Apple-2-HW/RetroConnector
2
0
Fork 0
mirror of https://github.com/option8/RetroConnector.git synced 2024-06-09 16:29:32 +00:00
Code Issues Projects Releases Wiki Activity
f7138bd1bc
RetroConnector/USB_IIe_Kbd
History
Charles Mangin 3ca006d483 Added macro functions 
New macros:
F1 - call-151
F2 - WeaknessPoint by Martin Haye
F3 - Joystick calibration
2014-02-02 08:22:48 -05:00
..
Arduino/USB_IIe_Kbd Added macro functions 2014-02-02 08:22:48 -05:00
PCB updated to rev3 for KansasFest 2013-07-02 10:59:33 -04:00
README.md Added macro functions 2014-02-02 08:22:48 -05:00

README.md

FAQ

http://mentalhygiene.com/retroconnector/#interface

Function Keys

The F12 key sends CTRL+Reset.

Macros

There are currently three handy macros included in the Keyboard Interface firmware. The are triggered by the F-keys F1 through F3.

F1: enter the Monitor CALL -151

F2: WeaknessPoint Minus by Martin Haye 8:20 35 FD 20 ED FD 4C 8 0 8G

This is Martin's minimal presentation interface (i.e. "Not PowerPoint")

To clear the screen and begin typing, hit ESC, then @.

To navigate the screen, hit ESC, then I,J,K, or M. Then ESC again to edit.

F3: Calibrate joysticks 10 print pdl(0) " " pdl(1) " " peek(-16287) " " peek(-16286) : goto 10

Center on your joystick should read (approximately) 127 127.

The third and fourth numbers in the display are the joystick buttons. Pressed, they should read higher than 128, and lower than 128 when not pressed.

Hardware Buttons

There are two switches on the RetroConnector Keyboard Interface board. They are labelled "Apple" and "CTRL+RESET"

Pressing the "CTRL+RESET" switch sends CTRL+Reset to reset the system. Hold the "Apple" switch while pressing "CTRL+RESET" will reboot the computer.