65443dd5f2
added precompiled binaries for ver 0.4.2
2023-03-25 21:30:31 +00:00
81382a0e91
Afterburner sketch: updated top comments
2023-03-25 21:30:31 +00:00
630851857a
Removed old releases.
2023-03-25 21:30:31 +00:00
e9d005213e
Added support for Power-Down pin on ATF16V8C
...
The PD feature is now selectively enabled or disabled based
on the JED contents. Also, when fuses are read the printout
of the JED file reflects the PD fuse bit state. So, when
the PD fuse bit is enabled then the JED file contains an extra
fuse bit set to 1. The ATF22V10C now behaves the same way regarding
the PD fuse bit (previously Afterburner always disabled the PD
function).
credits: GALmate software
2023-03-25 21:30:31 +00:00
317b3520d8
Added support for securing/protecting the GAL
...
credits: GALmate software
2023-03-25 21:30:31 +00:00
ba15a74dee
Readme.md: support for ATF16V8C
...
Also added links to GALmate by Yorck and credited him for the ATF16V8C programming algorithm.
2023-03-21 23:43:02 +00:00
ffa637eb8e
PC app: lunx serial port read tweak
...
This change seems to fix a weird issue where some of the lines were split
in two lines. This could be reproduced when using 'i' command with ATF22V10C
or ATF16V8B repeatedly.
2023-03-21 23:23:24 +00:00
f48513f05b
sketch: read write and verify ATF16V8C
...
Based on GALmate by Yorck
https://www.ythiee.com/2021/06/06/galmate-hardware/
2023-03-21 20:48:47 +00:00
1dc2836125
sketch: reduced static memory allocation
2023-03-21 20:07:52 +00:00
45eb04de80
sketch: added detection of ATF16V8C
2023-03-21 19:58:40 +00:00
d393e0fcc8
Rewadme.md : update about the latest fix
2023-01-24 20:34:45 +00:00
f57bf6a1ef
version 0.4.1
2023-01-24 20:19:24 +00:00
ae955a8b6b
ensure GPIOs are set to Input when not active
...
This should prevent accidental damage of the GAL chip
during insertion into the socket.
2023-01-24 20:17:49 +00:00
ed14f825a5
fixed web url
2023-01-24 20:12:35 +00:00
9cf30e1611
updated title picture
2023-01-16 21:26:53 +00:00
aa53a480e7
added 3D printed case files
...
* use OpenScad to open the design .scad file
* the design file contains top part, bottom part and on/off switch
* .stl files are exported for your convenience
* .stl files can also be exported from OpenScad.
2023-01-15 22:04:20 +00:00
5689697b99
updated BOM
2023-01-07 11:45:47 +00:00
14c4eafc93
added adapter20v8 gerbers archive
2023-01-07 11:27:20 +00:00
52c63a60c8
fixed adapter PCB design for GAL20V8
...
* added SMT pads for resistors
* fixed bottom layer status
2023-01-07 11:25:48 +00:00
d19f8cc52f
new gerbers with R4 pull up resistor
2022-12-16 10:53:24 +00:00
996dfd8e93
Schematics: added pull up resistor R4 to SDOUT
...
Some GAL IC require pull-up on SDOUT
2022-12-15 19:55:14 +00:00
e7002ad90c
PCB: added pull up resistor to SDOUT
2022-12-15 19:54:13 +00:00
e530708db1
README.md - fixed dead link to atfblast
2022-12-15 17:50:59 +00:00
c233834021
Readme.md: ATF16V8BQL supported
...
ATF16V8BQL programmed and verified at VPP 10V. The IC works in circuit as well.
2022-10-31 20:57:40 +00:00
dc3461f243
Update README.md
...
Radme.md: added WinCUPL user's manual link
2022-06-19 22:01:53 +01:00
effb47869f
Update README.md
...
Readme.md: added CUPL Reference link
2022-06-19 21:55:26 +01:00
203b266fd8
Readme.md - added GAL related links
...
thanks to @ismal for sharing these links
2022-06-15 21:03:53 +01:00
ce07b06b62
READE.md added Lattice GAL20V8B to supported chip list
2022-06-11 15:58:45 +01:00
2334c0fb1f
added GAL20V8 info and adapter pcb
2022-06-11 12:02:26 +01:00
fa08cc1bbd
README.md - fixed a typo
2022-06-04 15:16:20 +01:00
769db96d77
added precompiled binaries for ver. 0.4
2022-04-22 20:44:21 +01:00
3fc0753273
added cross-compilation script for producing Mac OSX binary
2022-04-22 19:55:42 +01:00
39fe8258db
help: changed the afterburner's url
2022-04-22 19:54:32 +01:00
d518805925
serial port: support for keeping the port always opened
...
Closing serial port causes Arduino reset on Mac OSX.
2022-04-22 19:49:58 +01:00
b5d6fa6683
version 0.4 - baud rate changed to 57600. Please re-upload .ino sketch.
...
After testing with genuine arduino uno I could not make
it to work reliably using the original baudrate 38400 on
Windows 7. Linux worked OK, but Windows 7 inserted extra 2
bytes 0xFE or 0xFF at the beginnig of the serial communication
(at least that's what arduino read from the serial line).
Baudrate 57600 so far had no issue, another reliable option
seem to be 9600.
2022-04-01 22:15:48 +01:00
443072e423
pc app: fixed detection of serial prompt
2022-04-01 17:49:09 +01:00
772181f20b
sketch: remember the gal type between arduino resets
2022-03-30 22:14:32 +01:00
b20500912a
Merge pull request #15 from rreilink/master
...
Support for ATF22LV10. Fixes issue 11
2022-03-26 21:48:13 +00:00
58795b19ae
Support for ATF22LV10. Fixes issue 11
2022-03-26 09:06:51 +01:00
15bbde3906
Updated Readme.md - info about ATF16V8C
2021-10-25 22:57:02 +01:00
c0821a40f6
Merge branch 'master' of https://github.com/ole00/afterburner
2021-06-22 19:59:41 +01:00
935d52e12b
moved the PC app source to the src_pc directory
...
This fixes an issue with Arduino IDE which opens all .c files
(even unrelated) in the same directory when the .ino file is opened.
Fixes compilation error described in issue #10
2021-06-22 19:53:40 +01:00
f71ed5eaf5
Updated link to WinCupl application.
2020-09-02 21:00:09 +01:00
4edcfa01fc
update readme.md - clarity
2020-05-25 11:12:56 +01:00
2824eebfbc
updated readme.md - fixed typos
2020-05-25 10:25:56 +01:00
ebea9e87c6
updated readme.md - typo fix
2020-05-25 10:06:47 +01:00
eb37124211
updated readme.md - fixed programming of ATF16V8B
2020-05-25 10:04:15 +01:00
08d59a089e
Merge pull request #4 from mecparts/master
...
ATF16V8B chips would program & read w/o error, but they wouldn't work
2020-05-25 09:45:53 +01:00
b4faefc042
ATF16V8B was used cfgV8AB in some places, cfgV8 in others.
...
The chip would read, and write without error, but wouldn't work.
Changing all instances of cfgV8 to cfgV8AB in ATF16V8B
specific code seemed to get the programmed chip to work.
2020-05-25 00:34:24 -06:00
1a79e61479
Update README.md
...
update readme.md - issue with ATF16V8B notice
2020-05-24 21:26:04 +01:00
ole00
Rob Reilink
mecparts