Issue #14 - consume the ACK to the xmodem EOT when sending files.

TommyPROM/TommyPROM.ino

@@ -19,7 +19,7 @@
 #include "XModem.h"
 
 
-static const char * MY_VERSION = "2.1";
+static const char * MY_VERSION = "2.2";
 
 
 // Global status

TommyPROM/XModem.cpp

@@ -103,7 +103,16 @@ bool XModem::SendFile(uint32_t address, uint32_t fileSize)
         bytesSent += PKTLEN;
     }
 
+    // Signal end of transfer and process the ACK 
     Serial.write(XMDM_EOT);
+    rxChar = GetChar(5000);
+    if (rxChar != XMDM_ACK)
+    {
+        cmdStatus.error("Expected XModem ACK to EOT, but received:");
+        cmdStatus.setValueDec(0, "char", rxChar);
+        return false;
+    }
+
     return true;
 }
 
@@ -247,6 +256,3 @@ void XModem::SendPacket(uint32_t address, uint8_t seq)
     Serial.write(crc >> 8);
     Serial.write(crc & 0xff);
 }
-
-
-

docs/index.md

@@ -70,6 +70,10 @@ program, such as TeraTerm (Windows) or Minicom (Linux).  The Arduino development
 Monitor can also be used as a terminal initially, but it does not support XMODEM
 transfers, so the READ and WRITE commands can't be used.
 
+When using minicom, a few parameters need to be set.  Disable both hardware and software
+flow control.  Also add the '-c' command line option to the two xmodem settings to enable
+CRC mode for the file transfers.
+
 Set the terminal's serial parameters to 115200 baud, 8 bits, no parity, 1 stop bit to
 match the Arduino.  Press the Enter key.  If the connection is successful, TommyPROM will
 display a menu of options.