mirror of
https://github.com/TomNisbet/TommyPROM.git
synced 2024-11-24 08:31:16 +00:00
441 lines
11 KiB
C++
441 lines
11 KiB
C++
/**
|
|
* Test hardware for ATMEL 28C series EEPROMs.
|
|
*
|
|
* The hardware uses two 74LS164 shift registers as the low and
|
|
* high address registers.
|
|
**/
|
|
|
|
#include "Configure.h"
|
|
|
|
#define LED 13
|
|
|
|
PromDevice28C prom(32 * 1024L, 64, 10, true);
|
|
|
|
|
|
/*****************************************************************************/
|
|
/*****************************************************************************/
|
|
|
|
/**
|
|
* CLI parse functions
|
|
*/
|
|
const char hex[] = "0123456789abcdef";
|
|
|
|
|
|
// Read a line of data from the serial connection.
|
|
char * readLine(char * buffer, int len)
|
|
{
|
|
for (int ix = 0; (ix < len); ix++)
|
|
{
|
|
buffer[ix] = 0;
|
|
}
|
|
|
|
// read serial data until linebreak or buffer is full
|
|
char c = ' ';
|
|
int ix = 0;
|
|
do {
|
|
if (Serial.available())
|
|
{
|
|
c = Serial.read();
|
|
if ((c == '\b') && (ix > 0))
|
|
{
|
|
// Backspace, forget last character
|
|
--ix;
|
|
}
|
|
buffer[ix++] = c;
|
|
Serial.write(c);
|
|
}
|
|
} while ((c != '\n') && (ix < len));
|
|
|
|
buffer[ix - 1] = 0;
|
|
return buffer;
|
|
}
|
|
|
|
|
|
|
|
|
|
/************************************************************
|
|
* convert a single hex character [0-9a-fA-F] to its value
|
|
* @param char c single character (digit)
|
|
* @return byte value of the digit (0-15)
|
|
************************************************************/
|
|
byte hexDigit(char c)
|
|
{
|
|
if ((c >= '0') && (c <= '9'))
|
|
{
|
|
return c - '0';
|
|
}
|
|
else if ((c >= 'a') && (c <= 'f'))
|
|
{
|
|
return c - 'a' + 10;
|
|
}
|
|
else if ((c >= 'A') && (c <= 'F'))
|
|
{
|
|
return c - 'A' + 10;
|
|
}
|
|
else
|
|
{
|
|
return 0xff;
|
|
}
|
|
}
|
|
|
|
|
|
/************************************************************
|
|
* Convert a hex string to a uint32_t value.
|
|
* Skips leading spaces and terminates on the first non-hex
|
|
* character. Leading zeroes are not required.
|
|
*
|
|
* No error checking is performed - if no hex is found then
|
|
* defaultValue is returned. Similarly, a hex string of more than
|
|
* 8 digits will return the value of the last 8 digits.
|
|
* @param pointer to string with the hex value of the word (modified)
|
|
* @return unsigned int represented by the digits
|
|
************************************************************/
|
|
uint32_t getHex32(char *& pData, uint32_t defaultValue=0)
|
|
{
|
|
uint32_t u32 = 0;
|
|
|
|
while (isspace(*pData))
|
|
{
|
|
++pData;
|
|
}
|
|
|
|
if (isxdigit(*pData))
|
|
{
|
|
while (isxdigit(*pData)) {
|
|
u32 = (u32 << 4) | hexDigit(*pData++);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
u32 = defaultValue;
|
|
}
|
|
|
|
return u32;
|
|
}
|
|
|
|
void printByte(byte b)
|
|
{
|
|
char line[3];
|
|
|
|
line[0] = hex[b >> 4];
|
|
line[1] = hex[b & 0x0f];
|
|
line[2] = '\0';
|
|
|
|
Serial.print(line);
|
|
}
|
|
|
|
|
|
void printWord(word w)
|
|
{
|
|
char line[5];
|
|
|
|
line[0] = hex[(w >> 12) & 0x0f];
|
|
line[1] = hex[(w >> 8) & 0x0f];
|
|
line[2] = hex[(w >> 4) & 0x0f];
|
|
line[3] = hex[(w) & 0x0f];
|
|
line[4] = '\0';
|
|
|
|
Serial.print(line);
|
|
}
|
|
|
|
|
|
void zapTest(uint32_t start)
|
|
{
|
|
byte testData[] =
|
|
{
|
|
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
|
|
0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
|
|
0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0xfe,
|
|
0x00, 0xff, 0x55, 0xaa, '0', '1', '2', '3'
|
|
};
|
|
|
|
if (!prom.writeData(testData, sizeof(testData), start))
|
|
{
|
|
Serial.println("Write failed");
|
|
return;
|
|
}
|
|
|
|
delay(100);
|
|
for (unsigned ix = 0; ix < sizeof(testData); ix++)
|
|
{
|
|
byte val = prom.readData(start + ix);
|
|
if (val != testData[ix])
|
|
{
|
|
Serial.print(F("Verify failed, addr="));
|
|
Serial.print(start + ix, HEX);
|
|
Serial.print(F(", read="));
|
|
Serial.print(val, HEX);
|
|
Serial.print(F(", expected="));
|
|
Serial.println(testData[ix], HEX);
|
|
return;
|
|
}
|
|
}
|
|
Serial.println("Write test successful");
|
|
}
|
|
|
|
void pokeBytes(char * pCursor)
|
|
{
|
|
uint32_t val;
|
|
uint32_t start;
|
|
unsigned byteCtr = 0;
|
|
|
|
enum { BLOCK_SIZE = 32 };
|
|
byte data[BLOCK_SIZE];
|
|
|
|
//first value returned is the starting address
|
|
start = getHex32(pCursor, 0);
|
|
|
|
while (((val = getHex32(pCursor, 0xffff)) != 0xffff) && (byteCtr < BLOCK_SIZE))
|
|
{
|
|
data[byteCtr++] = byte(val);
|
|
}
|
|
|
|
if (byteCtr > 0)
|
|
{
|
|
if (!prom.writeData(data, byteCtr, start))
|
|
{
|
|
Serial.println(F("Write failed"));
|
|
return;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
Serial.println(F("Missing address or data"));
|
|
return;
|
|
}
|
|
delay(100);
|
|
|
|
for (unsigned ix = 0; ix < byteCtr ; ix++)
|
|
{
|
|
byte val = prom.readData(start + ix);
|
|
if (val != data[ix])
|
|
{
|
|
Serial.print(F("Verify failed, addr="));
|
|
Serial.print(start + ix, HEX);
|
|
Serial.print(F(", read="));
|
|
Serial.print(val, HEX);
|
|
Serial.print(F(", expected="));
|
|
Serial.println(data[ix], HEX);
|
|
return;
|
|
}
|
|
}
|
|
Serial.println("Poke successful");
|
|
}
|
|
|
|
void dumpBlock(uint32_t start, uint32_t end)
|
|
{
|
|
char line[81];
|
|
// 01234567891 234567892 234567893 234567894 234567895 234567896 234567897 23456789
|
|
// 01234: 01 23 45 67 89 ab cf ef 01 23 45 67 89 ab cd ef 1.2.3.4. 5.6.7.8.
|
|
int count = 0;
|
|
|
|
memset(line, ' ', sizeof(line));
|
|
|
|
char * pHex = line;
|
|
char * pChar = line + 59;
|
|
for (uint32_t addr = start; (addr <= end); addr++)
|
|
{
|
|
if (count == 0)
|
|
{
|
|
//print out the address at the beginning of the line
|
|
pHex = line;
|
|
pChar = line + 59;
|
|
*pHex++ = hex[(addr >> 16) & 0x0f];
|
|
*pHex++ = hex[(addr >> 12) & 0x0f];
|
|
*pHex++ = hex[(addr >> 8) & 0x0f];
|
|
*pHex++ = hex[(addr >> 4) & 0x0f];
|
|
*pHex++ = hex[(addr) & 0x0f];
|
|
*pHex++ = ':';
|
|
*pHex++ = ' ';
|
|
}
|
|
|
|
byte data = prom.readData(addr);
|
|
*pHex++ = hex[data >> 4];
|
|
*pHex++ = hex[data & 0x0f];
|
|
*pHex++ = ' ';
|
|
*pChar++ = ((data < 32) | (data >= 127)) ? '.' : data;
|
|
|
|
if ((count & 3) == 3)
|
|
{
|
|
*pHex++ = ' ';
|
|
}
|
|
if ((count & 7) == 7)
|
|
{
|
|
*pChar++ = ' ';
|
|
}
|
|
if ((++count >= 16) || (addr == end))
|
|
{
|
|
*pChar = '\0';
|
|
Serial.println(line);
|
|
memset(line, ' ', sizeof(line));
|
|
count = 0;
|
|
}
|
|
}
|
|
|
|
if (count)
|
|
{
|
|
Serial.println();
|
|
}
|
|
}
|
|
|
|
/************************************************
|
|
* MAIN
|
|
*************************************************/
|
|
word addr = 0;
|
|
|
|
void setup()
|
|
{
|
|
// Do this first so that it initializes all of the hardware pins into a
|
|
// non-harmful state. The Arduino or the target EEPROM could be damaged
|
|
// if both writing to the data bus at the same time.
|
|
prom.begin();
|
|
|
|
Serial.begin(115200);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
commandLoop();
|
|
}
|
|
|
|
static void commandLoop()
|
|
{
|
|
byte b;
|
|
uint32_t arg;
|
|
const uint32_t noValue = uint32_t(-1);
|
|
char line[120];
|
|
char * cursor = line + 1;
|
|
unsigned long timeStart;
|
|
unsigned long timeEnd;
|
|
bool cmdError = false;
|
|
bool unknownCmd = false;
|
|
|
|
Serial.print("\n#");
|
|
Serial.flush();
|
|
readLine(line, sizeof(line));
|
|
byte c = tolower(line[0]);
|
|
if ((c >= 'A') && (c <= 'Z')) {
|
|
c |= 0x20;
|
|
}
|
|
|
|
switch (c)
|
|
{
|
|
case 'a':
|
|
if ((arg = getHex32(cursor, noValue)) != noValue)
|
|
{
|
|
prom.setAddress(word(arg));
|
|
}
|
|
else
|
|
cmdError = true;
|
|
break;
|
|
|
|
case 'd':
|
|
if ((arg = getHex32(cursor, noValue)) != noValue)
|
|
{
|
|
prom.disableOutput();
|
|
prom.setDataBusMode(OUTPUT);
|
|
prom.writeDataBus(byte(arg));
|
|
}
|
|
else
|
|
cmdError = true;
|
|
break;
|
|
|
|
case 'c':
|
|
case 'o':
|
|
case 'w':
|
|
if ((line[1] != 'd') && (line[1] != 'e'))
|
|
{
|
|
cmdError = true;
|
|
}
|
|
else
|
|
{
|
|
bool enable = line[1] == 'e';
|
|
if (c == 'c') {
|
|
if (enable) prom.enableChip(); else prom.disableChip();
|
|
} else if (c == 'w') {
|
|
if (enable) prom.enableWrite(); else prom.disableWrite();
|
|
} else { // c == 'o'
|
|
if (enable) {
|
|
// Don't allow the prom and the data bus to output at the same time
|
|
prom.setDataBusMode(INPUT);
|
|
prom.enableOutput();
|
|
} else {
|
|
prom.disableOutput();
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 'r':
|
|
prom.setDataBusMode(INPUT);
|
|
prom.enableOutput();
|
|
b = prom.readDataBus();
|
|
printByte(b);
|
|
Serial.println();
|
|
prom.disableOutput();
|
|
break;
|
|
|
|
case 'l':
|
|
Serial.println(F("Writing the lock code to enable Software Write Protect mode."));
|
|
prom.enableSoftwareWriteProtect();
|
|
break;
|
|
|
|
case 'u':
|
|
Serial.println(F("Writing the unlock code to disable Software Write Protect mode."));
|
|
timeStart = micros();
|
|
prom.disableSoftwareWriteProtect();
|
|
timeEnd = micros();
|
|
Serial.print("Unlock command time in uSec=");
|
|
Serial.println(timeEnd - timeStart);
|
|
break;
|
|
|
|
case 'p':
|
|
pokeBytes(line+1);
|
|
break;
|
|
|
|
case 's':
|
|
if ((arg = getHex32(cursor, noValue)) != noValue)
|
|
{
|
|
Serial.println();
|
|
dumpBlock(arg, arg + 63);
|
|
}
|
|
else
|
|
cmdError = true;
|
|
break;
|
|
|
|
case 'z':
|
|
if ((arg = getHex32(cursor, noValue)) != noValue)
|
|
{
|
|
zapTest(arg);
|
|
}
|
|
else
|
|
cmdError = true;
|
|
break;
|
|
|
|
default:
|
|
unknownCmd = true;
|
|
break;
|
|
}
|
|
|
|
if (cmdError) {
|
|
Serial.println(F("Missing or invalid command argument"));
|
|
} else if (unknownCmd) {
|
|
Serial.print(F("Hardware Verifier - "));
|
|
Serial.println(prom.getName());
|
|
Serial.println();
|
|
Serial.println(F("Valid commands are:"));
|
|
Serial.println(F(" Axxxx - Set address bus to xxxx"));
|
|
Serial.println(F(" Dxx - Set Data bus to xx"));
|
|
Serial.println(F(" Cs - Set Chip enable to state (e=enable, d=disable)"));
|
|
Serial.println(F(" Os - Set Output enable to state (e=enable, d=disable)"));
|
|
Serial.println(F(" Ws - Set Write enable to state (e=enable, d=disable)"));
|
|
Serial.println(F(" R - Read and print the value on the data bus"));
|
|
Serial.println(F(" L - Send Lock sequence to enable device Software Data Protection"));
|
|
Serial.println(F(" U - Send Unlock sequence to disable device Software Data Protection"));
|
|
Serial.println("");
|
|
Serial.println(F(" Pxxxx dd dd... - Poke (write) values to EEPROM (up to 32 values)"));
|
|
Serial.println(F(" Sxxxx - Show (dump) bytes from EEPROM to terminal"));
|
|
Serial.println(F(" Zxxxx - Zap (burn) a 32 byte test pattern"));
|
|
}
|
|
}
|