afterburner/afterburner.ino
2019-03-16 10:54:24 +00:00

1511 lines
38 KiB
C++

/*
(banner font: aciiart.eu)
_____________________________________________________________
| _ __ _ _ \
| / \ / _| |_ ___ _ _| |__ _ _ _ __ ___ ___ _ _ |\
| / _ \| |_| '_/ _ \| '_/ '_ \| | | | '_/ _ \/ _ \| '_/ ||
| / ___ \ _| |_| __/| | | |_) | |_| | | | | | | __/| | ||
| /_/ \_\| \__\___||_| |____/\___,_|_| |_| |_|___||_| ||
\_____________________________________________________________||
'------------------------------------------------------------'
Afterburner: GAL IC Programmer for Arduino by -= olin =-
Based on ATFblast 3.1 by Bruce Abbott
http://www.bhabbott.net.nz/atfblast.html
Based on GALBLAST by Manfred Winterhoff
http://www.armory.com/%7Erstevew/Public/Pgmrs/GAL/_ClikMe1st.htm
Supports:
* National GAL16V8
* Lattice GAL16V8A, GAL16V8B, GAL16V8D
* Lattice GAL22V10B
* Atmel ATF16V8B, ATF22V10B, ATF22V10CQZ
Requires:
* afterburner PC program to upload JED fuse map, erase, read etc.
* simple programming circuit. See: http://molej.cz/index_aft.html
Changelog:
* 2019.02.02 - initial version 0.1
*/
#define VERSION "0.1"
//ARDUINO UNO pin mapping
// GAL PIN NAME | ARDUINO UNO PIN NUMBER
//programing voltage control pin
#define PIN_VPP 11
#define PIN_SDOUT 12
#define PIN_STROBE 13
#define PIN_PV 9
#define PIN_SDIN 8
#define PIN_RA0 10
#define PIN_RA1 2
#define PIN_RA2 3
#define PIN_RA3 4
#define PIN_RA4 5
#define PIN_RA5 6
#define PIN_SCLK 7
#define COMMAND_NONE 0
#define COMMAND_UNKNOWN 1
#define COMMAND_IDENTIFY_PROGRAMMER '*'
#define COMMAND_HELP 'h'
#define COMMAND_UPLOAD 'u'
#define COMMAND_DEBUG 'd'
#define COMMAND_READ_PES 'p'
#define COMMAND_READ_FUSES 'r'
#define COMMAND_WRITE_FUSES 'w'
#define COMMAND_VERIFY_FUSES 'v'
#define COMMAND_ERASE_GAL 'c'
#define COMMAND_UTX '#'
#define COMMAND_ECHO 'e'
#define COMMAND_TEST_VOLTAGE 't'
#define READGAL 0
#define VERIFYGAL 1
#define READPES 2
#define SCLKTEST 3
#define WRITEGAL 4
#define ERASEGAL 5
#define ERASEALL 6
#define BURNSECURITY 7
#define WRITEPES 8
#define VPPTEST 9
#define INIT 100
// contents of pes[3]
// Atmel PES is text string eg. 1B8V61F1 or 3Z01V22F1
// ^ ^
#define LATTICE 0xA1
#define NATIONAL 0x8F
#define SGSTHOMSON 0x20
#define ATMEL16 'V'
#define ATMEL22 '3'
typedef enum {
UNKNOWN,
GAL16V8,
GAL20V8,
GAL22V10,
ATF16V8B,
ATF22V10B,
ATF22V10C
} GALTYPE;
// config bit numbers
#define CFG_BASE_16 2048
#define CFG_BASE_20 2560
#define CFG_BASE_22 5808
// common CFG fuse address map for cfg16V8 and cfg20V8
// the only difference is the starting address: 2048 for cfg16V8 and 2560 for cfg20V8
// total size: 82
static const unsigned char cfgV8[]=
{
80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,
0,1,2,3,
145,
72,73,74,75,76,77,78,79,
144,
4,5,6,7,
112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,
};
// common CFG fuse address map for cfg16V8AB and cfg20V8AB
// the only difference is the starting address: 2048 for cfg16V8AB and 2560 for cfg20V8AB
// total size: 82
static const unsigned char cfgV8AB[]=
{
0,1,2,3,
145,
72,73,74,75,
80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,
76,77,78,79,
144,
4,5,6,7,
};
// common CFG fuse address map for cfg22V10
// starting address: 5808
static const unsigned char cfgV10[]=
{
1,0,3,2,5,4,7,6,9,8,11,10,13,12,15,14,17,16,19,18,
};
// UES user electronic signature
// PES programmer electronic signature (ATF = text string, others = Vendor/Vpp/timing)
// cfg configuration bits for OLMCs
// GAL info
static struct
{
GALTYPE type;
unsigned char id0,id1; /* variant 1, variant 2 (eg. 16V8=0x00, 16V8A+=0x1A)*/
const char *name; /* pointer to chip name */
short fuses; /* total number of fuses */
char pins; /* number of pins on chip */
char rows; /* number of fuse rows */
unsigned char bits; /* number of fuses per row */
char uesrow; /* UES row number */
short uesfuse; /* first UES fuse number */
char uesbytes; /* number of UES bytes */
char eraserow; /* row adddeess for erase */
char eraseallrow; /* row address for erase all */
char pesrow; /* row address for PES read/write */
char pesbytes; /* number of PES bytes */
char cfgrow; /* row address of config bits */
unsigned short cfgbase; /* base address of the config bit numbers */
const unsigned char *cfg; /* pointer to config bit numbers */
unsigned char cfgbits; /* number of config bits */
}
galinfo[]=
{
// + fuses + bits +uesbytes +pesrow +cfgbase
// | +pins | +uesrow | +eraserow| +pesbytes | +cfg
// +-- type + id0 + id1 +- name | | +rows | | +uesfuse | +eraseallrow +cfgrow | | + cfgbits
// | | | | | | | | | | | | | | | | | | |
{UNKNOWN, 0x00, 0x00, "unknown", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, NULL, 0},
{GAL16V8, 0x00, 0x1A, "GAL16V8", 2194, 20, 32, 64, 32, 2056, 8, 63, 54, 58, 8, 60, CFG_BASE_16, cfgV8AB, sizeof(cfgV8AB)},
{GAL20V8, 0x20, 0x3A, "GAL20V8", 2706, 24, 40, 64, 40, 2568, 8, 63, 59, 58, 8, 60, CFG_BASE_20, cfgV8AB, sizeof(cfgV8AB)},
{GAL22V10, 0x48, 0x49, "GAL22V10", 5892, 24, 44, 132, 44, 5828, 8, 61, 60, 58, 10, 16, CFG_BASE_22, cfgV10, sizeof(cfgV10)},
{ATF16V8B, 0x00, 0x00, "ATF16V8B", 2194, 20, 32, 64, 32, 2056, 8, 63, 54, 58, 8, 60, CFG_BASE_16, cfgV8AB, sizeof(cfgV8AB)},
{ATF22V10B, 0x00, 0x00, "ATF22V10B",5892, 24, 44, 132, 44, 5828, 8, 61, 60, 58, 10, 16, CFG_BASE_22, cfgV10, sizeof(cfgV10)},
{ATF22V10C, 0x00, 0x00, "ATF22V10C",5892, 24, 44, 132, 44, 5828, 8, 61, 60, 58, 10, 16, CFG_BASE_22, cfgV10, sizeof(cfgV10)},
};
// MAXFUSES calculated as the biggest required space to hold the fuse bitmap + UES bitmap + CFG bitmap
// MAXFUSES = ((132 * 44 bits) / 8) + uesbytes + (20 / 8)
// 726 + 8 + 3
#define MAXFUSES 737
GALTYPE gal; //the gal device index pointing to galinfo
static short security = 0, erasetime = 0, progtime = 0, vpp = 0;
char echoEnabled;
unsigned char pes[12];
char line[64];
char programName[32];
short lineIndex;
char endOfLine;
char mapUploaded;
char isUploading;
unsigned char fusemap[MAXFUSES];
static void setFuseBit(unsigned short bitPos);
static unsigned short checkSum(unsigned short n);
static char checkGalTypeViaPes(void);
static void turnOff(void);
// print some help on the serial console
void printHelp(char full) {
Serial.println(F("AFTerburner v." VERSION));
if (!full) {
Serial.println(F("type 'h' for help"));
return;
}
Serial.println(F("commands:"));
Serial.println(F(" h - print help"));
Serial.println(F(" e - toggle echo"));
Serial.println(F(" p - read & print PES"));
Serial.println(F(" r - read & print fuses"));
Serial.println(F(" u - upload fuses"));
Serial.println(F(" w - write uploaded fuses"));
Serial.println(F(" v - verify fuses"));
Serial.println(F(" c - erase chip"));
Serial.println(F(" t - test VPP"));
}
// setup the Arduino board
void setup() {
// initialize serial:
Serial.begin(38400);
isUploading = 0;
endOfLine = 0;
gal = ATF16V8B;
echoEnabled = 0;
mapUploaded = 0;
// Serial output from the GAL chip, input for Arduino
pinMode(PIN_SDOUT, INPUT);
// Serial input of the GAL chip, output from Arduino
pinMode(PIN_SDIN, OUTPUT);
pinMode(PIN_STROBE, OUTPUT);
pinMode(PIN_PV, OUTPUT);
pinMode(PIN_RA0, OUTPUT);
pinMode(PIN_RA1, OUTPUT);
pinMode(PIN_RA2, OUTPUT);
pinMode(PIN_RA3, OUTPUT);
pinMode(PIN_RA4, OUTPUT);
pinMode(PIN_RA5, OUTPUT);
pinMode(PIN_SCLK, OUTPUT);
pinMode(PIN_VPP, OUTPUT);
// Important - the output pins should be kept high.
// TurnOff function does that (keeps pin high).
turnOff();
printHelp(0);
Serial.println(">");
}
// read from serial line and discard the data
void readGarbage() {
while (Serial.available() > 0) {
Serial.read();
}
}
// Reads input from the serial terminal and returns the command
// which is the first character of the entered text.
char handleTerminalCommands() {
char c;
while (Serial.available() > 0) {
c = Serial.read();
line[lineIndex] = c;
if (c == '\n' || c == '\r') {
endOfLine = 1;
}
//echo input to output
else {
if (!isUploading && echoEnabled) {
Serial.print(c);
}
}
if (lineIndex >= 62) {
lineIndex = 0;
readGarbage();
Serial.println();
Serial.println("Error: line too long.");
} else {
lineIndex++;
}
}
if (endOfLine) {
c = COMMAND_NONE;
//single letter command entered
if (lineIndex == 2) {
c = line[0];
} else if (lineIndex > 2) {
c = line[0];
if (!isUploading || c != '#') {
c = COMMAND_UNKNOWN;
}
}
if (!isUploading) {
Serial.println();
line[lineIndex] = 0;
lineIndex = 0;
}
endOfLine = 0;
return c;
}
return COMMAND_NONE;
}
// Parses decimal integer number typed as 4 digit.
// Returns the number value.
unsigned short parse4dec(char i) {
unsigned short v = (line[i++] - '0') * 1000;
v += (line[i++] - '0') * 100;
v += (line[i++] - '0') * 10;
v += line[i] - '0';
return v;
}
// Converts textual hex value 0-9, A-F to a number.
unsigned char toHex(char c) {
if (c >= '0' && c <= '9') return c - '0';
if (c >= 'A' && c <= 'F') return c - 'A' + 10;
if (c >= 'a' && c <= 'f') return c - 'a' + 10;
return 0;
}
// Parses hexdecimal integer number typed as 2 digit.
// Returns the number value.
unsigned short parse2hex(char i) {
if (line[i] == '\r' || line[i] == 0 || line[i] == ' ') {
return -1;
}
unsigned short v = toHex(line[i++]) << 4;
return v + toHex(line[i]);
}
// Parses hexdecimal integer number typed as 4 digit.
// Returns the number value.
unsigned short parse4hex(char i) {
if (line[i] == '\r' || line[i] == 0 || line[i] == ' ') {
return -1;
}
unsigned short v = ((unsigned short)toHex(line[i++])) << 12;
v |= ((unsigned short)toHex(line[i++])) << 8;
v |= toHex(line[i++]) << 4;
return v + toHex(line[i]);
}
// Parses a line fed by the serial connection.
// This hnadles a primitive upload protocol that
// expects a programatic data feed - not suitable
// for human interaction.
// Data: each command on its own line
// line starts with '#' character followed by a command
// and a space. Then a command specific data follow.
// Commands:
// t <gal index>: gal type index to the GALTYPEE enum
// f <fuse index> <row>: row of fuse-map data starting on fuse bit index
// c <checksum> : checksum of the whole fuse map
// e : end ofthe upload transfer - returns to terminal
void parseUploadLine() {
switch (line[1]) {
case 'e': {
Serial.println("upload finished");
isUploading = 0;
} break;
// gal type
case 't': {
short v = line[3] - '0';
if (v > 0 && v <= (short)ATF22V10C) {
gal = (GALTYPE) v;
Serial.print(F("OK gal set: "));
Serial.println((short) gal, DEC);
} else {
Serial.println(F("ER unknown gal index"));
}
} break;
//fusemap data
case 'f': {
char i = 8;
char j;
unsigned short addr = parse4dec(3);
short v;
do {
v = parse2hex(i);
if (v >= 0) {
for (j = 0; j < 8; j++) {
// if fuse bit is set -> then change the fusemap
if (v & (1 << j)) {
setFuseBit(addr);
}
addr++;
}
i += 2;
}
} while (v >= 0);
//any fuse being set is considered as uploaded fuse map
mapUploaded = 1;
Serial.print(F("OK "));
Serial.println((short) addr, DEC);
} break;
//checksum
case 'c': {
unsigned short val = parse4hex(3);
unsigned short cs = checkSum(galinfo[gal].fuses);
if (cs == val) {
Serial.println(F("OK"));
} else {
Serial.print(F("ER checksum:"));
Serial.print(cs, HEX);
Serial.print(F(" expected:"));
Serial.println(val, HEX);
}
} break;
default: Serial.println(F("ER unknown upload cmd"));
}
lineIndex = 0;
}
// *********************************************************
// set/reset individual pins of GAL
static void setVCC(char on) {
//no control for turning the voltage on of
//it is assumed the voltage is always on
}
static void setVPP(char on) {
//programming voltage is controlled by VPP_PIN,
//but the programming voltage must be set manually by user turning a Pot
digitalWrite(PIN_VPP, on ? 1 : 0);
//Serial.print(F("VPP set to:"));
//Serial.println( on ? "12V": "5V");
delay(10);
}
static void setSTB(char on) {
digitalWrite(PIN_STROBE, on ? 1:0);
}
static void setPV(char on) {
digitalWrite(PIN_PV, on ? 1:0);
}
static void setSDIN(char on) {
digitalWrite(PIN_SDIN, on ? 1:0);
}
static void setSCLK(char on){
digitalWrite(PIN_SCLK, on ? 1:0);
}
// output row address (RA0-5)
static void setRow(char row)
{
digitalWrite(PIN_RA0, (row & 0x1));
digitalWrite(PIN_RA1, ((row & 0x2) ? 1:0));
digitalWrite(PIN_RA2, ((row & 0x4) ? 1:0));
digitalWrite(PIN_RA3, ((row & 0x8) ? 1:0));
digitalWrite(PIN_RA4, ((row & 0x10) ? 1:0));
digitalWrite(PIN_RA5, ((row & 0x20) ? 1:0));
}
// serial data out form the GAL chip -> received by Arduino
static char getSDOUT(void)
{
return digitalRead(PIN_SDOUT) != 0;
}
// GAL finish sequence
static void turnOff(void)
{
delay(100);
setPV(0); // P/V- low
setRow(0x3F);// RA0-5 high
setSDIN(1); // SDIN high
setVPP(0); // Vpp off (+12V)
setPV(1); // P/V- high
delay(2);
setVCC(0); // turn off VCC (if controlled)
}
// GAL init sequence
static void turnOn(char mode) {
if (
mode == WRITEGAL ||
mode == ERASEGAL ||
mode == ERASEALL ||
mode == BURNSECURITY ||
mode == WRITEPES ||
mode == VPPTEST ||
mode == READPES ||
mode == READGAL
) {
mode = 1;
} else {
mode = 0;
}
// setVPP(mode);
setVPP(0); // VPP off
setPV(0); // P/V- low
setRow(0x3F); // RA0-5 high - erase sequence ?
//setRow(0); // RA0-5 low
setSDIN(1); // SDIN high
setSCLK(1); // SCLK high
setSTB(1); // STB high
setVCC(1); // turn on VCC (if controlled)
delay(100);
setSCLK(0); // SCLK low
setVPP(mode);
delay(20);
}
// clock and receive a bit in from GAL SDOUT
static char receiveBit(void)
{
char b = getSDOUT();
setSCLK(1);
setSCLK(0);
return b;
}
// read n number of bits
static void discardBits(short n)
{
while (n-- > 0) {
receiveBit();
}
}
// clock a bit and send it out to GAL SDIN
static void sendBit(char bitValue)
{
setSDIN(bitValue);
setSCLK(1);
setSCLK(0);
}
// send n number of bits to GAL
static void sendBits(short n, char bitValue)
{
while (n-- > 0) {
sendBit(bitValue);
}
}
// send row address bits to SDIN
// ATF22V10C MSb first, other 22V10 LSb first
static void sendAddress(unsigned char n, unsigned char row)
{
switch (gal) {
case ATF22V10C:
while (n-- > 1) {
sendBit(row & 32); // clock in row number bits 5-1
row <<= 1;
}
setSDIN(row & 32); // SDIN = row number bit 0
break;
default:
while (n-- > 0) {
sendBit(row & 1); // clock in row number bits 0-5
row >>= 1;
}
setSDIN(0); // SDIN = low
}
}
// pulse STB pin low for some milliseconds
static void strobe(unsigned short msec)
{
setSTB(0);
delay(msec);
setSTB(1);
}
// 16V8, 20V8 RA0-5 = row address, strobe.
// 22V10 RA0-5 = 0, send row address (6 bits), strobe.
static void strobeRow(char row)
{
switch(gal) {
case GAL16V8:
case GAL20V8:
case ATF16V8B:
setRow(row); // set RA0-5 to row number
strobe(2); // pulse /STB for 2ms
break;
case GAL22V10:
case ATF22V10B:
case ATF22V10C:
setRow(0); // set RA0-5 low
sendAddress(6,row); // send row number (6 bits)
setSTB(0);
setSTB(1); // pulse /STB
setSDIN(0); // SDIN low
}
}
// read PES: programmer electronic signature (ATF = text string, others = Vendor/Vpp/timing)
void readPes() {
unsigned short bitmask;
short byteIndex;
turnOn(READPES);
strobeRow(galinfo[gal].pesrow);
for(byteIndex = 0; byteIndex < galinfo[gal].pesbytes; byteIndex++) {
unsigned char value = 0;
for (bitmask = 0x1; bitmask <= 0x80; bitmask <<= 1) {
if (receiveBit()) {
value |= bitmask;
}
}
pes[byteIndex] = value;
}
turnOff();
}
static unsigned char getDuration(unsigned char index) {
switch (index) {
case 0: return 1;
case 1: return 2;
case 2: return 5;
case 3: return 10;
case 4: return 20;
case 5: return 30;
case 6: return 40;
case 7: return 50;
case 8: return 60;
case 9: return 70;
case 10: return 80;
case 11: return 90;
case 12: return 100;
case 13: return 200;
default: return 0;
}
}
void parsePes(char type) {
unsigned char algo;
if (UNKNOWN == type) {
type = gal;
}
switch (type) {
case ATF16V8B:
progtime = 10;
erasetime = 100;
vpp = 40; /* 12.0V */
break;
case ATF22V10B:
case ATF22V10C:
progtime = 10;
erasetime = 100;
vpp = 48; /* 12.0V */
break;
default:
algo = pes[1] & 0x0F;
if (algo == 5) {
erasetime = (25 << ((pes[4] >> 2) &7)) / 2;
progtime = getDuration(((((unsigned short)pes[5] << 8)| pes[4]) >> 5) & 15);
vpp = 2 * ((pes[5] >> 1) & 31) + 20;
}
else switch(gal) {
case GAL16V8:
case GAL20V8:
erasetime=100;
switch(algo) {
case 0:
vpp = 63; // 15.75V
progtime = 100;
break;
case 1:
vpp = 63; // 15.75V
progtime = 80;
break;
case 2:
vpp = 66; // 16.5V
progtime = 10;
break;
case 3:
vpp = (pes[3] == NATIONAL) ? 60 : 58; // 15.0V or 14.5V
progtime = 40;
break;
case 4:
vpp = 56; // 14V
progtime = 100;
break;
}
break;
default:
erasetime = (pes[3] == NATIONAL) ? 50 : 100;
switch(algo) {
case 0:
vpp = 66; // 16.5V
progtime = 10;
break;
case 1:
vpp = 63; // 15.75V
progtime = 100;
break;
case 2:
vpp = (pes[3] == NATIONAL) ? 60 : 58; // 15.0V or 14.5V
progtime = 40;
break;
case 3:
vpp = 56; // 14V
progtime = 100;
break;
}
}
}
}
// print PES information
void printPes(char type) {
Serial.print(F("PES info: "));
//voltage
if (pes[3] == ATMEL16 || pes[3] == ATMEL22) {
//Serial.print(" ");
} else {
if (pes[1] & 0x10) {
Serial.print(F("3.3V "));
} else {
Serial.print(F("5V "));
}
}
//manufacturer
switch (pes[3]) {
case LATTICE: Serial.print(F("Lattice ")); break;
case NATIONAL: Serial.print(F("National ")); break;
case SGSTHOMSON: Serial.print(F("ST Microsystems ")); break;
case ATMEL16:
case ATMEL22: Serial.print(F("Atmel ")); break;
default: Serial.print(F("Unknown GAL, "));
}
// GAL type
switch (type) {
case GAL16V8: Serial.print(F("GAL16V8 ")); break;
case GAL20V8: Serial.print(F("GAL20V8 ")); break;
case GAL22V10: Serial.print(F("GAL20V10 ")); break;
case ATF16V8B: Serial.print(F("ATF16V8B ")); break;
case ATF22V10B: Serial.print(F("ATF22V10B ")); break;
case ATF22V10C: Serial.print(F("ATF22V10C ")); break;
}
//programming info
if (UNKNOWN != type) {
Serial.print(F(" VPP="));
Serial.print(vpp >> 2, DEC);
Serial.print(F("."));
Serial.print((vpp & 3) * 25, DEC);
Serial.print(F(" Timing: prog="));
Serial.print(progtime, DEC);
Serial.print(F(" erase="));
Serial.print(erasetime / 4, DEC);
} else {
Serial.print(F(" try VPP=10..14 in 1V steps"));
}
Serial.println();
}
// sets a fuse bit on particular position
// expects that the fusemap was cleared (set to zero) beforehand
static void setFuseBit(unsigned short bitPos) {
fusemap[bitPos >> 3] |= (1 << (bitPos & 7));
}
// gets a fuse bit from specific fuse position
static char getFuseBit(unsigned short bitPos) {
return (fusemap[bitPos >> 3] & (1 << (bitPos & 7))) ? 1 : 0;
}
// generic fuse-map reading, fuse-map bits are stored in fusemap array
static void readGalFuseMap(const unsigned char* cfgArray, char useDelay, char doDiscardBits) {
unsigned short cfgAddr = galinfo[gal].cfgbase;
unsigned short row, bit;
unsigned short addr;
// read fuse rows
for(row = 0; row < galinfo[gal].rows; row++) {
strobeRow(row);
for(bit = 0; bit < galinfo[gal].bits; bit++) {
// check the received bit is 1 and if so then set the fuse map
if (receiveBit()) {
addr = galinfo[gal].rows;
addr *= bit;
addr += row;
setFuseBit(addr);
}
}
if (useDelay) {
delay(useDelay);
}
}
// read UES
strobeRow(galinfo[gal].uesrow);
if (doDiscardBits) {
discardBits(doDiscardBits);
}
for(bit = 0; bit < 64; bit++) {
if (receiveBit()) {
addr = galinfo[gal].uesfuse;
addr += bit;
setFuseBit(addr);
}
}
if (useDelay) {
delay(useDelay);
}
// read CFG
strobeRow(galinfo[gal].cfgrow);
for(bit = 0; bit < galinfo[gal].cfgbits; bit++) {
if (receiveBit()) {
setFuseBit(cfgAddr + cfgArray[bit]);
}
}
}
// generic fuse-map verification, fuse map bits are compared against read bits
static unsigned short verifyGalFuseMap(const unsigned char* cfgArray, char useDelay, char doDiscardBits) {
unsigned short cfgAddr = galinfo[gal].cfgbase;
unsigned short row, bit;
unsigned short addr;
char fuseBit; // fuse bit received from GAL
char mapBit; // fuse bit stored in RAM
unsigned short errors = 0;
// read fuse rows
for(row = 0; row < galinfo[gal].rows; row++) {
strobeRow(row);
for(bit = 0; bit < galinfo[gal].bits; bit++) {
addr = galinfo[gal].rows;
addr *= bit;
addr += row;
mapBit = getFuseBit(addr);
fuseBit = receiveBit();
if (mapBit != fuseBit) {
errors++;
}
}
if (useDelay) {
delay(useDelay);
}
}
// read UES
strobeRow(galinfo[gal].uesrow);
if (doDiscardBits) {
discardBits(doDiscardBits);
}
for(bit = 0; bit < 64; bit++) {
addr = galinfo[gal].uesfuse;
addr += bit;
mapBit = getFuseBit(addr);
fuseBit = receiveBit();
if (mapBit != fuseBit) {
errors++;
}
}
if (useDelay) {
delay(useDelay);
}
// read CFG
strobeRow(galinfo[gal].cfgrow);
for(bit = 0; bit < galinfo[gal].cfgbits; bit++) {
mapBit = getFuseBit(cfgAddr + cfgArray[bit]);
fuseBit = receiveBit();
if (mapBit != fuseBit) {
errors++;
}
}
return errors;
}
// main fuse-map reading and verification function
// READING: reads fuse rows, UES, CFG from GAL and stores into fusemap bit array RAM.
// VERIFY: reads fuse rows, UES, CFG from GAL and compares with fusemap bit array in RAM.
static void readOrVerifyGal(char verify)
{
unsigned short i;
unsigned char* cfgArray = (unsigned char*) cfgV8;
//ensure fusemap is cleared before READ operation, keep it for VERIFY operation.
if (!verify) {
for (i = 0; i < MAXFUSES; i++) {
fusemap[i] = 0;
}
}
turnOn(READGAL);
switch(gal)
{
case GAL16V8:
case GAL20V8:
if (pes[2] == 0x1A || pes[2] == 0x3A) {
cfgArray = (unsigned char*) cfgV8AB;
}
//read without delay, no discard
if (verify) {
i = verifyGalFuseMap(cfgArray, 0, 0);
} else {
readGalFuseMap(cfgArray, 0, 0);
}
break;
case ATF16V8B:
//read without delay, no discard
if (verify) {
i = verifyGalFuseMap(cfgV8, 0, 0);
} else {
readGalFuseMap(cfgV8, 0, 0);
}
break;
case GAL22V10:
case ATF22V10B:
case ATF22V10C:
//read with delay 1 ms, discard 68 cfg bits on ATFxx
if (verify) {
i = verifyGalFuseMap(cfgV10, 1, (gal == GAL22V10) ? 0 : 68);
} else {
readGalFuseMap(cfgV10, 1, (gal == GAL22V10) ? 0 : 68);
}
break;
}
turnOff();
if (verify && i > 0) {
Serial.print(F("ER verify failed. Bit errors: "));
Serial.println(i, DEC);
}
}
// fuse-map writing function for V8 GAL chips
static void writeGalFuseMapV8(const unsigned char* cfgArray) {
unsigned short cfgAddr = galinfo[gal].cfgbase;
unsigned char row, rbit;
unsigned short addr;
setPV(1);
// write fuse rows
for (row = 0; row < galinfo[gal].rows; row++) {
setRow(row);
for(rbit = 0; rbit < galinfo[gal].bits; rbit++) {
addr = galinfo[gal].rows;
addr *= rbit;
addr += row;
sendBit(getFuseBit(addr));
}
strobe(progtime);
}
// write UES
setRow(galinfo[gal].uesrow);
for (rbit = 0; rbit < 64; rbit++) {
addr = galinfo[gal].uesfuse;
addr += rbit;
sendBit(getFuseBit(addr));
}
strobe(progtime);
// write CFG
setRow(galinfo[gal].cfgrow);
for(rbit = 0; rbit < galinfo[gal].cfgbits; rbit++) {
sendBit(getFuseBit(cfgAddr + cfgArray[rbit]));
}
strobe(progtime);
setPV(0);
}
// fuse-map writing function for V10 GAL chips
static void writeGalFuseMapV10(const unsigned char* cfgArray, char fillUesStart, char useSdin) {
unsigned short cfgAddr = galinfo[gal].cfgbase;
unsigned char row, bit;
unsigned short addr;
setRow(0); //RA0-5 low
// write fuse rows
for (row = 0; row < galinfo[gal].rows; row++) {
for (bit = 0; bit < galinfo[gal].bits; bit++) {
addr = galinfo[gal].rows;
addr *= bit;
addr += row;
sendBit(getFuseBit(addr));
}
sendAddress(6, row);
setPV(1);
strobe(progtime);
setPV(0);
}
// write UES
if (fillUesStart) {
sendBits(68, 1);
}
for (bit = 0; bit < 64; bit++) {
addr = galinfo[gal].uesfuse;
addr += bit;
sendBit(getFuseBit(addr));
}
if (!fillUesStart) {
sendBits(68, 1);
}
sendAddress(6, galinfo[gal].uesrow);
setPV(1);
strobe(progtime);
setPV(0);
// write CFG
setRow(galinfo[gal].cfgrow);
for(bit = 0; bit < galinfo[gal].cfgbits - useSdin; bit++) {
sendBit(getFuseBit(cfgAddr + cfgArray[bit]));
}
if (useSdin) {
setSDIN(getFuseBit(cfgAddr + cfgArray[19]));
}
setPV(1);
strobe(progtime);
setPV(0);
if (useSdin) {
// disable power-down feature (JEDEC bit #5892)
setRow(0);
sendAddress(6, 59);
setPV(1);
strobe(progtime);
setPV(0);
}
}
// main fuse-map writing function
static void writeGal()
{
unsigned short i;
unsigned char* cfgArray = (unsigned char*) cfgV8;
turnOn(WRITEGAL);
switch(gal)
{
case GAL16V8:
case GAL20V8:
if (pes[2] == 0x1A || pes[2] == 0x3A) {
cfgArray = (unsigned char*) cfgV8AB;
}
writeGalFuseMapV8(cfgArray);
break;
case ATF16V8B:
writeGalFuseMapV8(cfgV8);
break;
case GAL22V10:
case ATF22V10B:
case ATF22V10C:
writeGalFuseMapV10(cfgV10, (gal == GAL22V10) ? 0 : 1, (gal == ATF22V10C) ? 1 : 0);
break;
}
turnOff();
}
// erases fuse-map in the GAL
static void eraseGAL(void)
{
turnOn(ERASEGAL);
setPV(1);
setRow(galinfo[gal].eraserow);
if (gal == GAL16V8 || gal == ATF16V8B || gal==GAL20V8) {
sendBit(1);
}
strobe(erasetime);
setPV(0);
turnOff();
}
static char checkGalTypeViaPes(void)
{
char type = UNKNOWN;
if (pes[7] == 'F' && pes[6]== '2' && pes[5]== '2' && pes[4]== 'V' && pes[3]== '1' && pes[2]=='0') {
if (pes[1] == 'B') {
type = ATF22V10B;
} else {
type = ATF22V10C;
}
}
else if (pes[6] == 'F' && pes[5] == '1' && pes[4]== '6' && pes[3] == 'V' && pes[2]=='8') {
type = ATF16V8B;
}
else if (pes[2] != 0x00 && pes[2] != 0xFF) {
for (type = (sizeof(galinfo) / sizeof(galinfo[0])) - 1; type; type--) {
if (pes[2] == galinfo[type].id0 || pes[2] == galinfo[type].id1) break;
}
}
return type;
}
// checks whether gal type corresponds to PES information on the IC
// note: PES must be read beforehand
static char testProperGAL(void)
{
char type = checkGalTypeViaPes();
if (type == 0) {
//Unknown or illegal PES,
goto error;
}
else if (type != gal) {
//PES indicates a different GAL type than selected. Change to detected GAL type?
// gal = type;
goto error;
}
return 1;
error:
Serial.println(F("ER unknown or wrong GAL type (check Power ON)"));
return 0;
}
// prints a hexadecimal number - 2 digits with a leading zero
static void printFormatedNumberHex2(unsigned char num) {
if (num < 16) {
Serial.print(F("0"));
}
Serial.print(num, HEX);
}
// prints a hexadecimal number - 4 digits with a leading zero
static void printFormatedNumberHex4(unsigned short num) {
if (num < 0x10) {
Serial.print(F("000"));
} else
if (num < 0x100) {
Serial.print(F("00"));
} else
if (num < 0x1000) {
Serial.print(F("0"));
}
Serial.print(num, HEX);
}
// prints a decimal number - 4 digits with a leading zero
static void printFormatedNumberDec4(unsigned short num) {
if (num < 1) {
Serial.print(F("0000"));
return;
}
if (num < 10) {
Serial.print(F("000"));
} else
if (num < 100) {
Serial.print(F("00"));
} else
if (num < 1000) {
Serial.print(F("0"));
}
Serial.print(num, DEC);
}
// adds a formated decimal number with a leading zero to a line buffer at position 'i'
static unsigned char addFormatedNumberDec4(unsigned short num, unsigned char i) {
char cnt = 3;
while (cnt >= 0) {
line[i + cnt] = '0' + (num % 10);
num /= 10;
cnt--;
}
return i + 4;
}
// calculates fuse-map checksum and returns it
static unsigned short checkSum(unsigned short n)
{
unsigned short c, e, i;
unsigned long a;
c = e= 0;
a = 0;
for (i = 0; i < n; i++) {
e++;
if (e == 9) {
e = 1;
a += c;
c = 0;
}
c >>= 1;
if (getFuseBit(i)) {
c += 0x80;
}
}
return (unsigned short)((c >> (8 - e)) + a);
}
// prints the contents of fuse-map array in the form of JEDEC text file
static void printJedec()
{
unsigned short i, j, k, n;
unsigned char unused, start;
Serial.print(F("JEDEC file for "));
Serial.println(galinfo[gal].name);
Serial.print(F("*QP")); Serial.print(galinfo[gal].pins, DEC);
Serial.print(F("*QF")); Serial.print(galinfo[gal].fuses, DEC);
Serial.println(F("*QV0*F0*G0*X0*"));
for( i = k = 0; i < galinfo[gal].bits; i++) {
unused = 1;
n = 0;
line[n++] = 'L';
n = addFormatedNumberDec4(k, n);
line[n++] = ' ';
for(j= 0; j < galinfo[gal].rows; j++, k++) {
if (getFuseBit(k)) {
unused = 0;
line[n++] = '1';
} else {
line[n++] = '0';
}
}
line[n++] = '*';
line[n++] = 0;
if (!unused) {
Serial.println(line);
}
}
if( k < galinfo[gal].uesfuse) {
unused = 1;
n = 0;
line[n++] = 'L';
n = addFormatedNumberDec4(k, n);
line[n++] = ' ';
while(k < galinfo[gal].uesfuse) {
if (getFuseBit(k)) {
unused = 0;
line[n++] = '1';
} else {
line[n++] = '0';
}
k++;
}
line[n++] = '*';
line[n++] = 0;
if (!unused) {
Serial.println(line);
}
}
line[0] = 0;
Serial.print(F("N UES"));
for (j = 0;j < galinfo[gal].uesbytes; j++) {
n = 0;
for (i = 0; i < 8; i++) {
if (getFuseBit(k + 8 * j + i)) {
if (gal == ATF22V10C) {
n |= 1 << (7 - i); // big-endian
}
else {
n |= 1 << i; // little-endian
}
}
}
Serial.print(F(" "));
printFormatedNumberHex2(n);
}
Serial.println(F("*"));
Serial.print(F("L"));
printFormatedNumberDec4(k);
Serial.print(F(" "));
for(j = 0; j < 8 * galinfo[gal].uesbytes; j++) {
if (getFuseBit(k++)) {
Serial.print(F("1"));
} else {
Serial.print(F("0"));
}
}
Serial.println(F("*"));
if (k < galinfo[gal].fuses) {
Serial.print(F("L"));
printFormatedNumberDec4(k);
Serial.print(F(" "));
while( k < galinfo[gal].fuses) {
if (getFuseBit(k++)) {
Serial.print(F("1"));
} else {
Serial.print(F("0"));
}
}
Serial.println(F("*"));
}
Serial.print(F("N PES"));
for(i = 0; i < galinfo[gal].pesbytes; i++) {
Serial.print(F(" "));
printFormatedNumberHex2(pes[i]);
}
Serial.println(F("*"));
Serial.print(F("C"));
printFormatedNumberHex4(checkSum(galinfo[gal].fuses));
Serial.println();
Serial.println(F("*"));
}
// helper print function to save RAM space
static void printNoFusesError() {
Serial.println(F("ER fuse map not uploaded"));
}
static void testVoltage(int seconds) {
int i;
setVPP(1);
for (i = 0 ; i < seconds; i++) {
delay(1000);
}
setVPP(0);
}
// Arduino main loop - where the magic happens :-)
void loop() {
// read a command from serial terminal or COMMAND_NONE if nothing is received from serial
char command = handleTerminalCommands();
// any unexpected input when uploading fuse map terminates the upload process
if (isUploading && command != COMMAND_UTX && command != COMMAND_NONE) {
Serial.println(F("ER upload aborted"));
isUploading = 0;
lineIndex = 0;
}
// handle commands received from the serial terminal
switch (command) {
// print some help
case COMMAND_HELP: {
printHelp(1);
} break;
case COMMAND_IDENTIFY_PROGRAMMER : {
printHelp(0);
} break;
// verify fuse-map bits and bits read from the GAL chip
case COMMAND_VERIFY_FUSES: {
if (mapUploaded) {
readPes();
parsePes(UNKNOWN);
readOrVerifyGal(1); //just verify, do not overwrite fusemap
} else {
printNoFusesError();
}
} break;
// handle upload command - start the download of fuse-map
case COMMAND_UPLOAD: {
short i;
// clean fuses
for (i = 0; i < MAXFUSES; i++) {
fusemap[i] = 0;
}
isUploading = 1;
} break;
// command of the upload protocol
case COMMAND_UTX : {
parseUploadLine();
} break;
// read and print the PES
case COMMAND_READ_PES : {
char type;
readPes();
type = checkGalTypeViaPes();
parsePes(type);
printPes(type);
} break;
// read fuse-map from the GAL and print it in the JEDEC form
case COMMAND_READ_FUSES : {
readPes();
parsePes(UNKNOWN);
if (testProperGAL()) {
readOrVerifyGal(0); //just read, no verification
printJedec();
}
} break;
// write current fuse-map to the GAL chip
case COMMAND_WRITE_FUSES : {
if (mapUploaded) {
readPes();
parsePes(UNKNOWN);
if (testProperGAL()) {
writeGal();
//TODO security
}
} else {
printNoFusesError();
}
} break;
// erases the fuse-map on the GAL chip
case COMMAND_ERASE_GAL: {
readPes();
parsePes(UNKNOWN);
if (testProperGAL()) {
eraseGAL();
}
} break;
// toggles terminal echo
case COMMAND_ECHO : {
echoEnabled = 1 - echoEnabled;
} break;
case COMMAND_TEST_VOLTAGE : {
testVoltage(20);
}break;
default: {
if (command != COMMAND_NONE) {
Serial.print(F("ER Unknown command: "));
Serial.println(line);
}
}
}
// display prompt character - important for the PC program to check that Arduino
// finished the desired operation
if (command != COMMAND_NONE) {
Serial.println(F(">"));
}
// and that's it!
}