Added support for securing/protecting the GAL

credits: GALmate software

afterburner.ino

@@ -83,6 +83,7 @@
 #define COMMAND_SET_GAL_TYPE 'g'
 #define COMMAND_ENABLE_CHECK_TYPE 'f'
 #define COMMAND_DISABLE_CHECK_TYPE 'F'
+#define COMMAND_ENABLE_SECURITY 's'
 
 #define READGAL 0
 #define VERIFYGAL 1
@@ -866,14 +867,14 @@ void printPes(char type) {
     case GAL16V8: Serial.print(F("GAL16V8 ")); break;
     case GAL20V8: Serial.print(F("GAL20V8 ")); break;
     case GAL22V10: Serial.print(F("GAL20V10 ")); break;
-    case ATF16V8B: Serial.print(F("ATF16V8B ")); break;
+    case ATF16V8B: Serial.print(0 == (flagBits & FLAG_BIT_ATF16V8C) ? F("ATF16V8B "): F("ATF16V8C ")); break;
     case ATF22V10B: Serial.print(F("ATF22V10B ")); break;
     case ATF22V10C: Serial.print(F("ATF22V10C ")); break;
   }
 
   //programming info
   if (UNKNOWN != type) {
-    Serial.print(F("  VPP=")); //without the front space chars the print causes issues (why?)
+    Serial.print(F(" VPP="));
     Serial.print(vpp >> 2, DEC);
     Serial.print(F("."));
     Serial.print((vpp & 3) * 25, DEC);
@@ -1279,6 +1280,17 @@ static void eraseGAL(void)
     turnOff();
 }
 
+// sets security bit - disables fuse reading
+static void secureGAL(void)
+{
+    turnOn(WRITEGAL);
+
+    setPV(1);
+    strobeRow(61, BIT_ONE); // strobe row and send one bit with value 1
+
+    setPV(0);
+    turnOff();
+}
 
 static char checkGalTypeViaPes(void)
 {
@@ -1669,6 +1681,13 @@ void loop() {
         }
       } break;
 
+      // sets the security bit
+      case COMMAND_ENABLE_SECURITY: {
+        if (doTypeCheck()) {
+          secureGAL();
+        }
+      } break;
+
       // toggles terminal echo
       case COMMAND_ECHO : {
         echoEnabled = 1 - echoEnabled;

src_pc/afterburner.c

@@ -117,6 +117,7 @@ char opErase = 0;
 char opInfo = 0;
 char opVerify = 0;
 char opTestVPP = 0;
+char opSecureGal = 0;
 
 
 static int waitForSerialPrompt(char* buf, int bufSize, int maxDelay);
@@ -141,6 +142,7 @@ static void printHelp() {
     printf("  -d <serial_device> : name of the serial device. Default is: %s\n", DEFAULT_SERIAL_DEVICE_NAME);
     printf("                       serial params are: 38400, 8N1\n");
     printf("  -nc : do not check device GAL type before operation: force the GAL type set on command line\n");
+    printf("  -sec: enable security - protect the chip. Use with 'w' or 'v' commands.\n");
     printf("examples:\n");
     printf("  afterburner i -t ATF16V8B : reads and prints the device info\n");
     printf("  afterburner r -t ATF16V8B : reads the fuse map from the GAL chip and displays it\n");
@@ -151,7 +153,7 @@ static void printHelp() {
     printf("         of the chip. If the programing voltage is unknown use 10V.\n");
     printf("  - known VPP voltages as tested on Afterburner with Arduino UNO: \n");
     printf("        Lattice GAL16V8D, GAL22V10D: 12V \n");
-    printf("        Atmel   ATF16V8D, ATF22V10C: 10V \n");
+    printf("        Atmel   ATF16V8B, AFT16V8C, ATF22V10C: 10V \n");
 }
 
 static char checkArgs(int argc, char** argv) {
@@ -176,7 +178,10 @@ static char checkArgs(int argc, char** argv) {
             deviceName = argv[i];
         } else if (strcmp("-nc", param) == 0) {
             noGalCheck = 1;
-        } else if (param[0] != '-') {
+        } else if (strcmp("-sec", param) == 0) {
+            opSecureGal = 1;
+        }
+        else if (param[0] != '-') {
             modes = param;
         }
     }
@@ -844,6 +849,20 @@ static char operationSetGalType(Galtype type) {
     return result;    
 }
 
+static char operationSecureGal() {
+    int readSize;
+    char result;
+
+    if (openSerial() != 0) {
+        return -1;
+    }
+    if (verbose) {
+        printf("sending 's' command...\n");
+    }
+    result = sendGenericCommand("s\r", "secure GAL failed ?", 4000, 0);
+    closeSerial();
+    return result;
+}
 
 static char operationEraseGal(void) {
     char buf[MAX_LINE];
@@ -947,6 +966,11 @@ int main(int argc, char** argv) {
         } else if (opTestVPP) {
             result = operationTestVpp();
         }
+        if (0 == result && (opWrite || opVerify)) {
+            if (opSecureGal) {
+                operationSecureGal();
+            }
+        }
     }
 
     if (verbose) {