aiie/tests/65c02-n.lst

364 lines
18 KiB
Plaintext
Raw Normal View History

2018-06-16 03:13:06 +00:00
AS65 Assembler for R6502 [1.42]. Copyright 1994-2007, Frank A. Kingswood Page 1
----------------------------------------------------- 6502_decimal_test.a65 ------------------------------------------------------
355 lines read, no errors in pass 1.
; Verify decimal mode behavior
; Written by Bruce Clark. This code is public domain.
; see http://www.6502.org/tutorials/decimal_mode.html
;
; Returns:
; ERROR = 0 if the test passed
; ERROR = 1 if the test failed
; modify the code at the DONE label for desired program end
;
; This routine requires 17 bytes of RAM -- 1 byte each for:
; AR, CF, DA, DNVZC, ERROR, HA, HNVZC, N1, N1H, N1L, N2, N2L, NF, VF, and ZF
; and 2 bytes for N2H
;
; Variables:
; N1 and N2 are the two numbers to be added or subtracted
; N1H, N1L, N2H, and N2L are the upper 4 bits and lower 4 bits of N1 and N2
; DA and DNVZC are the actual accumulator and flag results in decimal mode
; HA and HNVZC are the accumulator and flag results when N1 and N2 are
; added or subtracted using binary arithmetic
; AR, NF, VF, ZF, and CF are the predicted decimal mode accumulator and
; flag results, calculated using binary arithmetic
;
; This program takes approximately 1 minute at 1 MHz (a few seconds more on
; a 65C02 than a 6502 or 65816)
;
; Configuration:
0001 = cputype = 1 ; 0 = 6502, 1 = 65C02, 2 = 65C816
0000 = vld_bcd = 0 ; 0 = allow invalid bcd, 1 = valid bcd only
0000 = chk_a = 0 ; check accumulator
0001 = chk_n = 1 ; check sign (negative) flag
0000 = chk_v = 0 ; check overflow flag
0000 = chk_z = 0 ; check zero flag
0000 = chk_c = 0 ; check carry flag
end_of_test macro
db $db ;execute 65C02 stop instruction
endm
bss
0000 = org 0
; operands - register Y = carry in
0000 = N1 ds 1
0001 = N2 ds 1
; binary result
0002 = HA ds 1
0003 = HNVZC ds 1
;04
; decimal result
0004 = DA ds 1
0005 = DNVZC ds 1
; predicted results
0006 = AR ds 1
0007 = NF ds 1
;08
0008 = VF ds 1
0009 = ZF ds 1
000a = CF ds 1
000b = ERROR ds 1
;0C
; workspace
000c = N1L ds 1
000d = N1H ds 1
000e = N2L ds 1
000f = N2H ds 2
code
0200 = org $200
0200 : a001 TEST ldy #1 ; initialize Y (used to loop through carry flag values)
0202 : 840b sty ERROR ; store 1 in ERROR until the test passes
0204 : a900 lda #0 ; initialize N1 and N2
0206 : 8500 sta N1
0208 : 8501 sta N2
020a : a501 LOOP1 lda N2 ; N2L = N2 & $0F
020c : 290f and #$0F ; [1] see text
if vld_bcd = 1
cmp #$0a
bcs NEXT2
endif
020e : 850e sta N2L
0210 : a501 lda N2 ; N2H = N2 & $F0
0212 : 29f0 and #$F0 ; [2] see text
if vld_bcd = 1
cmp #$a0
bcs NEXT2
endif
0214 : 850f sta N2H
0216 : 090f ora #$0F ; N2H+1 = (N2 & $F0) + $0F
0218 : 8510 sta N2H+1
021a : a500 LOOP2 lda N1 ; N1L = N1 & $0F
021c : 290f and #$0F ; [3] see text
if vld_bcd = 1
cmp #$0a
bcs NEXT1
endif
021e : 850c sta N1L
0220 : a500 lda N1 ; N1H = N1 & $F0
0222 : 29f0 and #$F0 ; [4] see text
if vld_bcd = 1
cmp #$a0
bcs NEXT1
endif
0224 : 850d sta N1H
0226 : 204c02 jsr ADD
0229 : 20d302 jsr A6502
022c : 20ca02 jsr COMPARE
022f : d01a bne DONE
0231 : 209002 jsr SUB
0234 : 20dc02 jsr S6502
0237 : 20ca02 jsr COMPARE
023a : d00f bne DONE
023c : e600 NEXT1 inc N1 ; [5] see text
023e : d0da bne LOOP2 ; loop through all 256 values of N1
0240 : e601 NEXT2 inc N2 ; [6] see text
0242 : d0c6 bne LOOP1 ; loop through all 256 values of N2
0244 : 88 dey
0245 : 10c3 bpl LOOP1 ; loop through both values of the carry flag
0247 : a900 lda #0 ; test passed, so store 0 in ERROR
0249 : 850b sta ERROR
024b : DONE
end_of_test
024b : db > db $db ;execute 65C02 stop instruction
; Calculate the actual decimal mode accumulator and flags, the accumulator
; and flag results when N1 is added to N2 using binary arithmetic, the
; predicted accumulator result, the predicted carry flag, and the predicted
; V flag
;
024c : f8 ADD sed ; decimal mode
024d : c001 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
024f : a500 lda N1
0251 : 6501 adc N2
0253 : 8504 sta DA ; actual accumulator result in decimal mode
0255 : 08 php
0256 : 68 pla
0257 : 8505 sta DNVZC ; actual flags result in decimal mode
0259 : d8 cld ; binary mode
025a : c001 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
025c : a500 lda N1
025e : 6501 adc N2
0260 : 8502 sta HA ; accumulator result of N1+N2 using binary arithmetic
0262 : 08 php
0263 : 68 pla
0264 : 8503 sta HNVZC ; flags result of N1+N2 using binary arithmetic
0266 : c001 cpy #1
0268 : a50c lda N1L
026a : 650e adc N2L
026c : c90a cmp #$0A
026e : a200 ldx #0
0270 : 9006 bcc A1
0272 : e8 inx
0273 : 6905 adc #5 ; add 6 (carry is set)
0275 : 290f and #$0F
0277 : 38 sec
0278 : 050d A1 ora N1H
;
; if N1L + N2L < $0A, then add N2 & $F0
; if N1L + N2L >= $0A, then add (N2 & $F0) + $0F + 1 (carry is set)
;
027a : 750f adc N2H,x
027c : 08 php
027d : b004 bcs A2
027f : c9a0 cmp #$A0
0281 : 9003 bcc A3
0283 : 695f A2 adc #$5F ; add $60 (carry is set)
0285 : 38 sec
0286 : 8506 A3 sta AR ; predicted accumulator result
0288 : 08 php
0289 : 68 pla
028a : 850a sta CF ; predicted carry result
028c : 68 pla
;
; note that all 8 bits of the P register are stored in VF
;
028d : 8508 sta VF ; predicted V flags
028f : 60 rts
; Calculate the actual decimal mode accumulator and flags, and the
; accumulator and flag results when N2 is subtracted from N1 using binary
; arithmetic
;
0290 : f8 SUB sed ; decimal mode
0291 : c001 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
0293 : a500 lda N1
0295 : e501 sbc N2
0297 : 8504 sta DA ; actual accumulator result in decimal mode
0299 : 08 php
029a : 68 pla
029b : 8505 sta DNVZC ; actual flags result in decimal mode
029d : d8 cld ; binary mode
029e : c001 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
02a0 : a500 lda N1
02a2 : e501 sbc N2
02a4 : 8502 sta HA ; accumulator result of N1-N2 using binary arithmetic
02a6 : 08 php
02a7 : 68 pla
02a8 : 8503 sta HNVZC ; flags result of N1-N2 using binary arithmetic
02aa : 60 rts
if cputype != 1
; Calculate the predicted SBC accumulator result for the 6502 and 65816
;
SUB1 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
lda N1L
sbc N2L
ldx #0
bcs S11
inx
sbc #5 ; subtract 6 (carry is clear)
and #$0F
clc
S11 ora N1H
;
; if N1L - N2L >= 0, then subtract N2 & $F0
; if N1L - N2L < 0, then subtract (N2 & $F0) + $0F + 1 (carry is clear)
;
sbc N2H,x
bcs S12
sbc #$5F ; subtract $60 (carry is clear)
S12 sta AR
rts
endif
if cputype = 1
; Calculate the predicted SBC accumulator result for the 6502 and 65C02
;
02ab : c001 SUB2 cpy #1 ; set carry if Y = 1, clear carry if Y = 0
02ad : a50c lda N1L
02af : e50e sbc N2L
02b1 : a200 ldx #0
02b3 : b004 bcs S21
02b5 : e8 inx
02b6 : 290f and #$0F
02b8 : 18 clc
02b9 : 050d S21 ora N1H
;
; if N1L - N2L >= 0, then subtract N2 & $F0
; if N1L - N2L < 0, then subtract (N2 & $F0) + $0F + 1 (carry is clear)
;
02bb : f50f sbc N2H,x
02bd : b002 bcs S22
02bf : e95f sbc #$5F ; subtract $60 (carry is clear)
02c1 : e000 S22 cpx #0
02c3 : f002 beq S23
02c5 : e906 sbc #6
02c7 : 8506 S23 sta AR ; predicted accumulator result
02c9 : 60 rts
endif
; Compare accumulator actual results to predicted results
;
; Return:
; Z flag = 1 (BEQ branch) if same
; Z flag = 0 (BNE branch) if different
;
02ca : COMPARE
if chk_a = 1
lda DA
cmp AR
bne C1
endif
if chk_n = 1
02ca : a505 lda DNVZC ; [7] see text
02cc : 4507 eor NF
02ce : 2980 and #$80 ; mask off N flag
02d0 : d000 bne C1
endif
if chk_v = 1
lda DNVZC ; [8] see text
eor VF
and #$40 ; mask off V flag
bne C1 ; [9] see text
endif
if chk_z = 1
lda DNVZC
eor ZF ; mask off Z flag
and #2
bne C1 ; [10] see text
endif
if chk_c = 1
lda DNVZC
eor CF
and #1 ; mask off C flag
endif
02d2 : 60 C1 rts
; These routines store the predicted values for ADC and SBC for the 6502,
; 65C02, and 65816 in AR, CF, NF, VF, and ZF
if cputype = 0
A6502 lda VF ; 6502
;
; since all 8 bits of the P register were stored in VF, bit 7 of VF contains
; the N flag for NF
;
sta NF
lda HNVZC
sta ZF
rts
S6502 jsr SUB1
lda HNVZC
sta NF
sta VF
sta ZF
sta CF
rts
endif
if cputype = 1
02d3 : a506 A6502 lda AR ; 65C02
02d5 : 08 php
02d6 : 68 pla
02d7 : 8507 sta NF
02d9 : 8509 sta ZF
02db : 60 rts
02dc : 20ab02 S6502 jsr SUB2
02df : a506 lda AR
02e1 : 08 php
02e2 : 68 pla
02e3 : 8507 sta NF
02e5 : 8509 sta ZF
02e7 : a503 lda HNVZC
02e9 : 8508 sta VF
02eb : 850a sta CF
02ed : 60 rts
endif
if cputype = 2
A6502 lda AR ; 65C816
php
pla
sta NF
sta ZF
rts
S6502 jsr SUB1
lda AR
php
pla
sta NF
sta ZF
lda HNVZC
sta VF
sta CF
rts
endif
02dc = end TEST
No errors in pass 2.