aiie/apple/nibutil.cpp

332 lines
9.8 KiB
C++
Raw Normal View History

#include "nibutil.h"
#ifdef TEENSYDUINO
#include <Arduino.h>
#else
#include <unistd.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#endif
// Long gaps are more "correct" in the sense that they're
// nib-disk-like; but they mean the VM has to chew on a lot of disk
// gaps to find the real data, which takes a noticeable amount of
// time. With this off, we present a minimum number of gaps (that
// hopefully aren't too short for the ROM to be able to write
// correctly)
//#define LONGGAPS
#define DISK_VOLUME 254
// dos 3.3 to physical sector conversion
const static uint8_t dephys[16] = {
0x00, 0x07, 0x0e, 0x06, 0x0d, 0x05, 0x0c, 0x04,
0x0b, 0x03, 0x0a, 0x02, 0x09, 0x01, 0x08, 0x0f };
// Prodos to physical sector conversion
const uint8_t deProdosPhys[] = {
0x00, 0x08, 0x01, 0x09, 0x02, 0x0a, 0x03, 0x0b,
0x04, 0x0c, 0x05, 0x0d, 0x06, 0x0e, 0x07, 0x0f };
const static uint8_t _trans[64] = {0x96, 0x97, 0x9a, 0x9b, 0x9d, 0x9e, 0x9f, 0xa6,
0xa7, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb2, 0xb3,
0xb4, 0xb5, 0xb6, 0xb7, 0xb9, 0xba, 0xbb, 0xbc,
0xbd, 0xbe, 0xbf, 0xcb, 0xcd, 0xce, 0xcf, 0xd3,
0xd6, 0xd7, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde,
0xdf, 0xe5, 0xe6, 0xe7, 0xe9, 0xea, 0xeb, 0xec,
0xed, 0xee, 0xef, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6,
0xf7, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff};
const static uint8_t _detrans[0x80] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,
0x00, 0x00, 0x08, 0x0C, 0x00, 0x10, 0x14, 0x18,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x20,
0x00, 0x00, 0x00, 0x24, 0x28, 0x2C, 0x30, 0x34,
0x00, 0x00, 0x38, 0x3C, 0x40, 0x44, 0x48, 0x4C,
0x00, 0x50, 0x54, 0x58, 0x5C, 0x60, 0x64, 0x68,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x6C, 0x00, 0x70, 0x74, 0x78,
0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x80, 0x84,
0x00, 0x88, 0x8C, 0x90, 0x94, 0x98, 0x9C, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0xA4, 0xA8, 0xAC,
0x00, 0xB0, 0xB4, 0xB8, 0xBC, 0xC0, 0xC4, 0xC8,
0x00, 0x00, 0xCC, 0xD0, 0xD4, 0xD8, 0xDC, 0xE0,
0x00, 0xE4, 0xE8, 0xEC, 0xF0, 0xF4, 0xF8, 0xFC };
void nibblizeTrack(RingBuffer *trackBuffer, uint8_t *rawTrackBuffer,
uint8_t diskType, int8_t track)
{
int checksum;
for (uint8_t sector=0; sector<16; sector++) {
for (uint8_t i=0;
#ifdef LONGGAPS
i < (sector==0 ? 0x63 : 0x13);
#else
i < 8;
#endif
i++) {
trackBuffer->addByte(GAP);
}
trackBuffer->addByte(0xD5); // prolog
trackBuffer->addByte(0xAA);
trackBuffer->addByte(0x96);
trackBuffer->addByte(nib1(DISK_VOLUME));
trackBuffer->addByte(nib2(DISK_VOLUME));
trackBuffer->addByte(nib1(track));
trackBuffer->addByte(nib2(track));
trackBuffer->addByte(nib1(sector));
trackBuffer->addByte(nib2(sector));
checksum = DISK_VOLUME ^ track ^ sector;
trackBuffer->addByte(nib1(checksum));
trackBuffer->addByte(nib2(checksum));
trackBuffer->addByte(0xDE); // epilog
trackBuffer->addByte(0xAA);
trackBuffer->addByte(0xEB); // Not strictly necessary, but the DiskII controller does it, so we will too.
// The DiskII controller puts out 5 GAP bytes here.
for (uint8_t i=0; i<5; i++) {
trackBuffer->addByte(GAP);
}
trackBuffer->addByte(0xD5); // data prolog
trackBuffer->addByte(0xAA);
trackBuffer->addByte(0xAD);
uint8_t physicalSector = (diskType == prodosDisk ? deProdosPhys[sector] : dephys[sector]);
encodeData(trackBuffer, &rawTrackBuffer[physicalSector * 256]);
trackBuffer->addByte(0xDE); // data epilog
trackBuffer->addByte(0xAA);
trackBuffer->addByte(0xEB);
// trackBuffer->addByte(GAP);
}
}
#define SIXBIT_SPAN 0x56 // 86 bytes
// Pop the next 343 bytes off of trackBuffer, which should be 342
// 6:2-bit GCR encoded values, which we decode back in to 256 8-byte
// output values; and one checksum byte.
//
// Return true if we've successfully consumed 343 bytes from
// trackBuf. This reads from the circular buffer trackBuffer, so if
// there's not enough data there, the results are somewhat
// unpredictable.
bool decodeData(RingBuffer *trackBuffer, uint16_t startAt, uint8_t *output)
{
// Basic check that there's enough buffer data in trackBuffer. Note
// that we're not checking it against startAt; we could be wrapping
// around.
if (trackBuffer->count() < 343)
return false;
static uint8_t workbuf[342];
for (int i=0; i<342; i++) {
uint8_t in = trackBuffer->peek(startAt++) & 0x7F; // strip high bit
workbuf[i] = _detrans[in];
}
// fixme: collapse this in to the previous loop
uint8_t prev = 0;
for (int i=0; i<342; i++) {
workbuf[i] = prev ^ workbuf[i];
prev = workbuf[i];
}
// Put the checksum on the track - only necessary if we're about to
// write the nibblized version of the track back out
/* uint16_t cursor = trackBuffer->Cursor();
trackBuffer->setPeekCursor(startAt++);
trackBuffer->replaceByte(prev); // 'prev' holds the checksum
trackBuffer->setPeekCursor(cursor); // put it back where we found it
*/
// Start with all of the bytes with 6 bits of data
for (uint16_t i=0; i<256; i++) {
output[i] = workbuf[SIXBIT_SPAN + i] & 0xFC; // 6 bits
}
// Then pull in all of the 2-bit values, which are stuffed 3 to a byte. That gives us
// 4 bits more than we need - the last two skip two of the bits.
for (uint8_t i=0; i<SIXBIT_SPAN; i++) {
// This byte (workbuf[i]) has 2 bits for each of 3 output bytes:
// i, SIXBIT_SPAN+i, and 2*SIXBIT_SPAN+i
uint8_t thisbyte = workbuf[i];
output[ i] |= ((thisbyte & 0x08) >> 3) | ((thisbyte & 0x04) >> 1);
output[ SIXBIT_SPAN + i] |= ((thisbyte & 0x20) >> 5) | ((thisbyte & 0x10) >> 3);
if (i < SIXBIT_SPAN-2) {
output[2*SIXBIT_SPAN + i] |= ((thisbyte & 0x80) >> 7) | ((thisbyte & 0x40) >> 5);
}
}
// FIXME: check or update the checksum?
return true;
}
void encodeData(RingBuffer *trackBuffer, uint8_t *data)
{
int16_t i;
int ptr2 = 0;
int ptr6 = 0x56;
static int nibbles[0x156];
for (i=0; i<0x156; i++) {
nibbles[i] = 0;
}
int idx2 = 0x55;
for (int idx6 = 0x101; idx6 >= 0; idx6--) {
int val6 = data[idx6 & 0xFF];
int val2 = nibbles[ptr2 + idx2];
val2 = (val2 << 1) | (val6 & 1);
val6 >>= 1;
val2 = (val2 << 1) | (val6 & 1);
val6 >>= 1;
// There are 2 "extra" bytes of 2-bit data that we ignore here.
if (ptr6 + idx6 < 0x156) {
nibbles[ptr6 + idx6] = val6;
}
if (ptr2 + idx2 < 0x156) {
nibbles[ptr2 + idx2] = val2;
}
if (--idx2 < 0) {
idx2 = 0x55;
}
}
int lastv = 0;
for (int idx = 0; idx < 0x156; idx++) {
int val = nibbles[idx];
trackBuffer->addByte(_trans[lastv ^ val]);
lastv = val;
}
trackBuffer->addByte(_trans[lastv]);
}
nibErr denibblizeTrack(RingBuffer *trackBuffer, uint8_t *rawTrackBuffer,
uint8_t diskType, int8_t track)
{
// We can't tell exactly what the length should be, b/c there might
// be varying numbers of GAP bytes. But we can tell, generally, that
// this is the minimum acceptable length that might hold all the
// track data.
if (trackBuffer->count() < 16*MINNIBSECTORSIZE) {
return errorShortTrack;
}
// bitmask of the sectors that we've found while decoding. We should
// find all 16.
uint16_t sectorsUpdated = 0;
// loop through the data twice, so we make sure we read anything
// that crosses the end/start boundary
// FIXME: if this approach works, we probably want 1/16th extra, not 2*
for (uint16_t i=0; i<2*trackBuffer->count(); ) {
// Find the prolog
while (trackBuffer->peek(i++) != 0xD5)
;
if (trackBuffer->peek(i++) != 0xAA) {
continue;
}
if (trackBuffer->peek(i++) != 0x96) {
continue;
}
// And now we should be in the header section
uint8_t volumeID = denib(trackBuffer->peek(i),
trackBuffer->peek(i+1));
i += 2;
uint8_t trackID = denib(trackBuffer->peek(i),
trackBuffer->peek(i+1));
i += 2;
uint8_t sectorNum = denib(trackBuffer->peek(i),
trackBuffer->peek(i+1));
i += 2;
uint8_t headerChecksum = denib(trackBuffer->peek(i),
trackBuffer->peek(i+1));
i += 2;
if (headerChecksum != (volumeID ^ trackID ^ sectorNum)) {
continue;
}
// check for the epilog
if (trackBuffer->peek(i++) != 0xDE) {
continue;
}
if (trackBuffer->peek(i++) != 0xAA) {
continue;
}
// Skip to the data prolog
while (trackBuffer->peek(i++) != 0xD5)
;
if (trackBuffer->peek(i++) != 0xAA) {
continue;
}
if (trackBuffer->peek(i++) != 0xAD) {
continue;
}
// Decode the data in to a temporary buffer: we don't want to overwrite
// something valid with partial data
uint8_t output[256];
if (!decodeData(trackBuffer, i, output)) {
continue;
}
i += 343;
// Check the data epilog
if (trackBuffer->peek(i++) != 0xDE) {
continue;
}
if (trackBuffer->peek(i++) != 0xAA) {
continue;
}
if (trackBuffer->peek(i++) != 0xEB) {
continue;
}
// We've got a whole block! Put it in the rawTrackBuffer and mark
// the bit for it in sectorsUpdated.
// FIXME: if trackID != curTrack, that's an error?
uint8_t targetSector;
if (diskType == prodosDisk) {
targetSector = deProdosPhys[sectorNum];
} else {
targetSector = dephys[sectorNum];
}
memcpy(&rawTrackBuffer[targetSector * 256],
output,
256);
sectorsUpdated |= (1 << sectorNum);
}
// Check that we found all of the sectors for this track
if (sectorsUpdated != 0xFFFF) {
return errorMissingSectors;
}
return errorNone;
}