mirror of
https://github.com/ole00/afterburner.git
synced 2024-11-22 21:32:09 +00:00
aa53a480e7
* use OpenScad to open the design .scad file * the design file contains top part, bottom part and on/off switch * .stl files are exported for your convenience * .stl files can also be exported from OpenScad.
474 lines
19 KiB
OpenSCAD
474 lines
19 KiB
OpenSCAD
// Arduino connectors library
|
|
//
|
|
// Copyright (c) 2013 Kelly Egan
|
|
//
|
|
// The MIT License (MIT)
|
|
//
|
|
// Permission is hereby granted, free of charge, to any person obtaining a copy of this software
|
|
// and associated documentation files (the "Software"), to deal in the Software without restriction,
|
|
// including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
// and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do
|
|
// so, subject to the following conditions:
|
|
//
|
|
// The above copyright notice and this permission notice shall be included in all copies or substantial
|
|
// portions of the Software.
|
|
//
|
|
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
|
|
// NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
|
|
// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
// WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
//
|
|
// https://github.com/kellyegan/OpenSCAD-Arduino-Mounting-Library
|
|
|
|
//use <pin_connectors/pins.scad>
|
|
|
|
//Constructs a roughed out arduino board
|
|
//Current only USB, power and headers
|
|
module arduino(boardType = UNO, useColors = true) {
|
|
//The PCB with holes
|
|
if (useColors) difference() {
|
|
color("SteelBlue") boardShape( boardType );
|
|
translate([0,0,-pcbHeight * 0.5]) holePlacement(boardType = boardType)
|
|
color("SteelBlue") cylinder(r = mountingHoleRadius, h = pcbHeight * 2, $fn=32);
|
|
} else difference() {
|
|
boardShape( boardType );
|
|
translate([0,0,-pcbHeight * 0.5]) holePlacement(boardType = boardType)
|
|
cylinder(r = mountingHoleRadius, h = pcbHeight * 2, $fn=32);
|
|
}
|
|
|
|
//Add all components to board
|
|
components( boardType = boardType, component = ALL, useColors = useColors );
|
|
}
|
|
|
|
|
|
//Setting for enclosure mounting holes (Not Arduino mounting)
|
|
NOMOUNTINGHOLES = 0;
|
|
INTERIORMOUNTINGHOLES = 1;
|
|
EXTERIORMOUNTINGHOLES = 2;
|
|
|
|
|
|
//Offset from board. Negative values are insets
|
|
module boardShape( boardType = UNO, offset = 0, height = pcbHeight ) {
|
|
dimensions = boardDimensions(boardType);
|
|
|
|
xScale = (dimensions[0] + offset * 2) / dimensions[0];
|
|
yScale = (dimensions[1] + offset * 2) / dimensions[1];
|
|
|
|
translate([-offset, -offset, 0])
|
|
scale([xScale, yScale, 1.0])
|
|
linear_extrude(height = height)
|
|
polygon(points = boardShapes[boardType]);
|
|
}
|
|
|
|
//Create a bounding box around the board
|
|
//Offset - will increase the size of the box on each side,
|
|
//Height - overides the boardHeight and offset in the z direction
|
|
|
|
BOARD = 0; //Includes all components and PCB
|
|
PCB = 1; //Just the PCB
|
|
COMPONENTS = 2; //Just the components
|
|
|
|
module boundingBox(boardType = UNO, offset = 0, height = 0, cornerRadius = 0, include = BOARD) {
|
|
//What parts are included? Entire board, pcb or just components.
|
|
pos = ([boardPosition(boardType), pcbPosition(boardType), componentsPosition(boardType)])[include];
|
|
dim = ([boardDimensions(boardType), pcbDimensions(boardType), componentsDimensions(boardType)])[include];
|
|
|
|
//Depending on if height is set position and dimensions will change
|
|
position = [
|
|
pos[0] - offset,
|
|
pos[1] - offset,
|
|
(height == 0 ? pos[2] - offset : pos[2] )
|
|
];
|
|
|
|
dimensions = [
|
|
dim[0] + offset * 2,
|
|
dim[1] + offset * 2,
|
|
(height == 0 ? dim[2] + offset * 2 : height)
|
|
];
|
|
|
|
translate( position ) {
|
|
if( cornerRadius == 0 ) {
|
|
cube( dimensions );
|
|
} else {
|
|
roundedCube( dimensions, cornerRadius=cornerRadius );
|
|
}
|
|
}
|
|
}
|
|
|
|
//Creates standoffs for different boards
|
|
TAPHOLE = 0;
|
|
PIN = 1;
|
|
|
|
module standoffs(
|
|
boardType = UNO,
|
|
height = 10,
|
|
topRadius = mountingHoleRadius + 1,
|
|
bottomRadius = mountingHoleRadius + 2,
|
|
holeRadius = mountingHoleRadius,
|
|
mountType = TAPHOLE
|
|
) {
|
|
|
|
holePlacement(boardType = boardType)
|
|
union() {
|
|
difference() {
|
|
cylinder(r1 = bottomRadius, r2 = topRadius, h = height, $fn=32);
|
|
if( mountType == TAPHOLE ) {
|
|
cylinder(r = holeRadius, h = height * 4, center = true, $fn=32);
|
|
}
|
|
}
|
|
if( mountType == PIN ) {
|
|
translate([0, 0, height - 1])
|
|
pintack( h=pcbHeight + 3, r = holeRadius, lh=3, lt=1, bh=1, br=topRadius );
|
|
}
|
|
}
|
|
}
|
|
|
|
//This is used for placing the mounting holes and for making standoffs
|
|
//child elements will be centered on that chosen boards mounting hole centers
|
|
module holePlacement(boardType = UNO ) {
|
|
for(i = boardHoles[boardType] ) {
|
|
translate(i)
|
|
children(0);
|
|
}
|
|
}
|
|
|
|
//Places components on board
|
|
// compenent - the data set with a particular component (like boardHeaders)
|
|
// extend - the amount to extend the component in the direction of its socket
|
|
// offset - the amount to increase the components other two boundaries
|
|
|
|
//Component IDs
|
|
ALL = -1;
|
|
HEADER_F = 0;
|
|
HEADER_M = 1;
|
|
USB = 2;
|
|
POWER = 3;
|
|
RJ45 = 4;
|
|
|
|
module components( boardType = UNO, component = ALL, extension = 0, offset = 0, useColors = false ) {
|
|
translate([0, 0, pcbHeight]) {
|
|
for( i = [0:len(components[boardType]) - 1] ){
|
|
if( components[boardType][i][3] == component || component == ALL) {
|
|
//Calculates position + adjustment for offset and extention
|
|
position = components[boardType][i][0]
|
|
- (([1,1,1] - components[boardType][i][2]) * offset)
|
|
+ [ min(components[boardType][i][2][0],0), min(components[boardType][i][2][1],0), min(components[boardType][i][2][2],0) ]
|
|
* extension;
|
|
//Calculates the full box size including offset and extention
|
|
dimensions = components[boardType][i][1]
|
|
+ ((components[boardType][i][2] * [1,1,1])
|
|
* components[boardType][i][2]) * extension
|
|
+ ([1,1,1] - components[boardType][i][2]) * offset * 2;
|
|
translate( position ) {
|
|
if (useColors) color( components[boardType][i][4] ) cube( dimensions );
|
|
if (!useColors) cube( dimensions );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module roundedCube( dimensions = [10,10,10], cornerRadius = 1, faces=32 ) {
|
|
hull() cornerCylinders( dimensions = dimensions, cornerRadius = cornerRadius, faces=faces );
|
|
}
|
|
|
|
module cornerCylinders( dimensions = [10,10,10], cornerRadius = 1, faces=32 ) {
|
|
translate([ cornerRadius, cornerRadius, 0]) {
|
|
cylinder( r = cornerRadius, $fn = faces, h = dimensions[2] );
|
|
translate([dimensions[0] - cornerRadius * 2, 0, 0]) cylinder( r = cornerRadius, $fn = faces, h = dimensions[2] );
|
|
translate([0, dimensions[1] - cornerRadius * 2, 0]) {
|
|
cylinder( r = cornerRadius, $fn = faces, h = dimensions[2] );
|
|
translate([dimensions[0] - cornerRadius * 2, 0, 0]) cylinder( r = cornerRadius, $fn = faces, h = dimensions[2] );
|
|
}
|
|
}
|
|
}
|
|
|
|
//Create a clip that snapps into a clipHole
|
|
module clip(clipWidth = 5, clipDepth = 5, clipHeight = 5, lipDepth = 1.5, lipHeight = 3) {
|
|
translate([-clipWidth/2,-(clipDepth-lipDepth),0]) rotate([90, 0, 90])
|
|
linear_extrude(height = clipWidth, convexity = 10)
|
|
polygon( points=[ [0, 0],
|
|
[clipDepth - lipDepth, 0],
|
|
[clipDepth - lipDepth, clipHeight - lipHeight],
|
|
[clipDepth - 0.25, clipHeight - lipHeight],
|
|
[clipDepth, clipHeight - lipHeight + 0.25],
|
|
[clipDepth - lipDepth * 0.8, clipHeight],
|
|
[(clipDepth - lipDepth) * 0.3, clipHeight]
|
|
],
|
|
paths=[[0,1,2,3,4,5,6,7]]
|
|
);
|
|
}
|
|
|
|
//Hole for clip
|
|
module clipHole(clipWidth = 5, clipDepth = 5, clipHeight = 5, lipDepth = 1.5, lipHeight = 3, holeDepth = 5) {
|
|
offset = 0.1;
|
|
translate([-clipWidth/2,-(clipDepth-lipDepth),0])
|
|
translate([-offset, clipDepth - lipDepth-offset, clipHeight - lipHeight - offset])
|
|
cube( [clipWidth + offset * 2, holeDepth, lipHeight + offset * 2] );
|
|
}
|
|
|
|
module mountingHole(screwHeadRad = woodscrewHeadRad, screwThreadRad = woodscrewThreadRad, screwHeadHeight = woodscrewHeadHeight, holeDepth = 10) {
|
|
union() {
|
|
translate([0, 0, -0.01])
|
|
cylinder( r = screwThreadRad, h = 1.02, $fn = 32 );
|
|
translate([0, 0, 1])
|
|
cylinder( r1 = screwThreadRad, r2 = screwHeadRad, h = screwHeadHeight, $fn = 32 );
|
|
translate([0, 0, screwHeadHeight - 0.01 + 1])
|
|
cylinder( r = screwHeadRad, h = holeDepth - screwHeadHeight + 0.02, $fn = 32 );
|
|
}
|
|
}
|
|
|
|
/******************************** UTILITY FUNCTIONS *******************************/
|
|
|
|
//Return the length side of a square given its diagonal
|
|
function sides( diagonal ) = sqrt(diagonal * diagonal / 2);
|
|
|
|
//Return the minimum values between two vectors of either length 2 or 3. 2D Vectors are treated as 3D vectors who final value is 0.
|
|
function minVec( vector1, vector2 ) =
|
|
[min(vector1[0], vector2[0]), min(vector1[1], vector2[1]), min((vector1[2] == undef ? 0 : vector1[2]), (vector2[2] == undef ? 0 : vector2[2]) )];
|
|
|
|
//Return the maximum values between two vectors of either length 2 or 3. 2D Vectors are treated as 3D vectors who final value is 0.
|
|
function maxVec( vector1, vector2 ) =
|
|
[max(vector1[0], vector2[0]), max(vector1[1], vector2[1]), max((vector1[2] == undef ? 0 : vector1[2]), (vector2[2] == undef ? 0 : vector2[2]) )];
|
|
|
|
//Determine the minimum point on a component in a list of components
|
|
function minCompPoint( list, index = 0, minimum = [10000000, 10000000, 10000000] ) =
|
|
index >= len(list) ? minimum : minCompPoint( list, index + 1, minVec( minimum, list[index][0] ));
|
|
|
|
//Determine the maximum point on a component in a list of components
|
|
function maxCompPoint( list, index = 0, maximum = [-10000000, -10000000, -10000000] ) =
|
|
index >= len(list) ? maximum : maxCompPoint( list, index + 1, maxVec( maximum, list[index][0] + list[index][1]));
|
|
|
|
//Determine the minimum point in a list of points
|
|
function minPoint( list, index = 0, minimum = [10000000, 10000000, 10000000] ) =
|
|
index >= len(list) ? minimum : minPoint( list, index + 1, minVec( minimum, list[index] ));
|
|
|
|
//Determine the maximum point in a list of points
|
|
function maxPoint( list, index = 0, maximum = [-10000000, -10000000, -10000000] ) =
|
|
index >= len(list) ? maximum : maxPoint( list, index + 1, maxVec( maximum, list[index] ));
|
|
|
|
//Returns the pcb position and dimensions
|
|
function pcbPosition(boardType = UNO) = minPoint(boardShapes[boardType]);
|
|
function pcbDimensions(boardType = UNO) = maxPoint(boardShapes[boardType]) - minPoint(boardShapes[boardType]) + [0, 0, pcbHeight];
|
|
|
|
//Returns the position of the box containing all components and its dimensions
|
|
function componentsPosition(boardType = UNO) = minCompPoint(components[boardType]) + [0, 0, pcbHeight];
|
|
function componentsDimensions(boardType = UNO) = maxCompPoint(components[boardType]) - minCompPoint(components[boardType]);
|
|
|
|
//Returns the position and dimensions of the box containing the pcb board
|
|
function boardPosition(boardType = UNO) =
|
|
minCompPoint([[pcbPosition(boardType), pcbDimensions(boardType)], [componentsPosition(boardType), componentsDimensions(boardType)]]);
|
|
function boardDimensions(boardType = UNO) =
|
|
maxCompPoint([[pcbPosition(boardType), pcbDimensions(boardType)], [componentsPosition(boardType), componentsDimensions(boardType)]])
|
|
- minCompPoint([[pcbPosition(boardType), pcbDimensions(boardType)], [componentsPosition(boardType), componentsDimensions(boardType)]]);
|
|
|
|
/******************************* BOARD SPECIFIC DATA ******************************/
|
|
//Board IDs
|
|
NG = 0;
|
|
DIECIMILA = 1;
|
|
DUEMILANOVE = 2;
|
|
UNO = 3;
|
|
LEONARDO = 4;
|
|
MEGA = 5;
|
|
MEGA2560 = 6;
|
|
DUE = 7;
|
|
YUN = 8;
|
|
INTELGALILEO = 9;
|
|
TRE = 10;
|
|
ETHERNET = 11;
|
|
|
|
/********************************** MEASUREMENTS **********************************/
|
|
pcbHeight = 1.7;
|
|
headerWidth = 2.54;
|
|
headerHeight = 9;
|
|
mountingHoleRadius = 3.2 / 2;
|
|
|
|
ngWidth = 53.34;
|
|
leonardoDepth = 68.58 + 1.1; //PCB depth plus offset of USB jack (1.1)
|
|
ngDepth = 68.58 + 6.5;
|
|
megaDepth = 101.6 + 6.5; //Coding is my business and business is good!
|
|
dueDepth = 101.6 + 1.1;
|
|
|
|
arduinoHeight = 11 + pcbHeight + 0;
|
|
|
|
/********************************* MOUNTING HOLES *********************************/
|
|
|
|
//Duemilanove, Diecimila, NG and earlier
|
|
ngHoles = [
|
|
[ 2.54, 15.24 ],
|
|
[ 17.78, 66.04 ],
|
|
[ 45.72, 66.04 ]
|
|
];
|
|
|
|
//Uno, Leonardo holes
|
|
unoHoles = [
|
|
[ 2.54, 15.24 ],
|
|
[ 17.78, 66.04 ],
|
|
[ 45.72, 66.04 ],
|
|
[ 50.8, 13.97 ]
|
|
];
|
|
|
|
//Due and Mega 2560
|
|
dueHoles = [
|
|
[ 2.54, 15.24 ],
|
|
[ 17.78, 66.04 ],
|
|
[ 45.72, 66.04 ],
|
|
[ 50.8, 13.97 ],
|
|
[ 2.54, 90.17 ],
|
|
[ 50.8, 96.52 ]
|
|
];
|
|
|
|
// Original Mega holes
|
|
megaHoles = [
|
|
[ 2.54, 15.24 ],
|
|
[ 50.8, 13.97 ],
|
|
[ 2.54, 90.17 ],
|
|
[ 50.8, 96.52 ]
|
|
];
|
|
|
|
boardHoles = [
|
|
ngHoles, //NG
|
|
ngHoles, //Diecimila
|
|
ngHoles, //Duemilanove
|
|
unoHoles, //Uno
|
|
unoHoles, //Leonardo
|
|
megaHoles, //Mega
|
|
dueHoles, //Mega 2560
|
|
dueHoles, //Due
|
|
0, //Yun
|
|
0, //Intel Galileo
|
|
0, //Tre
|
|
unoHoles //Ethernet
|
|
];
|
|
|
|
/********************************** BOARD SHAPES **********************************/
|
|
ngBoardShape = [
|
|
[ 0.0, 0.0 ],
|
|
[ 53.34, 0.0 ],
|
|
[ 53.34, 66.04 ],
|
|
[ 50.8, 66.04 ],
|
|
[ 48.26, 68.58 ],
|
|
[ 15.24, 68.58 ],
|
|
[ 12.7, 66.04 ],
|
|
[ 1.27, 66.04 ],
|
|
[ 0.0, 64.77 ]
|
|
];
|
|
|
|
megaBoardShape = [
|
|
[ 0.0, 0.0 ],
|
|
[ 53.34, 0.0 ],
|
|
[ 53.34, 99.06 ],
|
|
[ 52.07, 99.06 ],
|
|
[ 49.53, 101.6 ],
|
|
[ 15.24, 101.6 ],
|
|
[ 12.7, 99.06 ],
|
|
[ 2.54, 99.06 ],
|
|
[ 0.0, 96.52 ]
|
|
];
|
|
|
|
boardShapes = [
|
|
ngBoardShape, //NG
|
|
ngBoardShape, //Diecimila
|
|
ngBoardShape, //Duemilanove
|
|
ngBoardShape, //Uno
|
|
ngBoardShape, //Leonardo
|
|
megaBoardShape, //Mega
|
|
megaBoardShape, //Mega 2560
|
|
megaBoardShape, //Due
|
|
0, //Yun
|
|
0, //Intel Galileo
|
|
0, //Tre
|
|
ngBoardShape //Ethernet
|
|
];
|
|
|
|
/*********************************** COMPONENTS ***********************************/
|
|
|
|
//Component data.
|
|
//[position, dimensions, direction(which way would a cable attach), type(header, usb, etc.), color]
|
|
ngComponents = [
|
|
[[1.27, 17.526, 0], [headerWidth, headerWidth * 10, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 26.67, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 6, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[9.34, -6.5, 0],[12, 16, 11],[0, -1, 0], USB, "LightGray" ],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
etherComponents = [
|
|
[[1.27, 17.526, 0], [headerWidth, headerWidth * 10, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 26.67, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 6, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[7.20, -4.4, 0],[16, 22, 13],[0, -1, 0], RJ45, "Green" ],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
leonardoComponents = [
|
|
[[1.27, 17.526, 0], [headerWidth, headerWidth * 10, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 26.67, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 6, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[11.5, -1.1, 0],[7.5, 5.9, 3],[0, -1, 0], USB, "LightGray" ],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
megaComponents = [
|
|
[[1.27, 22.86, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 67.31, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 31.75, 0], [headerWidth, headerWidth * 6, headerHeight ], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 72.39, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 92.71, 0], [headerWidth * 18, headerWidth * 2, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[9.34, -6.5, 0],[12, 16, 11],[0, -1, 0], USB, "LightGray"],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
mega2560Components = [
|
|
[[1.27, 17.526, 0], [headerWidth, headerWidth * 10, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 67.31, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 26.67, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[49.53, 72.39, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[1.27, 92.71, 0], [headerWidth * 18, headerWidth * 2, headerHeight], [0, 0, 1], HEADER_F, "Black" ],
|
|
[[9.34, -6.5, 0],[12, 16, 11],[0, -1, 0], USB, "LightGray" ],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
dueComponents = [
|
|
[[1.27, 17.526, 0], [headerWidth, headerWidth * 10, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 44.45, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 67.31, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 26.67, 0], [headerWidth, headerWidth * 8, headerHeight ], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 49.53, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[49.53, 72.39, 0], [headerWidth, headerWidth * 8, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[1.27, 92.71, 0], [headerWidth * 18, headerWidth * 2, headerHeight], [0, 0, 1], HEADER_F, "Black"],
|
|
[[11.5, -1.1, 0], [7.5, 5.9, 3], [0, -1, 0], USB, "LightGray" ],
|
|
[[27.365, -1.1, 0], [7.5, 5.9, 3], [0, -1, 0], USB, "LightGray" ],
|
|
[[40.7, -1.8, 0], [9.0, 13.2, 10.9], [0, -1, 0], POWER, "Black" ]
|
|
];
|
|
|
|
components = [
|
|
ngComponents, //NG
|
|
ngComponents, //Diecimila
|
|
ngComponents, //Duemilanove
|
|
ngComponents, //Uno
|
|
leonardoComponents, //Leonardo
|
|
megaComponents, //Mega
|
|
mega2560Components, //Mega 2560
|
|
dueComponents, //Due
|
|
0, //Yun
|
|
0, //Intel Galileo
|
|
0, //Tre
|
|
etherComponents //Ethernet
|
|
];
|
|
|
|
/****************************** NON-BOARD PARAMETERS ******************************/
|
|
|
|
//Mounting holes
|
|
woodscrewHeadRad = 4.6228; //Number 8 wood screw head radius
|
|
woodscrewThreadRad = 2.1336; //Number 8 wood screw thread radius
|
|
woodscrewHeadHeight = 2.8448; //Number 8 wood screw head height
|