Commit Graph

24 Commits

Author SHA1 Message Date
Tom Nisbet
e4703f4a88 Issue #20 - TeraTerm XModem file transfers with W command. 2020-11-14 13:26:08 -05:00
Tom Nisbet
ec4686bfa0 File transfer default back to XModem-CRC for #20 2020-11-11 17:46:31 -05:00
Tom Nisbet
b131fbe8ae Fix #19 - XModem changed from 16-bit CRC to 8-bit checksum 2020-10-14 11:58:14 -04:00
Tom Nisbet
cb71caca4b Fix #18 - addressing bug with 74LS595 shift registers 2020-10-12 18:41:12 -04:00
Tom Nisbet
e45f1e3377 Fix #17 - pulse both CE and OE during the write verify cycle. 2020-10-10 21:18:53 -04:00
Tom Nisbet
3c4de71cd8 Add debug for XModem transfer failure 2020-10-07 12:04:20 -04:00
Tom Nisbet
910d07fb58 Fix #15 - typo in high address register pin definition. 2020-08-26 11:28:28 -04:00
Tom Nisbet
7a60862a6d Issue #14 - consume the ACK to the xmodem EOT when sending files. 2020-08-24 19:55:06 -04:00
Tom Nisbet
b8251d5c10 Add support for 74LS595 shift registers 2020-08-24 12:14:20 -04:00
Tom Nisbet
885869e7fa Fix #12 - add aemiller51's Poke command 2020-08-15 13:56:43 -04:00
Tom Nisbet
519e90ffcb fixes #11 - ASCII dump missing character 2020-06-29 15:26:30 -04:00
Tom Nisbet
ea9ca21f6d Move readmes to the github pages 2020-06-29 11:48:57 -04:00
Tom Nisbet
ee120e352f Fixes #8 - allow CR or LF as the terminal EOL character 2020-05-21 23:01:20 -04:00
NiHuShu
1c02cf534e
Fixed not compiling when using 27xx profile
I'm not sure if this is the correct fix but without this one line the code wouldn't compile and it would say that "data" wasn't declared.
2020-01-30 12:23:50 +01:00
Tom Nisbet
463cbbf154 Extend addressing to 19 bits for larger chips like the 29C040 2019-07-19 23:21:36 -04:00
Tom Nisbet
23454b9dad Optimize Address Register code for 28C timing requirements
Also remove slower generic Arduino code so that the project is now tied
to specific Arduino versions.
Add readme for 28C chips.
2019-06-15 22:20:02 -04:00
Tom Nisbet
ed539fe310 Add lock command for 28C devices 2019-06-08 22:22:58 -04:00
TomNisbet
54e118215a
Fix broken link to extenstions README 2019-06-02 21:57:33 -04:00
Tom Nisbet
f5b2a9241a Fix address error with 8755A burning 2018-12-22 09:59:41 -05:00
Tom Nisbet
98986f2922 Fix schematic label errors and pin assignments on 8755A device to match the schematic 2018-12-20 16:41:26 -05:00
Tom Nisbet
4dbabf7630 Fix pin assignments on 8755A device to match the schematic 2018-12-20 15:38:07 -05:00
Tom Nisbet
00c251a177 Fix typo to define UNO platform 2018-12-20 15:22:29 -05:00
Tom Nisbet
16ded8af16 Update documentation for new modular code and 8755A support 2018-05-18 00:10:41 -04:00
per1234
642f540df2 Move sketch to appropriately named subfolder
The Arduino IDE requires that a sketch be located in a folder of the same name. Although the name of the repository does match the sketch name, when GitHub's popular Clone or download > Download ZIP feature is used to download the contents of a repository the branch/release/commit name is appended to the folder name, causing a mismatch.

When opening a file that does not meet this sketch/folder name matching requirement the Arduino IDE presents a dialog:

The file "TommyPROM.ino" needs to be inside a sketch folder named "TommyPROM".
Create this folder, move the file, and continue?

After clicking "OK" the Arduino IDE currently moves only the file TommyPROM.ino to the new folder, leaving behind the other source files. This causes compilation of the sketch to fail:

TommyPROM-master\TommyPROM\TommyPROM.ino:13:23: fatal error: Configure.h: No such file or directory

 #include "Configure.h"
2018-05-11 00:58:55 -07:00