mirror of
https://github.com/TomNisbet/TommyPROM.git
synced 2024-11-24 23:31:42 +00:00
doc links
This commit is contained in:
parent
841e1f3ab7
commit
fc42ef50e1
@ -38,12 +38,12 @@ Power inputs and a switch are provided to support older flash and EEPROM chips t
|
|||||||
higher programming voltages. Many of these chips just need a higher voltage, like 12V,
|
higher programming voltages. Many of these chips just need a higher voltage, like 12V,
|
||||||
applied to the VPP pin continuously during the programing and verification cycle. In
|
applied to the VPP pin continuously during the programing and verification cycle. In
|
||||||
normal operation, the 5V VCC signal is also applied to the VPP pin. The board has VPP
|
normal operation, the 5V VCC signal is also applied to the VPP pin. The board has VPP
|
||||||
inputs for two voltages. Applying 12V to __VPP In High__ and 5V to __VPP In Low__ lets
|
inputs for two voltages. Applying 12V to _VPP In High_ and 5V to _VPP In Low_ lets
|
||||||
the VPP output be switched between these two voltages using a manual slide switch for
|
the VPP output be switched between these two voltages using a manual slide switch for
|
||||||
programming.
|
programming.
|
||||||
|
|
||||||
For chips that require a high voltage VPP pulse during programming, some external
|
For chips that require a high voltage VPP pulse during programming, some external
|
||||||
switching circuitry will be needed to allow the Arduino to control the VPP voltage. There
|
switching circuitry will be needed to allow the Arduino to control the VPP voltage. There
|
||||||
is a header connected to the unused D13 pin that can support this. See the
|
is a header connected to the unused D13 pin that can support this. See the
|
||||||
[Intel 8755 version of the hardware](hardware/#intel-8755a-hardware-version) for an
|
[Intel 8755 version of the hardware](../hardware/#intel-8755a-hardware-version) for an
|
||||||
example of voltage switching by TommyPROM.
|
example of voltage switching by TommyPROM.
|
||||||
|
Loading…
Reference in New Issue
Block a user