MUX( .D0(\SLICE_20/CmdEnable_s/GATE_H0 ), .D1(\SLICE_20/SLICE_20_K1_H1 ), .SD(M0), .Z(OFX0)); specify (B1 => OFX0) = (0:0:0,0:0:0); (A1 => OFX0) = (0:0:0,0:0:0); (D0 => OFX0) = (0:0:0,0:0:0); (C0 => OFX0) = (0:0:0,0:0:0); (B0 => OFX0) = (0:0:0,0:0:0); (A0 => OFX0) = (0:0:0,0:0:0); (M0 => OFX0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); endspecify endmodule module lut40008 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEEEE) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40009 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEA0A) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module selmux2 ( input D0, D1, SD, output Z ); MUX21 INST1( .D0(D0), .D1(D1), .SD(SD), .Z(Z)); endmodule module SLICE_21 ( input D1, B1, A1, D0, C0, B0, A0, DI0, CE, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, CLK_NOTIN, DI0_dly, CLK_dly, CE_dly; lut40010 Cmdn8MEGEN_4_u_i_a2_2( .A(A1), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40011 CmdLEDEN_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre CmdLEDEN( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (negedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); endspecify endmodule module lut40010 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0044) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40011 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0023) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_22 ( input D1, C1, B1, A1, C0, A0, DI0, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, CLK_NOTIN, DI0_dly, CLK_dly; lut40012 un1_FS_14_i_a2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40013 CmdSubmitted_RNO( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre CmdSubmitted( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); endspecify endmodule module lut40012 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40013 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFAFA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_26 ( input D1, C1, B1, A1, D0, C0, A0, DI0, CE, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, CLK_NOTIN, DI0_dly, CLK_dly, CE_dly; lut40014 Cmdn8MEGEN_4_u_i_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40015 Cmdn8MEGEN_RNO( .A(A0), .B(GNDI), .C(C0), .D(D0), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre Cmdn8MEGEN( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (negedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); endspecify endmodule module lut40014 ( input A, B, C, D, output Z ); ROM16X1 #(16'h33AB) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40015 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0F05) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_29 ( input D1, C1, B1, A1, D0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, DI0_dly, CLK_dly; lut40016 nRRAS_5_u_i( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40017 \IS_RNO[0] ( .A(A0), .B(B0), .C(GNDI), .D(D0), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \IS[0] ( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40016 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFF54) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40017 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEE11) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_30 ( input D1, B1, A1, D0, A0, DI1, DI0, CE, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, DI1_dly, CLK_dly, DI0_dly, CE_dly; lut40018 \IS_RNO[2] ( .A(A1), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40019 IS_n1_0_x2( .A(A0), .B(GNDI), .C(GNDI), .D(D0), .Z(F0)); vmuxregsre \IS[2] ( .D0(VCCI), .D1(DI1_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre \IS[1] ( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI1, 0:0:0, 0:0:0,,,, CLK_dly, DI1_dly); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40018 ( input A, B, C, D, output Z ); ROM16X1 #(16'h66AA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40019 ( input A, B, C, D, output Z ); ROM16X1 #(16'h55AA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_31 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CE, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, CE_dly; lut40020 RA10_RNO( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40021 \IS_RNO[3] ( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \IS[3] ( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40020 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFFFD) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40021 ( input A, B, C, D, output Z ); ROM16X1 #(16'h6AAA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_32 ( input D1, C1, B1, A1, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, DI0_dly, CLK_dly; lut40022 UFMSDI_ens2_i_a0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40023 InitReady_RNO( .A(A0), .B(B0), .C(GNDI), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre InitReady( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40022 ( input A, B, C, D, output Z ); ROM16X1 #(16'h5155) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40023 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEEEE) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_33 ( input D1, C1, A1, D0, C0, A0, DI0, CE, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, DI0_dly, CLK_dly, CE_dly; lut40024 LED_pad_RNO( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40025 LEDEN_5_i_m2( .A(A0), .B(GNDI), .C(C0), .D(D0), .Z(F0)); vmuxregsre LEDEN( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40024 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFFAF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40025 ( input A, B, C, D, output Z ); ROM16X1 #(16'hA0AF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_39 ( input D1, A1, D0, C0, A0, DI0, LSR, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, LSR_NOTIN, DI0_dly, CLK_dly, LSR_dly; lut40026 XOR8MEG_3_u_0_a3_0( .A(A1), .B(GNDI), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40027 RA11_2( .A(A0), .B(GNDI), .C(C0), .D(D0), .Z(F0)); vmuxregsre0007 RA11( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(LSR_NOTIN), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40026 ( input A, B, C, D, output Z ); ROM16X1 #(16'h00AA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40027 ( input A, B, C, D, output Z ); ROM16X1 #(16'hA5AA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_41 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, M1_dly; lut40028 RCKEEN_8_u_1_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40029 RCKEEN_8_u( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre PHI2r2( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre RCKEEN( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40028 ( input A, B, C, D, output Z ); ROM16X1 #(16'h2DAD) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40029 ( input A, B, C, D, output Z ); ROM16X1 #(16'hCCEC) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_42 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, M1_dly; lut40030 nRWE_RNO_5( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40031 RCKE_2_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre PHI2r( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre RCKE( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40030 ( input A, B, C, D, output Z ); ROM16X1 #(16'h1000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40031 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFE50) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_43 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, M1_dly; lut40032 RCKEEN_8_u_RNO( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40033 Ready_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre PHI2r3( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre Ready( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40032 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3704) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40033 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF2F0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_44 ( input D1, C1, B1, A1, C0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire GNDI, M1_NOTIN, VCCI, DI0_dly, CLK_dly, M1_dly; lut40034 Ready_0_sqmuxa_0_a3( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40013 Ready_fast_RNO( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre RASr( .D0(M1_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); inverter M1_INVERTERIN( .I(M1_dly), .Z(M1_NOTIN)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre Ready_fast( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40034 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0040) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_50 ( input D1, C1, B1, C0, A0, DI0, LSR, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, LSR_NOTIN, DI0_dly, CLK_dly, LSR_dly; lut40035 nRowColSel_RNO( .A(GNDI), .B(B1), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40013 \S_0_i_o2[1] ( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); vmuxregsre0007 \S[1] ( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(LSR_NOTIN), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40035 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0300) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_51 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, M1_dly; lut40036 UFMCLK_RNO_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40037 UFMCLK_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre RASr2( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre UFMCLK( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40036 ( input A, B, C, D, output Z ); ROM16X1 #(16'hABEF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40037 ( input A, B, C, D, output Z ); ROM16X1 #(16'h1302) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_52 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, M1, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, DI0_dly, CLK_dly, M1_dly; lut40038 PHI2r3_RNITCN41( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40039 UFMSDI_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre RASr3( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre UFMSDI( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40038 ( input A, B, C, D, output Z ); ROM16X1 #(16'h33B3) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40039 ( input A, B, C, D, output Z ); ROM16X1 #(16'h5404) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_55 ( input D0, B0, A0, M1, M0, CLK, output F0, Q0, Q1 ); wire GNDI, VCCI, CLK_NOTIN, M1_dly, CLK_dly, M0_dly; lut40040 \un9_RA[4] ( .A(A0), .B(B0), .C(GNDI), .D(D0), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \WRD[5] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre \WRD[4] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); specify (D0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40040 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEE22) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_56 ( input D1, C1, B1, A1, D0, C0, B0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, M1_dly, CLK_dly, M0_dly; lut40041 C1WR_0_a2_0_11( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40042 UFMSDI_ens2_i_o2( .A(GNDI), .B(B0), .C(C0), .D(D0), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \WRD[7] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre \WRD[6] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40041 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40042 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3C0C) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_57 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CE, CLK, output F0, Q0, F1 ); wire VCCI, CLK_NOTIN, GNDI, DI0_dly, CLK_dly, CE_dly; lut40043 XOR8MEG_3_u_0_a3_2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40044 XOR8MEG_3_u_0_a3_3( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre XOR8MEG( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (negedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); endspecify endmodule module lut40043 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40044 ( input A, B, C, D, output Z ); ROM16X1 #(16'hBAFA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_58 ( input D1, C1, A1, D0, C0, B0, DI0, CE, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, DI0_dly, CLK_dly, CE_dly; lut40045 UFMSDI_en_ss0_0_a2_0( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40046 n8MEGEN_5_i_m2( .A(GNDI), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre n8MEGEN( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(CE_dly), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40045 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0005) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40046 ( input A, B, C, D, output Z ); ROM16X1 #(16'hC0CF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_59 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly; lut40047 un1_nRCAS_6_sqmuxa_i_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40048 nRCAS_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0049 nRCAS( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40047 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3F1D) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40048 ( input A, B, C, D, output Z ); ROM16X1 #(16'h5510) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module vmuxregsre0049 ( input D0, D1, SD, SP, CK, LSR, output Q ); FL1P3BX INST01( .D0(D0), .D1(D1), .SP(SP), .CK(CK), .SD(SD), .PD(LSR), .Q(Q)); defparam INST01.GSR = "DISABLED"; endmodule module SLICE_60 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly; lut40050 nRCS_RNO_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40051 nRCS_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0049 nRCS( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40050 ( input A, B, C, D, output Z ); ROM16X1 #(16'hBFF0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40051 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3233) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_61 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly; lut40052 nRRAS_5_u_i_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40053 nRRAS_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0049 nRRAS( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40052 ( input A, B, C, D, output Z ); ROM16X1 #(16'h00C8) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40053 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3031) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_62 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly; lut40054 nRCAS_0_sqmuxa_1_0_a3( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40055 nRWE_RNO( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0049 nRWE( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40054 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0800) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40055 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF2F7) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_63 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, LSR, CLK, output F0, Q0, F1 ); wire VCCI, DI0_dly, CLK_dly, LSR_dly; lut40056 nRowColSel_0_0_a3_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40057 nRowColSel_0_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0007 nRowColSel( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(LSR_dly), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $setuphold (posedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40056 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0400) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40057 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF4F8) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_64 ( input D1, C1, B1, A1, D0, C0, B0, A0, DI0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, DI0_dly, CLK_dly; lut40058 nUFMCS15_0_a2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40059 nUFMCS_s_0_N_5_i( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0049 nUFMCS( .D0(VCCI), .D1(DI0_dly), .SD(VCCI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, DI0, 0:0:0, 0:0:0,,,, CLK_dly, DI0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40058 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0001) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40059 ( input A, B, C, D, output Z ); ROM16X1 #(16'hDDFC) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module nRWE_RNO_1_SLICE_65 ( input D1, C1, B1, A1, D0, C0, B0, A0, M0, output OFX0 ); wire \nRWE_RNO_1/SLICE_65/nRWE_RNO_1/SLICE_65_K1_H1 , \nRWE_RNO_1/SLICE_65/nRWE_RNO_1/GATE_H0 ; lut40060 \nRWE_RNO_1/SLICE_65_K1 ( .A(A1), .B(B1), .C(C1), .D(D1), .Z(\nRWE_RNO_1/SLICE_65/nRWE_RNO_1/SLICE_65_K1_H1 )); lut40061 \nRWE_RNO_1/GATE ( .A(A0), .B(B0), .C(C0), .D(D0), .Z(\nRWE_RNO_1/SLICE_65/nRWE_RNO_1/GATE_H0 )); selmux2 \nRWE_RNO_1/SLICE_65_K0K1MUX ( .D0(\nRWE_RNO_1/SLICE_65/nRWE_RNO_1/GATE_H0 ), .D1(\nRWE_RNO_1/SLICE_65/nRWE_RNO_1/SLICE_65_K1_H1 ), .SD(M0), .Z(OFX0)); specify (D1 => OFX0) = (0:0:0,0:0:0); (C1 => OFX0) = (0:0:0,0:0:0); (B1 => OFX0) = (0:0:0,0:0:0); (A1 => OFX0) = (0:0:0,0:0:0); (D0 => OFX0) = (0:0:0,0:0:0); (C0 => OFX0) = (0:0:0,0:0:0); (B0 => OFX0) = (0:0:0,0:0:0); (A0 => OFX0) = (0:0:0,0:0:0); (M0 => OFX0) = (0:0:0,0:0:0); endspecify endmodule module lut40060 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0002) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40061 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0200) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_66 ( input D1, C1, B1, D0, C0, B0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40062 nUFMCS_s_0_N_5_i_N_2L1( .A(GNDI), .B(B1), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40063 UFMCLK_r_i_a2_2_2( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0007 \RowA[1] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RowA[0] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40062 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0F03) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40063 ( input A, B, C, D, output Z ); ROM16X1 #(16'h2000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_67 ( input D1, C1, B1, A1, D0, C0, B0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40064 CmdUFMCLK_1_sqmuxa_0_a2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40065 XOR8MEG18_0_a2( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0066 \RowA[5] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RowA[4] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40064 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0008) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40065 ( input A, B, C, D, output Z ); ROM16X1 #(16'h2000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module vmuxregsre0066 ( input D0, D1, SD, SP, CK, LSR, output Q ); FL1P3JY INST01( .D0(D0), .D1(D1), .SP(SP), .CK(CK), .SD(SD), .PD(LSR), .Q(Q)); defparam INST01.GSR = "DISABLED"; endmodule module SLICE_68 ( input D1, C1, B1, A1, D0, C0, B0, A0, output F0, F1 ); lut40067 un1_FS_14_i_a2_0_1( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40068 un1_FS_14_i_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40067 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0001) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40068 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF8F0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_69 ( input D1, C1, B1, A1, D0, C0, B0, A0, output F0, F1 ); lut40069 un1_FS_13_i_a2_1( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40070 un1_FS_13_i_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40069 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0004) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40070 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF8F0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_70 ( input D1, C1, B1, A1, C0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, M1_dly, CLK_dly, M0_dly; lut40071 C1WR_0_a2_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40072 C1WR_0_a2( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \Bank[1] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre \Bank[0] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40071 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40072 ( input A, B, C, D, output Z ); ROM16X1 #(16'hA0A0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_71 ( input D1, C1, B1, A1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, M1_dly, CLK_dly, M0_dly; lut40073 C1WR_0_a2_0_4( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40074 C1WR_0_a2_0_10( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \Bank[3] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre \Bank[2] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40073 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40074 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_72 ( input D1, C1, A1, D0, C0, B0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40075 UFMSDI_ens2_i_o2_0( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40076 UFMCLK_r_i_m2( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0007 \RowA[3] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RowA[2] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40075 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFFFA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40076 ( input A, B, C, D, output Z ); ROM16X1 #(16'hACA0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_73 ( input D1, C1, B1, A1, C0, A0, M1, M0, CE, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, M1_dly, CLK_dly, M0_dly, CE_dly; lut40077 IS_0_sqmuxa_0_o2_0( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40013 IS_0_sqmuxa_0_o2( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); gnd DRIVEGND( .PWR0(GNDI)); vmuxregsre CmdUFMCS( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre CmdUFMCLK( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); endspecify endmodule module lut40077 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFBFF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_74 ( input B1, A1, D0, C0, B0, A0, M0, CE, CLK, output F0, Q0, F1 ); wire GNDI, VCCI, CLK_NOTIN, M0_dly, CLK_dly, CE_dly; lut40078 InitReady3_0_a2_3( .A(A1), .B(B1), .C(GNDI), .D(GNDI), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40079 InitReady3_0_a2( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre CmdUFMSDI( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(CE_dly), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); specify (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, CE, 0:0:0, 0:0:0,,,, CLK_dly, CE_dly); endspecify endmodule module lut40078 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8888) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40079 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_75 ( input D1, B1, A1, D0, C0, B0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, M0_NOTIN, M1_dly, CLK_dly, M0_dly; lut40080 Cmdn8MEGEN_4_u_i_o2_0( .A(A1), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40081 CmdLEDEN_4_u_i_a2_0( .A(GNDI), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre CASr2( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre CASr( .D0(M0_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); inverter M0_INVERTERIN( .I(M0_dly), .Z(M0_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40080 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFFDD) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40081 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0003) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_76 ( input D1, B1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, M1_dly, CLK_dly, M0_dly; lut40082 CmdEnable16_0_a2_4( .A(GNDI), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40083 CmdEnable16_0_a2_4_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \Bank[5] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre \Bank[4] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40082 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3300) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40083 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0010) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_77 ( input D1, A1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, M1_dly, CLK_dly, M0_dly; lut40084 CmdEnable16_0_a2_1( .A(A1), .B(GNDI), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40085 CmdEnable16_0_a2_5( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \Bank[7] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); vmuxregsre \Bank[6] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $setuphold (posedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40084 ( input A, B, C, D, output Z ); ROM16X1 #(16'h00AA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40085 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_78 ( input D1, B1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, M1_NOTIN, VCCI, CLK_NOTIN, M0_NOTIN, M1_dly, CLK_dly, M0_dly; lut40086 CmdEnable17_0_o2( .A(GNDI), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40087 CmdEnable17_0_a2_4( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre CBR_fast( .D0(M1_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); inverter M1_INVERTERIN( .I(M1_dly), .Z(M1_NOTIN)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre CBR( .D0(M0_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); inverter M0_INVERTERIN( .I(M0_dly), .Z(M0_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40086 ( input A, B, C, D, output Z ); ROM16X1 #(16'h33FF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40087 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0200) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_79 ( input D1, B1, A1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, M1_dly, CLK_dly, M0_dly; lut40088 nRWE_RNO_2( .A(A1), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40089 nRWE_RNO_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \WRD[1] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre \WRD[0] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40088 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0088) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40089 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_80 ( input D1, B1, D0, C0, B0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40082 nRCAS_RNO_1( .A(GNDI), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40090 nRCAS_RNO_0( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre0066 \RowA[9] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RowA[8] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40090 ( input A, B, C, D, output Z ); ROM16X1 #(16'h4005) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_81 ( input D1, C1, B1, A1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire M1_NOTIN, VCCI, GNDI, CLK_NOTIN, M0_NOTIN, M1_dly, CLK_dly, M0_dly; lut40091 UFMSDI_ens2_i_o2_0_3( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40092 InitReady3_0_a2_5( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre FWEr_fast( .D0(M1_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); inverter M1_INVERTERIN( .I(M1_dly), .Z(M1_NOTIN)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre FWEr( .D0(M0_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); inverter M0_INVERTERIN( .I(M0_dly), .Z(M0_NOTIN)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40091 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFFFE) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40092 ( input A, B, C, D, output Z ); ROM16X1 #(16'h8000) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_82 ( input D1, C1, B1, A1, D0, C0, B0, A0, M0, CLK, output F0, Q0, F1 ); wire VCCI, GNDI, M0_dly, CLK_dly; lut40093 CmdLEDEN_4_u_i_a2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40094 CmdSubmitted_1_sqmuxa_0_a2( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre CASr3( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(GNDI), .Q(Q0)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40093 ( input A, B, C, D, output Z ); ROM16X1 #(16'h3230) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40094 ( input A, B, C, D, output Z ); ROM16X1 #(16'h1300) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_83 ( input C1, B1, A1, C0, B0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40095 un1_nRCAS_6_sqmuxa_i_o2( .A(A1), .B(B1), .C(C1), .D(GNDI), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40096 Ready_0_sqmuxa_0_o2( .A(A0), .B(B0), .C(C0), .D(GNDI), .Z(F0)); vmuxregsre0007 \RBA[1] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RBA[0] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40095 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFEFE) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40096 ( input A, B, C, D, output Z ); ROM16X1 #(16'h7F7F) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_84 ( input D1, C1, B1, A1, D0, C0, B0, A0, output F0, F1 ); lut40097 UFMSDI_ens2_i_a2_4_2( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40098 un1_FS_13_i_a2_6( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40097 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0400) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40098 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0010) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_85 ( input D1, C1, B1, A1, D0, C0, B0, A0, M1, M0, CLK, output F0, Q0, F1, Q1 ); wire VCCI, GNDI, CLK_NOTIN, M1_dly, CLK_dly, M0_dly; lut40099 CmdEnable17_0_a2_3( .A(A1), .B(B1), .C(C1), .D(D1), .Z(F1)); lut40100 un1_Din_4( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); vmuxregsre \WRD[3] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); gnd DRIVEGND( .PWR0(GNDI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); vmuxregsre \WRD[2] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(GNDI), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); endspecify endmodule module lut40099 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0020) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40100 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0001) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_86 ( input D1, A1, D0, C0, A0, output F0, F1 ); wire GNDI; lut40101 RDQML( .A(A1), .B(GNDI), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40102 \un9_RA[9] ( .A(A0), .B(GNDI), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40101 ( input A, B, C, D, output Z ); ROM16X1 #(16'h55FF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40102 ( input A, B, C, D, output Z ); ROM16X1 #(16'hAAF0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_87 ( input D1, B1, A1, D0, C0, B0, A0, output F0, F1 ); wire GNDI; lut40103 UFMSDI_RNO_0( .A(A1), .B(B1), .C(GNDI), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40104 un1_FS_13_i_a2_8( .A(A0), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40103 ( input A, B, C, D, output Z ); ROM16X1 #(16'h00EE) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40104 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0800) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_88 ( input D1, C1, B1, C0, A0, M1, M0, LSR, CLK, output F0, Q0, F1, Q1 ); wire GNDI, VCCI, CLK_NOTIN, LSR_NOTIN, M1_dly, CLK_dly, M0_dly, LSR_dly; lut40105 C1WR_0_a2_0_3( .A(GNDI), .B(B1), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40106 nCCAS_pad_RNI01SJ( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); vmuxregsre0007 \RowA[7] ( .D0(M1_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q1)); vcc DRIVEVCC( .PWR1(VCCI)); inverter CLK_INVERTERIN( .I(CLK_dly), .Z(CLK_NOTIN)); inverter LSR_INVERTERIN( .I(LSR_dly), .Z(LSR_NOTIN)); vmuxregsre0007 \RowA[6] ( .D0(M0_dly), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_NOTIN), .LSR(LSR_NOTIN), .Q(Q0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); (CLK => Q1) = (0:0:0,0:0:0); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); $setuphold (negedge CLK, M1, 0:0:0, 0:0:0,,,, CLK_dly, M1_dly); $setuphold (negedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (negedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); endspecify endmodule module lut40105 ( input A, B, C, D, output Z ); ROM16X1 #(16'h0C00) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40106 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFAFA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_89 ( input D1, C1, D0, B0, A0, output F0, F1 ); wire GNDI; lut40107 RDQMH( .A(GNDI), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40108 \un9_RA[8] ( .A(A0), .B(B0), .C(GNDI), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40107 ( input A, B, C, D, output Z ); ROM16X1 #(16'hF0FF) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40108 ( input A, B, C, D, output Z ); ROM16X1 #(16'hCCAA) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_90 ( input D1, C1, B1, D0, B0, A0, output F0, F1 ); wire GNDI; lut40109 un1_CMDWR( .A(GNDI), .B(B1), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40110 \un9_RA[0] ( .A(A0), .B(B0), .C(GNDI), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40109 ( input A, B, C, D, output Z ); ROM16X1 #(16'hCCC0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40110 ( input A, B, C, D, output Z ); ROM16X1 #(16'hEE44) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_91 ( input D1, C1, A1, D0, C0, B0, output F0, F1 ); wire GNDI; lut40111 \un9_RA[7] ( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40112 \un9_RA[1] ( .A(GNDI), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40111 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFA0A) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40112 ( input A, B, C, D, output Z ); ROM16X1 #(16'hCFC0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_92 ( input D1, C1, A1, D0, C0, B0, output F0, F1 ); wire GNDI; lut40113 \un9_RA[6] ( .A(A1), .B(GNDI), .C(C1), .D(D1), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40114 \un9_RA[2] ( .A(GNDI), .B(B0), .C(C0), .D(D0), .Z(F0)); specify (D1 => F1) = (0:0:0,0:0:0); (C1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40113 ( input A, B, C, D, output Z ); ROM16X1 #(16'hAFA0) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module lut40114 ( input A, B, C, D, output Z ); ROM16X1 #(16'hFC0C) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_93 ( input C1, B1, A1, D0, B0, A0, output F0, F1 ); wire GNDI; lut40115 \un9_RA[5] ( .A(A1), .B(B1), .C(C1), .D(GNDI), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40040 \un9_RA[3] ( .A(A0), .B(B0), .C(GNDI), .D(D0), .Z(F0)); specify (C1 => F1) = (0:0:0,0:0:0); (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (D0 => F0) = (0:0:0,0:0:0); (B0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); endspecify endmodule module lut40115 ( input A, B, C, D, output Z ); ROM16X1 #(16'hE4E4) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module SLICE_94 ( input B1, A1, C0, A0, M0, LSR, CLK, output F0, Q0, F1 ); wire GNDI, M0_NOTIN, VCCI, M0_dly, CLK_dly, LSR_dly; lut40116 IS_0_sqmuxa_0_o2_0_RNIS63D( .A(A1), .B(B1), .C(GNDI), .D(GNDI), .Z(F1)); gnd DRIVEGND( .PWR0(GNDI)); lut40072 RCKEEN_8_u_0_a2_1_s( .A(A0), .B(GNDI), .C(C0), .D(GNDI), .Z(F0)); vmuxregsre0066 RA10( .D0(M0_NOTIN), .D1(VCCI), .SD(GNDI), .SP(VCCI), .CK(CLK_dly), .LSR(LSR_dly), .Q(Q0)); inverter M0_INVERTERIN( .I(M0_dly), .Z(M0_NOTIN)); vcc DRIVEVCC( .PWR1(VCCI)); specify (B1 => F1) = (0:0:0,0:0:0); (A1 => F1) = (0:0:0,0:0:0); (C0 => F0) = (0:0:0,0:0:0); (A0 => F0) = (0:0:0,0:0:0); (CLK => Q0) = (0:0:0,0:0:0); $setuphold (posedge CLK, M0, 0:0:0, 0:0:0,,,, CLK_dly, M0_dly); $setuphold (posedge CLK, LSR, 0:0:0, 0:0:0,,,, CLK_dly, LSR_dly); $width (posedge CLK, 0:0:0); $width (negedge CLK, 0:0:0); endspecify endmodule module lut40116 ( input A, B, C, D, output Z ); ROM16X1 #(16'h1111) INST10( .AD0(A), .AD1(B), .AD2(C), .AD3(D), .DO0(Z)); endmodule module RD_0_ ( output PADDI, input PADDT, PADDO, inout RD0 ); mjiobuf \RD_pad[0] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD0), .PADI(RD0)); specify (PADDT => RD0) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD0) = (0:0:0,0:0:0); (RD0 => PADDI) = (0:0:0,0:0:0); $width (posedge RD0, 0:0:0); $width (negedge RD0, 0:0:0); endspecify endmodule module mjiobuf ( input I, T, output Z, PAD, input PADI ); IB INST1( .I(PADI), .O(Z)); OBW INST2( .I(I), .T(T), .O(PAD)); endmodule module Dout_0_ ( input PADDO, output Dout0 ); mjiobuf0117 \Dout_pad[0] ( .I(PADDO), .PAD(Dout0)); specify (PADDO => Dout0) = (0:0:0,0:0:0); endspecify endmodule module mjiobuf0117 ( input I, output PAD ); OB INST5( .I(I), .O(PAD)); endmodule module PHI2 ( output PADDI, input PHI2 ); mjiobuf0118 PHI2_pad( .Z(PADDI), .PAD(PHI2)); specify (PHI2 => PADDI) = (0:0:0,0:0:0); $width (posedge PHI2, 0:0:0); $width (negedge PHI2, 0:0:0); endspecify endmodule module mjiobuf0118 ( output Z, input PAD ); IBPD INST1( .I(PAD), .O(Z)); endmodule module UFMSDO ( output PADDI, input UFMSDO ); mjiobuf0119 UFMSDO_pad( .Z(PADDI), .PAD(UFMSDO)); specify (UFMSDO => PADDI) = (0:0:0,0:0:0); $width (posedge UFMSDO, 0:0:0); $width (negedge UFMSDO, 0:0:0); endspecify endmodule module mjiobuf0119 ( output Z, input PAD ); IB INST1( .I(PAD), .O(Z)); endmodule module UFMSDI ( input PADDO, output UFMSDI ); mjiobuf0120 UFMSDI_pad( .I(PADDO), .PAD(UFMSDI)); specify (PADDO => UFMSDI) = (0:0:0,0:0:0); endspecify endmodule module mjiobuf0120 ( input I, output PAD ); OB INST5( .I(I), .O(PAD)); endmodule module UFMCLK ( input PADDO, output UFMCLK ); mjiobuf0120 UFMCLK_pad( .I(PADDO), .PAD(UFMCLK)); specify (PADDO => UFMCLK) = (0:0:0,0:0:0); endspecify endmodule module nUFMCS ( input PADDO, output nUFMCS ); mjiobuf0120 nUFMCS_pad( .I(PADDO), .PAD(nUFMCS)); specify (PADDO => nUFMCS) = (0:0:0,0:0:0); endspecify endmodule module RDQML ( input PADDO, output RDQML ); mjiobuf0120 RDQML_pad( .I(PADDO), .PAD(RDQML)); specify (PADDO => RDQML) = (0:0:0,0:0:0); endspecify endmodule module RDQMH ( input PADDO, output RDQMH ); mjiobuf0120 RDQMH_pad( .I(PADDO), .PAD(RDQMH)); specify (PADDO => RDQMH) = (0:0:0,0:0:0); endspecify endmodule module nRCAS ( input PADDO, output nRCAS ); mjiobuf0120 nRCAS_pad( .I(PADDO), .PAD(nRCAS)); specify (PADDO => nRCAS) = (0:0:0,0:0:0); endspecify endmodule module nRRAS ( input PADDO, output nRRAS ); mjiobuf0120 nRRAS_pad( .I(PADDO), .PAD(nRRAS)); specify (PADDO => nRRAS) = (0:0:0,0:0:0); endspecify endmodule module nRWE ( input PADDO, output nRWE ); mjiobuf0120 nRWE_pad( .I(PADDO), .PAD(nRWE)); specify (PADDO => nRWE) = (0:0:0,0:0:0); endspecify endmodule module RCKE ( input PADDO, output RCKE ); mjiobuf0120 RCKE_pad( .I(PADDO), .PAD(RCKE)); specify (PADDO => RCKE) = (0:0:0,0:0:0); endspecify endmodule module RCLK ( output PADDI, input RCLK ); mjiobuf0119 RCLK_pad( .Z(PADDI), .PAD(RCLK)); specify (RCLK => PADDI) = (0:0:0,0:0:0); $width (posedge RCLK, 0:0:0); $width (negedge RCLK, 0:0:0); endspecify endmodule module nRCS ( input PADDO, output nRCS ); mjiobuf0120 nRCS_pad( .I(PADDO), .PAD(nRCS)); specify (PADDO => nRCS) = (0:0:0,0:0:0); endspecify endmodule module RD_7_ ( output PADDI, input PADDT, PADDO, inout RD7 ); mjiobuf \RD_pad[7] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD7), .PADI(RD7)); specify (PADDT => RD7) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD7) = (0:0:0,0:0:0); (RD7 => PADDI) = (0:0:0,0:0:0); $width (posedge RD7, 0:0:0); $width (negedge RD7, 0:0:0); endspecify endmodule module RD_6_ ( output PADDI, input PADDT, PADDO, inout RD6 ); mjiobuf \RD_pad[6] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD6), .PADI(RD6)); specify (PADDT => RD6) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD6) = (0:0:0,0:0:0); (RD6 => PADDI) = (0:0:0,0:0:0); $width (posedge RD6, 0:0:0); $width (negedge RD6, 0:0:0); endspecify endmodule module RD_5_ ( output PADDI, input PADDT, PADDO, inout RD5 ); mjiobuf \RD_pad[5] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD5), .PADI(RD5)); specify (PADDT => RD5) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD5) = (0:0:0,0:0:0); (RD5 => PADDI) = (0:0:0,0:0:0); $width (posedge RD5, 0:0:0); $width (negedge RD5, 0:0:0); endspecify endmodule module RD_4_ ( output PADDI, input PADDT, PADDO, inout RD4 ); mjiobuf \RD_pad[4] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD4), .PADI(RD4)); specify (PADDT => RD4) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD4) = (0:0:0,0:0:0); (RD4 => PADDI) = (0:0:0,0:0:0); $width (posedge RD4, 0:0:0); $width (negedge RD4, 0:0:0); endspecify endmodule module RD_3_ ( output PADDI, input PADDT, PADDO, inout RD3 ); mjiobuf \RD_pad[3] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD3), .PADI(RD3)); specify (PADDT => RD3) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD3) = (0:0:0,0:0:0); (RD3 => PADDI) = (0:0:0,0:0:0); $width (posedge RD3, 0:0:0); $width (negedge RD3, 0:0:0); endspecify endmodule module RD_2_ ( output PADDI, input PADDT, PADDO, inout RD2 ); mjiobuf \RD_pad[2] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD2), .PADI(RD2)); specify (PADDT => RD2) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD2) = (0:0:0,0:0:0); (RD2 => PADDI) = (0:0:0,0:0:0); $width (posedge RD2, 0:0:0); $width (negedge RD2, 0:0:0); endspecify endmodule module RD_1_ ( output PADDI, input PADDT, PADDO, inout RD1 ); mjiobuf \RD_pad[1] ( .I(PADDO), .T(PADDT), .Z(PADDI), .PAD(RD1), .PADI(RD1)); specify (PADDT => RD1) = (0:0:0,0:0:0,0:0:0,0:0:0,0:0:0,0:0:0); (PADDO => RD1) = (0:0:0,0:0:0); (RD1 => PADDI) = (0:0:0,0:0:0); $width (posedge RD1, 0:0:0); $width (negedge RD1, 0:0:0); endspecify endmodule module RA_11_ ( input PADDO, output RA11 ); mjiobuf0120 \RA_pad[11] ( .I(PADDO), .PAD(RA11)); specify (PADDO => RA11) = (0:0:0,0:0:0); endspecify endmodule module RA_10_ ( input PADDO, output RA10 ); mjiobuf0120 \RA_pad[10] ( .I(PADDO), .PAD(RA10)); specify (PADDO => RA10) = (0:0:0,0:0:0); endspecify endmodule module RA_9_ ( input PADDO, output RA9 ); mjiobuf0120 \RA_pad[9] ( .I(PADDO), .PAD(RA9)); specify (PADDO => RA9) = (0:0:0,0:0:0); endspecify endmodule module RA_8_ ( input PADDO, output RA8 ); mjiobuf0120 \RA_pad[8] ( .I(PADDO), .PAD(RA8)); specify (PADDO => RA8) = (0:0:0,0:0:0); endspecify endmodule module RA_7_ ( input PADDO, output RA7 ); mjiobuf0120 \RA_pad[7] ( .I(PADDO), .PAD(RA7)); specify (PADDO => RA7) = (0:0:0,0:0:0); endspecify endmodule module RA_6_ ( input PADDO, output RA6 ); mjiobuf0120 \RA_pad[6] ( .I(PADDO), .PAD(RA6)); specify (PADDO => RA6) = (0:0:0,0:0:0); endspecify endmodule module RA_5_ ( input PADDO, output RA5 ); mjiobuf0120 \RA_pad[5] ( .I(PADDO), .PAD(RA5)); specify (PADDO => RA5) = (0:0:0,0:0:0); endspecify endmodule module RA_4_ ( input PADDO, output RA4 ); mjiobuf0120 \RA_pad[4] ( .I(PADDO), .PAD(RA4)); specify (PADDO => RA4) = (0:0:0,0:0:0); endspecify endmodule module RA_3_ ( input PADDO, output RA3 ); mjiobuf0120 \RA_pad[3] ( .I(PADDO), .PAD(RA3)); specify (PADDO => RA3) = (0:0:0,0:0:0); endspecify endmodule module RA_2_ ( input PADDO, output RA2 ); mjiobuf0120 \RA_pad[2] ( .I(PADDO), .PAD(RA2)); specify (PADDO => RA2) = (0:0:0,0:0:0); endspecify endmodule module RA_1_ ( input PADDO, output RA1 ); mjiobuf0120 \RA_pad[1] ( .I(PADDO), .PAD(RA1)); specify (PADDO => RA1) = (0:0:0,0:0:0); endspecify endmodule module RA_0_ ( input PADDO, output RA0 ); mjiobuf0120 \RA_pad[0] ( .I(PADDO), .PAD(RA0)); specify (PADDO => RA0) = (0:0:0,0:0:0); endspecify endmodule module RBA_1_ ( input PADDO, output RBA1 ); mjiobuf0120 \RBA_pad[1] ( .I(PADDO), .PAD(RBA1)); specify (PADDO => RBA1) = (0:0:0,0:0:0); endspecify endmodule module RBA_0_ ( input PADDO, output RBA0 ); mjiobuf0120 \RBA_pad[0] ( .I(PADDO), .PAD(RBA0)); specify (PADDO => RBA0) = (0:0:0,0:0:0); endspecify endmodule module LED ( input PADDO, output LED ); mjiobuf0121 LED_pad( .I(PADDO), .PAD(LED)); specify (PADDO => LED) = (0:0:0,0:0:0); endspecify endmodule module mjiobuf0121 ( input I, output PAD ); OB INST5( .I(I), .O(PAD)); endmodule module nFWE ( output PADDI, input nFWE ); mjiobuf0119 nFWE_pad( .Z(PADDI), .PAD(nFWE)); specify (nFWE => PADDI) = (0:0:0,0:0:0); $width (posedge nFWE, 0:0:0); $width (negedge nFWE, 0:0:0); endspecify endmodule module nCRAS ( output PADDI, input nCRAS ); mjiobuf0122 nCRAS_pad( .Z(PADDI), .PAD(nCRAS)); specify (nCRAS => PADDI) = (0:0:0,0:0:0); $width (posedge nCRAS, 0:0:0); $width (negedge nCRAS, 0:0:0); endspecify endmodule module mjiobuf0122 ( output Z, input PAD ); IBPU INST1( .I(PAD), .O(Z)); endmodule module nCCAS ( output PADDI, input nCCAS ); mjiobuf0122 nCCAS_pad( .Z(PADDI), .PAD(nCCAS)); specify (nCCAS => PADDI) = (0:0:0,0:0:0); $width (posedge nCCAS, 0:0:0); $width (negedge nCCAS, 0:0:0); endspecify endmodule module Dout_7_ ( input PADDO, output Dout7 ); mjiobuf0117 \Dout_pad[7] ( .I(PADDO), .PAD(Dout7)); specify (PADDO => Dout7) = (0:0:0,0:0:0); endspecify endmodule module Dout_6_ ( input PADDO, output Dout6 ); mjiobuf0117 \Dout_pad[6] ( .I(PADDO), .PAD(Dout6)); specify (PADDO => Dout6) = (0:0:0,0:0:0); endspecify endmodule module Dout_5_ ( input PADDO, output Dout5 ); mjiobuf0117 \Dout_pad[5] ( .I(PADDO), .PAD(Dout5)); specify (PADDO => Dout5) = (0:0:0,0:0:0); endspecify endmodule module Dout_4_ ( input PADDO, output Dout4 ); mjiobuf0117 \Dout_pad[4] ( .I(PADDO), .PAD(Dout4)); specify (PADDO => Dout4) = (0:0:0,0:0:0); endspecify endmodule module Dout_3_ ( input PADDO, output Dout3 ); mjiobuf0117 \Dout_pad[3] ( .I(PADDO), .PAD(Dout3)); specify (PADDO => Dout3) = (0:0:0,0:0:0); endspecify endmodule module Dout_2_ ( input PADDO, output Dout2 ); mjiobuf0117 \Dout_pad[2] ( .I(PADDO), .PAD(Dout2)); specify (PADDO => Dout2) = (0:0:0,0:0:0); endspecify endmodule module Dout_1_ ( input PADDO, output Dout1 ); mjiobuf0117 \Dout_pad[1] ( .I(PADDO), .PAD(Dout1)); specify (PADDO => Dout1) = (0:0:0,0:0:0); endspecify endmodule module Din_7_ ( output PADDI, input Din7 ); mjiobuf0119 \Din_pad[7] ( .Z(PADDI), .PAD(Din7)); specify (Din7 => PADDI) = (0:0:0,0:0:0); $width (posedge Din7, 0:0:0); $width (negedge Din7, 0:0:0); endspecify endmodule module Din_6_ ( output PADDI, input Din6 ); mjiobuf0119 \Din_pad[6] ( .Z(PADDI), .PAD(Din6)); specify (Din6 => PADDI) = (0:0:0,0:0:0); $width (posedge Din6, 0:0:0); $width (negedge Din6, 0:0:0); endspecify endmodule module Din_5_ ( output PADDI, input Din5 ); mjiobuf0119 \Din_pad[5] ( .Z(PADDI), .PAD(Din5)); specify (Din5 => PADDI) = (0:0:0,0:0:0); $width (posedge Din5, 0:0:0); $width (negedge Din5, 0:0:0); endspecify endmodule module Din_4_ ( output PADDI, input Din4 ); mjiobuf0119 \Din_pad[4] ( .Z(PADDI), .PAD(Din4)); specify (Din4 => PADDI) = (0:0:0,0:0:0); $width (posedge Din4, 0:0:0); $width (negedge Din4, 0:0:0); endspecify endmodule module Din_3_ ( output PADDI, input Din3 ); mjiobuf0119 \Din_pad[3] ( .Z(PADDI), .PAD(Din3)); specify (Din3 => PADDI) = (0:0:0,0:0:0); $width (posedge Din3, 0:0:0); $width (negedge Din3, 0:0:0); endspecify endmodule module Din_2_ ( output PADDI, input Din2 ); mjiobuf0119 \Din_pad[2] ( .Z(PADDI), .PAD(Din2)); specify (Din2 => PADDI) = (0:0:0,0:0:0); $width (posedge Din2, 0:0:0); $width (negedge Din2, 0:0:0); endspecify endmodule module Din_1_ ( output PADDI, input Din1 ); mjiobuf0119 \Din_pad[1] ( .Z(PADDI), .PAD(Din1)); specify (Din1 => PADDI) = (0:0:0,0:0:0); $width (posedge Din1, 0:0:0); $width (negedge Din1, 0:0:0); endspecify endmodule module Din_0_ ( output PADDI, input Din0 ); mjiobuf0119 \Din_pad[0] ( .Z(PADDI), .PAD(Din0)); specify (Din0 => PADDI) = (0:0:0,0:0:0); $width (posedge Din0, 0:0:0); $width (negedge Din0, 0:0:0); endspecify endmodule module CROW_1_ ( output PADDI, input CROW1 ); mjiobuf0119 \CROW_pad[1] ( .Z(PADDI), .PAD(CROW1)); specify (CROW1 => PADDI) = (0:0:0,0:0:0); $width (posedge CROW1, 0:0:0); $width (negedge CROW1, 0:0:0); endspecify endmodule module CROW_0_ ( output PADDI, input CROW0 ); mjiobuf0119 \CROW_pad[0] ( .Z(PADDI), .PAD(CROW0)); specify (CROW0 => PADDI) = (0:0:0,0:0:0); $width (posedge CROW0, 0:0:0); $width (negedge CROW0, 0:0:0); endspecify endmodule module MAin_9_ ( output PADDI, input MAin9 ); mjiobuf0119 \MAin_pad[9] ( .Z(PADDI), .PAD(MAin9)); specify (MAin9 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin9, 0:0:0); $width (negedge MAin9, 0:0:0); endspecify endmodule module MAin_8_ ( output PADDI, input MAin8 ); mjiobuf0119 \MAin_pad[8] ( .Z(PADDI), .PAD(MAin8)); specify (MAin8 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin8, 0:0:0); $width (negedge MAin8, 0:0:0); endspecify endmodule module MAin_7_ ( output PADDI, input MAin7 ); mjiobuf0119 \MAin_pad[7] ( .Z(PADDI), .PAD(MAin7)); specify (MAin7 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin7, 0:0:0); $width (negedge MAin7, 0:0:0); endspecify endmodule module MAin_6_ ( output PADDI, input MAin6 ); mjiobuf0119 \MAin_pad[6] ( .Z(PADDI), .PAD(MAin6)); specify (MAin6 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin6, 0:0:0); $width (negedge MAin6, 0:0:0); endspecify endmodule module MAin_5_ ( output PADDI, input MAin5 ); mjiobuf0119 \MAin_pad[5] ( .Z(PADDI), .PAD(MAin5)); specify (MAin5 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin5, 0:0:0); $width (negedge MAin5, 0:0:0); endspecify endmodule module MAin_4_ ( output PADDI, input MAin4 ); mjiobuf0119 \MAin_pad[4] ( .Z(PADDI), .PAD(MAin4)); specify (MAin4 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin4, 0:0:0); $width (negedge MAin4, 0:0:0); endspecify endmodule module MAin_3_ ( output PADDI, input MAin3 ); mjiobuf0119 \MAin_pad[3] ( .Z(PADDI), .PAD(MAin3)); specify (MAin3 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin3, 0:0:0); $width (negedge MAin3, 0:0:0); endspecify endmodule module MAin_2_ ( output PADDI, input MAin2 ); mjiobuf0119 \MAin_pad[2] ( .Z(PADDI), .PAD(MAin2)); specify (MAin2 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin2, 0:0:0); $width (negedge MAin2, 0:0:0); endspecify endmodule module MAin_1_ ( output PADDI, input MAin1 ); mjiobuf0119 \MAin_pad[1] ( .Z(PADDI), .PAD(MAin1)); specify (MAin1 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin1, 0:0:0); $width (negedge MAin1, 0:0:0); endspecify endmodule module MAin_0_ ( output PADDI, input MAin0 ); mjiobuf0119 \MAin_pad[0] ( .Z(PADDI), .PAD(MAin0)); specify (MAin0 => PADDI) = (0:0:0,0:0:0); $width (posedge MAin0, 0:0:0); $width (negedge MAin0, 0:0:0); endspecify endmodule