ole00
dabfcf5aad
PC app: increase maximum time to wait for VPP measurement
2024-03-19 20:43:23 +00:00
ole00
79e33ab2a5
PC app: fix serial port read buffer overflow
...
Overflow happened when verbose printouts were enabled
in the Arduino sketch.
2024-03-19 20:41:43 +00:00
ole00
2754ff5c47
PC app: fixed typos in help text
2024-03-19 18:58:25 +00:00
ole00
733ea3c8e3
version increased to v.0.5.8
2024-03-17 21:15:05 +00:00
ole00
103a99ab7a
pc app: calibration takes longer time, wait longer
...
This is because the voltage settle time delay was increased
and also now 255 taps are scanned.
2024-03-17 21:15:05 +00:00
ole00
460d0f2caa
improve calibration offset resolution and range
...
range: -0.32V to +0.32V
steps: by 0.01V
2024-03-17 21:14:52 +00:00
ole00
cc64a29953
version increased to 0.5.7
2024-02-16 19:55:41 +00:00
ole00
5f2105680f
PC app: increase maximum wait time for operations
...
This fixes reading erased ATF750C when using sparse fusemap.
2024-02-16 19:44:52 +00:00
ole00
053c914fae
PC app: increase buffer sizes to fit ATF750C data
2024-02-16 19:44:52 +00:00
ole00
7ff02e0a8d
pc app: wait a bit longer when processing fuses
2024-02-16 19:44:52 +00:00
ole00
b216b16c9a
Initial support for ATF750C based on nospam2000 fork
...
Setup and PES reading works.
Based on fork: https://github.com/nospam2000/afterburner
By Michael D. - nospam2000
2024-02-16 19:44:48 +00:00
ole00
28c4a104d1
version increased to 0.5.6
2024-02-04 11:26:07 +00:00
HubertH
8ae5b495f8
Fixed B9 command bug
...
Fixed: Command 'B9' (Calibration Offset = 0,25V) doesn't work
Note: Also requires elimination of a bug in the PC program afterburner.ino
Added: Sending B4, if b /wo -co is executed
2024-02-04 11:13:47 +00:00
ole00
24494accde
version increased to 0.5.5
2023-11-22 21:39:05 +00:00
rhgndf
5c2cd50d47
Support GAL20RA10
2023-11-22 12:30:52 +08:00
rhgndf
8cbc013e68
Fix incorrect fuse uploading
2023-11-21 16:33:31 +08:00
rhgndf
2275e13091
Fix upload and 26v12 bits
2023-11-05 13:39:53 +08:00
rhgndf
b60f36b144
Support 26(C)V12
2023-11-05 13:39:51 +08:00
ole00
7944dbf2c1
PC App: fix gal type, take 3
2023-11-04 14:32:03 +00:00
ole00
f63ae40bb4
PC App: fix gal type, take 2
...
Thanks rhgndf for pointing that out!
2023-11-04 14:28:23 +00:00
ole00
95e461233e
Merge branch 'master' into atf20v8
2023-11-04 14:00:49 +00:00
ole00
08e3cea5c7
PC App: fix gal type
...
Now, the MCU code can decode more than 9 gal types.
2023-11-04 12:16:00 +00:00
rhgndf
ab9fa88437
Support ATF20V8B
2023-10-30 22:13:25 +08:00
rhgndf
b160a49601
Initial GAL18V10 support
2023-10-30 16:47:27 +08:00
ole00
b498bc73f3
PC app: fix prompt detection.
...
It should improve detection of Afterburner presence during start.
2023-10-14 21:15:39 +01:00
ole00
8b82d0ea0e
Increased version to 0.5.3
2023-10-02 22:41:13 +01:00
rhgndf
39b27c3cac
Add progress bar for uploading fuses
2023-10-02 00:03:49 +08:00
rhgndf
7b08a1a749
Initial GAL6001/GAL6002 support
2023-09-22 23:32:15 +08:00
rhgndf
4145612445
Do not match unknown gal
2023-09-17 12:20:15 +08:00
rhgndf
82b6691bba
Support GAL20XV10
2023-09-17 12:20:08 +08:00
ole00
7d332acae6
PC app: support for new board design
...
Added:
* detection of the new board design
* VPP measurement (use 'm' commands)
* setting of calibration offset (use '-co' parameter)
2023-04-07 19:16:41 +01:00
ole00
1a3a009885
PC app: added support for erase-all and write-pes commands
2023-03-30 23:34:23 +01:00
ole00
e9d005213e
Added support for Power-Down pin on ATF16V8C
...
The PD feature is now selectively enabled or disabled based
on the JED contents. Also, when fuses are read the printout
of the JED file reflects the PD fuse bit state. So, when
the PD fuse bit is enabled then the JED file contains an extra
fuse bit set to 1. The ATF22V10C now behaves the same way regarding
the PD fuse bit (previously Afterburner always disabled the PD
function).
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
317b3520d8
Added support for securing/protecting the GAL
...
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
ffa637eb8e
PC app: lunx serial port read tweak
...
This change seems to fix a weird issue where some of the lines were split
in two lines. This could be reproduced when using 'i' command with ATF22V10C
or ATF16V8B repeatedly.
2023-03-21 23:23:24 +00:00
ole00
39fe8258db
help: changed the afterburner's url
2022-04-22 19:54:32 +01:00
ole00
d518805925
serial port: support for keeping the port always opened
...
Closing serial port causes Arduino reset on Mac OSX.
2022-04-22 19:49:58 +01:00
ole00
b5d6fa6683
version 0.4 - baud rate changed to 57600. Please re-upload .ino sketch.
...
After testing with genuine arduino uno I could not make
it to work reliably using the original baudrate 38400 on
Windows 7. Linux worked OK, but Windows 7 inserted extra 2
bytes 0xFE or 0xFF at the beginnig of the serial communication
(at least that's what arduino read from the serial line).
Baudrate 57600 so far had no issue, another reliable option
seem to be 9600.
2022-04-01 22:15:48 +01:00
ole00
443072e423
pc app: fixed detection of serial prompt
2022-04-01 17:49:09 +01:00
ole00
935d52e12b
moved the PC app source to the src_pc directory
...
This fixes an issue with Arduino IDE which opens all .c files
(even unrelated) in the same directory when the .ino file is opened.
Fixes compilation error described in issue #10
2021-06-22 19:53:40 +01:00
