PAR: Place And Route Diamond (64-bit) 3.12.0.240.2.
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp.   All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc.  All rights reserved.
Copyright (c) 2001 Agere Systems   All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation,  All rights reserved.
Mon Aug 16 21:32:27 2021

C:/lscc/diamond/3.12/ispfpga\bin\nt64\par -f RAM2GS_LCMXO256C_impl1.p2t
RAM2GS_LCMXO256C_impl1_map.ncd RAM2GS_LCMXO256C_impl1.dir
RAM2GS_LCMXO256C_impl1.prf -gui -msgset
C:/Users/Dog/Documents/GitHub/RAM2GS/CPLD/LCMXO/LCMXO256C/promote.xml


Preference file: RAM2GS_LCMXO256C_impl1.prf.

Cost Table Summary
Level/       Number       Worst        Timing       Worst        Timing       Run          NCD
Cost [ncd]   Unrouted     Slack        Score        Slack(hold)  Score(hold)  Time         Status
----------   --------     -----        ------       -----------  -----------  ----         ------
5_1   *      0            2.023        0            0.339        0            07           Completed
* : Design saved.

Total (real) run time for 1-seed: 7 secs 

par done!

Note: user must run 'Trace' for timing closure signoff.

Lattice Place and Route Report for Design "RAM2GS_LCMXO256C_impl1_map.ncd"
Mon Aug 16 21:32:27 2021


Best Par Run
PAR: Place And Route Diamond (64-bit) 3.12.0.240.2.
Command Line: par -w -l 5 -i 6 -t 1 -c 0 -e 0 -gui -msgset C:/Users/Dog/Documents/GitHub/RAM2GS/CPLD/LCMXO/LCMXO256C/promote.xml -exp parUseNBR=1:parCDP=0:parCDR=0:parPathBased=OFF:parASE=1 RAM2GS_LCMXO256C_impl1_map.ncd RAM2GS_LCMXO256C_impl1.dir/5_1.ncd RAM2GS_LCMXO256C_impl1.prf
Preference file: RAM2GS_LCMXO256C_impl1.prf.
Placement level-cost: 5-1.
Routing Iterations: 6

Loading design for application par from file RAM2GS_LCMXO256C_impl1_map.ncd.
Design name: RAM2GS
NCD version: 3.3
Vendor:      LATTICE
Device:      LCMXO256C
Package:     TQFP100
Performance: 3
Loading device for application par from file 'mj5g10x6.nph' in environment: C:/lscc/diamond/3.12/ispfpga.
Package Status:                     Final          Version 1.19.
Performance Hardware Data Status: Version 1.124.
License checked out.


Ignore Preference Error(s):  True

Device utilization summary:

   PIO (prelim)      67/79           84% used
                     67/78           85% bonded
   SLICE             65/128          50% used



Number of Signals: 252
Number of Connections: 618

Pin Constraint Summary:
   67 out of 67 pins locked (100% locked).

The following 4 signals are selected to use the primary clock routing resources:
    RCLK_c (driver: RCLK, clk load #: 39)
    PHI2_c (driver: PHI2, clk load #: 13)
    nCCAS_c (driver: nCCAS, clk load #: 4)
    nCRAS_c (driver: nCRAS, clk load #: 7)

No signal is selected as secondary clock.

No signal is selected as Global Set/Reset.
Starting Placer Phase 0.
........
Finished Placer Phase 0.  REAL time: 0 secs 

Starting Placer Phase 1.
...............
Placer score = 586066.
Finished Placer Phase 1.  REAL time: 6 secs 

Starting Placer Phase 2.
.
Placer score =  584668
Finished Placer Phase 2.  REAL time: 6 secs 



Clock Report

Global Clock Resources:
  CLK_PIN    : 1 out of 4 (25%)
  General PIO: 3 out of 80 (3%)

Global Clocks:
  PRIMARY "RCLK_c" from comp "RCLK" on CLK_PIN site "86 (PT4A)", clk load = 39
  PRIMARY "PHI2_c" from comp "PHI2" on PIO site "39 (PB3D)", clk load = 13
  PRIMARY "nCCAS_c" from comp "nCCAS" on PIO site "27 (PL9B)", clk load = 4
  PRIMARY "nCRAS_c" from comp "nCRAS" on PIO site "43 (PB4A)", clk load = 7

  PRIMARY  : 4 out of 4 (100%)
  SECONDARY: 0 out of 4 (0%)




I/O Usage Summary (final):
   67 out of 79 (84.8%) PIO sites used.
   67 out of 78 (85.9%) bonded PIO sites used.
   Number of PIO comps: 67; differential: 0.
   Number of Vref pins used: 0.

I/O Bank Usage Summary:
+----------+----------------+------------+------------+------------+
| I/O Bank | Usage          | Bank Vccio | Bank Vref1 | Bank Vref2 |
+----------+----------------+------------+------------+------------+
| 0        | 36 / 41 ( 87%) | 3.3V       | -          | -          |
| 1        | 31 / 37 ( 83%) | 3.3V       | -          | -          |
+----------+----------------+------------+------------+------------+

Total placer CPU time: 6 secs 

Dumping design to file RAM2GS_LCMXO256C_impl1.dir/5_1.ncd.

0 connections routed; 618 unrouted.
Starting router resource preassignment
WARNING - par: The driver of primary clock net PHI2_c is not placed on one of the PIO sites dedicated for primary clocks.  This primary clock will be routed to a H-spine through general routing resource and may suffer from excessive delay or skew.
WARNING - par: The driver of primary clock net nCRAS_c is not placed on one of the PIO sites dedicated for primary clocks.  This primary clock will be routed to a H-spine through general routing resource and may suffer from excessive delay or skew.
WARNING - par: The driver of primary clock net nCCAS_c is not placed on one of the PIO sites dedicated for primary clocks.  This primary clock will be routed to a H-spine through general routing resource and may suffer from excessive delay or skew.

Completed router resource preassignment. Real time: 6 secs 

Start NBR router at 21:32:33 08/16/21

*****************************************************************
Info: NBR allows conflicts(one node used by more than one signal)
      in the earlier iterations. In each iteration, it tries to  
      solve the conflicts while keeping the critical connections 
      routed as short as possible. The routing process is said to
      be completed when no conflicts exist and all connections   
      are routed.                                                
Note: NBR uses a different method to calculate timing slacks. The
      worst slack and total negative slack may not be the same as
      that in TRCE report. You should always run TRCE to verify  
      your design.                                               
*****************************************************************

Start NBR special constraint process at 21:32:33 08/16/21

Start NBR section for initial routing at 21:32:33 08/16/21
Level 1, iteration 1
0(0.00%) conflict; 535(86.57%) untouched conns; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.084ns/0.000ns; real time: 6 secs 
Level 2, iteration 1
0(0.00%) conflict; 535(86.57%) untouched conns; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.084ns/0.000ns; real time: 6 secs 
Level 3, iteration 1
0(0.00%) conflict; 509(82.36%) untouched conns; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.038ns/0.000ns; real time: 6 secs 
Level 4, iteration 1
23(0.19%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 

Info: Initial congestion level at 75% usage is 0
Info: Initial congestion area  at 75% usage is 0 (0.00%)

Start NBR section for normal routing at 21:32:33 08/16/21
Level 1, iteration 1
0(0.00%) conflict; 24(3.88%) untouched conns; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 
Level 4, iteration 1
8(0.07%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 
Level 4, iteration 2
4(0.03%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 
Level 4, iteration 3
0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 

Start NBR section for setup/hold timing optimization with effort level 3 at 21:32:33 08/16/21

Start NBR section for re-routing at 21:32:33 08/16/21
Level 4, iteration 1
0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; 
Estimated worst slack/total negative slack<setup>: 2.023ns/0.000ns; real time: 6 secs 

Start NBR section for post-routing at 21:32:33 08/16/21

End NBR router with 0 unrouted connection

NBR Summary
-----------
  Number of unrouted connections : 0 (0.00%)
  Number of connections with timing violations : 0 (0.00%)
  Estimated worst slack<setup> : 2.023ns
  Timing score<setup> : 0
-----------
Notes: The timing info is calculated for SETUP only and all PAR_ADJs are ignored.



Total CPU time 6 secs 
Total REAL time: 7 secs 
Completely routed.
End of route.  618 routed (100.00%); 0 unrouted.

Hold time timing score: 0, hold timing errors: 0

Timing score: 0 

Dumping design to file RAM2GS_LCMXO256C_impl1.dir/5_1.ncd.


All signals are completely routed.


PAR_SUMMARY::Run status = Completed
PAR_SUMMARY::Number of unrouted conns = 0
PAR_SUMMARY::Worst  slack<setup/<ns>> = 2.023
PAR_SUMMARY::Timing score<setup/<ns>> = 0.000
PAR_SUMMARY::Worst  slack<hold /<ns>> = 0.339
PAR_SUMMARY::Timing score<hold /<ns>> = 0.000
PAR_SUMMARY::Number of errors = 0

Total CPU  time to completion: 6 secs 
Total REAL time to completion: 7 secs 

par done!

Note: user must run 'Trace' for timing closure signoff.

Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp.   All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc.  All rights reserved.
Copyright (c) 2001 Agere Systems   All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation,  All rights reserved.