ole00
5bcb23f1a2
sketch: GAL20V8 - disable pull-up on DOUT when inactive
2023-04-07 19:16:43 +01:00
ole00
8d12ec9e58
sketch: default VPP for non-Atmel chips set as 12V
...
Also, the defaults are used if no PES check is requested.
2023-04-07 19:16:43 +01:00
ole00
7d332acae6
PC app: support for new board design
...
Added:
* detection of the new board design
* VPP measurement (use 'm' commands)
* setting of calibration offset (use '-co' parameter)
2023-04-07 19:16:41 +01:00
ole00
4db4108d4a
Sketch: added support for new board design (v 3.0)
...
New features:
* unified socket for 20 pin and 24 devices (including GAL20V8)
* variable VPP via digi pot
* VPP measurement via A0 ADC (used for VPP calibration)
2023-04-07 19:15:36 +01:00
ole00
48982f241a
Readme.md : updated VPP values for ATFs and Lattice GALs
2023-03-30 23:53:45 +01:00
ole00
7774c76626
sketch: added support for erase-all and write-pes commands
2023-03-30 23:34:28 +01:00
ole00
7b9ccc9f8d
sketch: removed obsolete variable
2023-03-30 23:34:28 +01:00
ole00
1a3a009885
PC app: added support for erase-all and write-pes commands
2023-03-30 23:34:23 +01:00
ole00
c67ced85e7
Readme.md - added ATF16V8CZ to the list of supported GALs
2023-03-28 21:38:37 +01:00
ole00
76a5d7fa9c
Sketch: added support for ATF16V8CZ
2023-03-28 21:30:15 +01:00
ole00
c6087fdfed
Readme.md - fixed dead link to CUPL Reference book
2023-03-25 23:35:14 +00:00
ole00
45f7fea022
Update Readme.md
2023-03-25 21:44:51 +00:00
ole00
65443dd5f2
added precompiled binaries for ver 0.4.2
2023-03-25 21:30:31 +00:00
ole00
81382a0e91
Afterburner sketch: updated top comments
2023-03-25 21:30:31 +00:00
ole00
630851857a
Removed old releases.
2023-03-25 21:30:31 +00:00
ole00
e9d005213e
Added support for Power-Down pin on ATF16V8C
...
The PD feature is now selectively enabled or disabled based
on the JED contents. Also, when fuses are read the printout
of the JED file reflects the PD fuse bit state. So, when
the PD fuse bit is enabled then the JED file contains an extra
fuse bit set to 1. The ATF22V10C now behaves the same way regarding
the PD fuse bit (previously Afterburner always disabled the PD
function).
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
317b3520d8
Added support for securing/protecting the GAL
...
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
ba15a74dee
Readme.md: support for ATF16V8C
...
Also added links to GALmate by Yorck and credited him for the ATF16V8C programming algorithm.
2023-03-21 23:43:02 +00:00
ole00
ffa637eb8e
PC app: lunx serial port read tweak
...
This change seems to fix a weird issue where some of the lines were split
in two lines. This could be reproduced when using 'i' command with ATF22V10C
or ATF16V8B repeatedly.
2023-03-21 23:23:24 +00:00
ole00
f48513f05b
sketch: read write and verify ATF16V8C
...
Based on GALmate by Yorck
https://www.ythiee.com/2021/06/06/galmate-hardware/
2023-03-21 20:48:47 +00:00
ole00
1dc2836125
sketch: reduced static memory allocation
2023-03-21 20:07:52 +00:00
ole00
45eb04de80
sketch: added detection of ATF16V8C
2023-03-21 19:58:40 +00:00
ole00
d393e0fcc8
Rewadme.md : update about the latest fix
2023-01-24 20:34:45 +00:00
ole00
f57bf6a1ef
version 0.4.1
2023-01-24 20:19:24 +00:00
ole00
ae955a8b6b
ensure GPIOs are set to Input when not active
...
This should prevent accidental damage of the GAL chip
during insertion into the socket.
2023-01-24 20:17:49 +00:00
ole00
ed14f825a5
fixed web url
2023-01-24 20:12:35 +00:00
ole00
9cf30e1611
updated title picture
2023-01-16 21:26:53 +00:00
ole00
aa53a480e7
added 3D printed case files
...
* use OpenScad to open the design .scad file
* the design file contains top part, bottom part and on/off switch
* .stl files are exported for your convenience
* .stl files can also be exported from OpenScad.
2023-01-15 22:04:20 +00:00
ole00
5689697b99
updated BOM
2023-01-07 11:45:47 +00:00
ole00
14c4eafc93
added adapter20v8 gerbers archive
2023-01-07 11:27:20 +00:00
ole00
52c63a60c8
fixed adapter PCB design for GAL20V8
...
* added SMT pads for resistors
* fixed bottom layer status
2023-01-07 11:25:48 +00:00
ole00
d19f8cc52f
new gerbers with R4 pull up resistor
2022-12-16 10:53:24 +00:00
ole00
996dfd8e93
Schematics: added pull up resistor R4 to SDOUT
...
Some GAL IC require pull-up on SDOUT
2022-12-15 19:55:14 +00:00
ole00
e7002ad90c
PCB: added pull up resistor to SDOUT
2022-12-15 19:54:13 +00:00
ole00
e530708db1
README.md - fixed dead link to atfblast
2022-12-15 17:50:59 +00:00
ole00
c233834021
Readme.md: ATF16V8BQL supported
...
ATF16V8BQL programmed and verified at VPP 10V. The IC works in circuit as well.
2022-10-31 20:57:40 +00:00
ole00
dc3461f243
Update README.md
...
Radme.md: added WinCUPL user's manual link
2022-06-19 22:01:53 +01:00
ole00
effb47869f
Update README.md
...
Readme.md: added CUPL Reference link
2022-06-19 21:55:26 +01:00
ole00
203b266fd8
Readme.md - added GAL related links
...
thanks to @ismal for sharing these links
2022-06-15 21:03:53 +01:00
ole00
ce07b06b62
READE.md added Lattice GAL20V8B to supported chip list
2022-06-11 15:58:45 +01:00
ole00
2334c0fb1f
added GAL20V8 info and adapter pcb
2022-06-11 12:02:26 +01:00
ole00
fa08cc1bbd
README.md - fixed a typo
2022-06-04 15:16:20 +01:00
ole00
769db96d77
added precompiled binaries for ver. 0.4
2022-04-22 20:44:21 +01:00
ole00
3fc0753273
added cross-compilation script for producing Mac OSX binary
2022-04-22 19:55:42 +01:00
ole00
39fe8258db
help: changed the afterburner's url
2022-04-22 19:54:32 +01:00
ole00
d518805925
serial port: support for keeping the port always opened
...
Closing serial port causes Arduino reset on Mac OSX.
2022-04-22 19:49:58 +01:00
ole00
b5d6fa6683
version 0.4 - baud rate changed to 57600. Please re-upload .ino sketch.
...
After testing with genuine arduino uno I could not make
it to work reliably using the original baudrate 38400 on
Windows 7. Linux worked OK, but Windows 7 inserted extra 2
bytes 0xFE or 0xFF at the beginnig of the serial communication
(at least that's what arduino read from the serial line).
Baudrate 57600 so far had no issue, another reliable option
seem to be 9600.
2022-04-01 22:15:48 +01:00
ole00
443072e423
pc app: fixed detection of serial prompt
2022-04-01 17:49:09 +01:00
ole00
772181f20b
sketch: remember the gal type between arduino resets
2022-03-30 22:14:32 +01:00
ole00
b20500912a
Merge pull request #15 from rreilink/master
...
Support for ATF22LV10. Fixes issue 11
2022-03-26 21:48:13 +00:00
