From 95722556d5362b505919c4b86641d4ad49576556 Mon Sep 17 00:00:00 2001 From: ole00 Date: Fri, 7 Apr 2023 18:53:55 +0100 Subject: [PATCH] README.md: fixed links to images --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index b964e88..c67d9c6 100644 --- a/README.md +++ b/README.md @@ -1,6 +1,6 @@ # afterburner GAL chip programmer for Arduino -![Board image](https://github.com/ole00/afterburner/raw/master/img/afterburner_small.jpg "afterburner") +![Board image](https://github.com/ole00/afterburner/raw/version_4_legacy/img/afterburner_small.jpg "afterburner") This is a GAL IC programmer software that allows to program GAL IC chips from various manfucaturers. It is based on work of several other people: @@ -26,7 +26,7 @@ Supported GAL chips: * Lattice GAL16V8A, GAL16V8B, GAL16V8D * Lattice GAL22V10B * National GAL16V8 -* Lattice GAL20V8B via [adapter board](https://github.com/ole00/afterburner/raw/master/img/gal20v8_adapter.png) +* Lattice GAL20V8B via [adapter board](https://github.com/ole00/afterburner/raw/version_4_legacy/img/gal20v8_adapter.png) **Update 25/03/2023:** Added support securing the GAL contents. Use '-sec' parameter during write or verify to protect the GAL. Added support for Atmel's Power-Down feature on ATF16V8C and ATF22V10C GALs. The Power-Down is enabled or diabled depending @@ -250,7 +250,7 @@ Troubleshooting: * solder a thin keynar wire to pin 4 which is your ENable pin. - ![See the MT3608 image in img directory for more details.](https://github.com/ole00/afterburner/raw/master/img/mt3608_mod.jpg "EN pin mod") + ![See the MT3608 image in img directory for more details.](https://github.com/ole00/afterburner/raw/version_4_legacy/img/mt3608_mod.jpg "EN pin mod") * Once that is done, toggling the EN pin will change the output voltage