<h3>SparkFun Switches, Buttons, Encoders</h3> In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000) >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="http://spec_sheets.e-switch.com/specs/P010338.pdf">Dimensional Drawing</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - PTH, 12mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-5050) >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="https://www.sparkfun.com/datasheets/Components/1101.pdf">Datasheet</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="http://www.apem.com/files/apem/brochures/ADTS6-ADTSM-KTSC6.pdf">Datasheet</a> (ADTSM63NVTR) >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 12mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="https://cdn.sparkfun.com/datasheets/Components/Switches/N301102.pdf">Datasheet</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. <a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000) >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, Right-angle</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). >Name >Value <h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a> >Name >Value <h3>SPDT PTH Slide Switch</h3> Single-pole, double-throw (SPDT) switch. <a href="https://www.sparkfun.com/datasheets/Components/Buttons/P040040c.pdf">Dimensional Drawing</a> >Name >Value <h3>ITT Industries AYZ0202 DPDT Switch - SMD</h3> Double-pole, double-throw switches. <a href="https://www.sparkfun.com/datasheets/Components/SW_slide_ayz.pdf">Datasheet</a> >Name >Value <h3>SPDT PTH Slide Switch - Locking Footprint</h3> Single-pole, double-throw (SPDT) switch. Warning: This is the LOCK version of this package. This package has offset PTH pins, which help to hold the part in place while soldering. <a href="https://www.sparkfun.com/datasheets/Components/Buttons/P040040c.pdf">Dimensional Drawing</a> >Name >Value <h3>SPDT PTH Slide Switch - KIT Footprint</h3> Single-pole, double-throw (SPDT) switch. Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. <a href="https://www.sparkfun.com/datasheets/Components/Buttons/P040040c.pdf">Dimensional Drawing</a> >Name >Value <h3>SPDT Slide Switch - SMD</h3> Single-pole, double-throw (SPDT) switch. <a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SLIDE.pdf">Datasheet</a> >Name >Value <h3>Momentary Switch (Pushbutton) - SPST</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). >NAME >VALUE <h3>Single Pole, Double Throw (SPDT) Switch</h3> Single-pole, double-throw (SPDT) switch. >NAME >VALUE <h3>Momentary Switch (Pushbutton) - SPST</h3> Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4> <h5>PTH-12MM - 12mm square, through-hole</h5> <ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul> <h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5> <ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li> <li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul> <h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5> <ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734"> SparkFun BigTime Watch Kit</a></li></ul> <h5>SMD-12MM - 12mm square, surface-mount</h5> <ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li> <li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul> <h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5> <ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul> <h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5> <ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul> <h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5> <ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li> <li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li> <li>REDUNDANT package connects both switch circuits together</li></ul> <h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5> <ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul> <h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5> <ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li> <li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul> <h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5> <ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a></li></ul> <h3>Single Pole, Double Throw (SPDT) Switch</h3> Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4> <h5>SMD-AYZ0202</h5> <ul> <li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li> <li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a> </ul> <h5>PTH-11.6X4.0MM</h5> <ul> <li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li> <li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li> </ul> <h5>PTH-11.6X4.0MM-KIT</h5> <ul> <li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li> </ul> <h5>PTH-11.6X4.0MM-LOCK</h5> <ul> <li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li> </ul> <h5>SMD-RIGHT-ANGLE</h5> <ul> <li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li> <li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li> </ul> >NAME >VALUE >NAME >VALUE >VALUE >NAME Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL <h3>Plated Through Hole - 2x20 Shrouded Header</h3> Specifications: <ul><li>Pin count:40</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://cdn.sparkfun.com/datasheets/Dev/RaspberryPi/B-D-xx1X.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_20x2</li> </ul> >NAME >VALUE <h3>Surface Mount - 2x20 Shrouded Header</h3> Specifications: <ul><li>Pin count:40</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://sullinscorp.com/catalogs/145_PAGE118_.100_SBH11_SERIES_MALE_BOX_HDR_ST_RA_SMT.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_20x2</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 2x20</h3> Specifications: <ul><li>Pin count:40</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_20x2</li> </ul> >NAME >VALUE SainSmart 3.2" LCD - cf. http://sainsmart.com/skin/frontend/base/default/document/3_2%20inch%20TFT%20with%20SD%20and%20Touch%20Quickstart.pdf <h3>SparkFun Power Symbols</h3> This library contains power, ground, and voltage-supply symbols. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>VCC Voltage Supply</h3> >VALUE <h3>VCC Voltage Supply</h3> Positive voltage supply (traditionally for a BJT device, C=collector). <h3>SparkFun Electromechanical Parts</h3> This library contains electromechanical devices, like motors, speakers,servos, and relays. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Speaker - PCB Mount</h3> PTH speaker. 30mm diameter. <a href="http://cdn.sparkfun.com/datasheets/Components/General/PCBspeaker.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>SPEAKER</li></ul> >NAME >VALUE <h3>Loudspeaker</h3> >NAME >VALUE <h3>Speaker</h3> Generic 2-terminal loudspeakers <h4>SparkFun Products</h4> <ul><li><a href="https://www.sparkfun.com/products/11089">Speaker - PCB Mount</a> (COM-11089)</li> </ul> <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Plated Through Hole - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint</h3> Pins are staggered 0.005" off center to lock pins while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Pins are offset 0.005" from center to lock pins in place during soldering. Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3> Holes are offset 0.007" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin No Silk Outline</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pads</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Pogo Pins - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 5mm/197mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3> Holes are offset from center 0.005" to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle SMT</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin SMD</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Female Header</h3> Silk outline of pin location Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD- 3 Pin Right Angle Male Headers</h3> No silk outline, but tDocu layer shows pin location. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Vertical Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> <h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pad</h3> Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Plated Through Hole</h3> Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 2mm</h3> Specifications: <ul><li>Pin count:1</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pad w/ Offset Hole</h3> Specifications: <ul><li>Pin count:1</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Pogo Pin - 0.061"</h3> Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.061"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Pogo Pin Hole - 0.58" </h3> Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.58"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Sew-On Fabric Snap - Female</h3> Equivalent to size #1/0 snap. Specifications: <ul><li>Pin count: 1</li> <li>Area:8mm</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Sew-On Fabric Snap - Male</h3> Equivalent to size #1/0 snap. Specifications: <ul><li>Pin count: 1</li> <li>Area:8mm</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Spring Connector</h3> Specifications: <ul><li>Pin count: 1</li> <li>Area:0.25"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Plated Through Hole - No Silk Outline Kit Version</h3> Mask on only one side to make soldering in kits easier. Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>Plated Through Hole - No Silk Outline</h3> Specifications: <ul><li>Pin count:1</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>SMTSO-256-ET Flush Mount Nut</h3> .165 drill Fits 4-40 Screws. Specifications: <ul><li>Pin count: 1</li> </ul> Example device(s): <ul><li>CONN_01</li> </ul> >NAME >VALUE <h3>3 Pin Connection</h3> >VALUE >NAME <h3>1 Pin Connection</h3> >VALUE >NAME <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. <h3>Single connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: SMTSO-256-ET is a "flush mount" nut for a 4-40 screw. We mostly use this on specialty testbeds; it is a nice way to connect hardware to your PCB at an adjustable hieght. Also note, the SNAP packages are for using a snappable style connector. We sell a baggie of snaps and they are also used on two LilyPad designs: <ul> <li><a href="https://www.sparkfun.com/products/11347"> Snap Assortment - 30 pack (male and female)</a> (DEV-11347)</li> <li><a href="https://www.sparkfun.com/products/10941">LilyPad Arduino SimpleSnap</a> (DEV-10941)</li> <li><a href="https://www.sparkfun.com/products/10940"> LilyPad SimpleSnap Protoboard</a> (DEV-10940)</li> </ul> <h3>SparkFun Batteries</h3> This library contains battery clips, connectors, and appropriately sized silk outlines for LiPo batteries. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>AAA Battery Clips</h3> PCB mount clips properly spaced to hold a AAA battery. <a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> + - >NAME >VALUE <h3>AA Battery Clips</h3> PCB mount clips properly spaced to hold a AA battery <a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> + - >NAME >VALUE <h3>12mm Coin Cell Battery (CR1225) Holder - PTH</h3> This is a through hole 12mm coin cell battery holder. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -. <a href="https://cdn.sparkfun.com/datasheets/Prototyping/KEY-3001.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>20mm Coin Cell Battery (CR2032) Holder - SMD (Single Pad)</h3> Part number: CR2032-THM <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>20mm (CR2032) Coin Cell Battery Holder - PTH</h3> Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries. <a href="http://www.sparkfun.com/datasheets/Prototyping/CoinCellHolder-20mm.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> + - >NAME >VALUE <h3>24.5mm Coin Cell Battery (CR2450) Holder - PTH</h3> Through hole 24.5 mm coin cell holder. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -. <a href="http://www.sparkfun.com/datasheets/Batteries/Coin_Cell_Holder_245mm-3009.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>12mm Coin Cell (CR1225) Battery Holder - SMD</h3> Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side. <a href="https://cdn.sparkfun.com/datasheets/Prototyping/KEY-3000.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>20mm Coin Cell Battery (CR2032) Holder - SMD (Dual Pad)</h3> This holder fits 20mm Lithium coin cell batteries and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connected to the negative (-) side. <a href="http://cdn.sparkfun.com/datasheets/Prototyping/BAT-BLH-001.jpg">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>AA Battery Clips (KIT Variant)</h3> PCB mount clips properly spaced to hold a AA battery Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. <a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>PCMOUNT 9V Battery Holder</h3> <a href="http://www.memoryprotectiondevices.com/datasheets/BC9VPC-datasheet.pdf">Datasheet</a> (MPD BC9VPC) <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>20mm Coin Cell Battery (CR2032) Holder - SMD (Dual Pad) (Overpaste on pads)</h3> This holder fits 20mm Lithium coin cell batteries and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connected to the negative (-) side. <a href="http://cdn.sparkfun.com/datasheets/Prototyping/BAT-BLH-001.jpg">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>AAA Battery Clips (KIT Variant)</h3> PCB mount clips properly spaced to hold a AAA battery. Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. <a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> >NAME >VALUE <h3>18650 Lithium Ion Cell Battery Holders</h3> PCB mount clips properly spaced to hold a 18650 Lithium Ion Cell battery. <a href="https://cdn.sparkfun.com/datasheets/Prototyping/54.PDF">Datasheet</a> <h4>Devices Using</h4> <ul><li>BATTERY</li></ul> + - >NAME >VALUE <h3>Battery (Single-Cell)</h3> >NAME >VALUE <h3>Battery - Single Cell</h3> A variety of battery chemistries, sizes, and footprints. Device List: <ul> <li>20MM_PTH - <a href="https://www.sparkfun.com/products/783">Coin Cell Battery Holder - 20mm (PTH)</a></li> <li>12MM_SMD - <a href="https://www.sparkfun.com/products/10592">Coin Cell Battery Holder - 12mm (SMD)</a></li> <li>12MM_PTH - <a href="https://www.sparkfun.com/products/7948">Coin Cell Battery Holder - 12mm (PTH)</a></li> <li>20MM_SMD - 20mm Coin Cell Battery Holder (SMD) (2 legs)</li> <ul><li>Used on the <a href="https://www.sparkfun.com/products/11734">Big Time Watch Kit</a></li></ul> <li>20MM_SMD_4LEGS - <a href="https://www.sparkfun.com/products/11892">Coin Cell Battery Holder - 20mm (SMD)</a></li> <li>20MM_SMD_4LEGS_OVERPASTE - <a href="https://www.sparkfun.com/products/11892">Coin Cell Battery Holder - 20mm (SMD)</a> (Over-paste on the legs)</li> <li>24.5MM_PTH - <a href="https://www.sparkfun.com/products/8863">Coin Cell Battery Holder - 24.5mm (PTH)</a></li> <li>9V - 9V Battery Holder - PC Mount </li> <ul><li>Used on the <a href="https://www.sparkfun.com/products/11177">SparkFun SparkPunk Sound Kit </a> and <a href="https://www.sparkfun.com/products/12707">SparkFun SparkPunk Sequencer Kit </a></li></ul> <li>18650 - <a href="https://www.sparkfun.com/products/13113">Battery Holder - 18650 (PTH)</a></li> <li>AA - <a href="https://www.sparkfun.com/products/7949">Battery Holder - 1xAA (PTH)</a></li> <li>AAA - <a href="https://www.sparkfun.com/products/12718">Battery Holder - 1xAAA (PTH)</a></li> <li>AA_KIT - <a href="https://www.sparkfun.com/products/7949">Battery Holder - 1xAA (PTH)</a></li> <ul><li>Special kit package - pads only have exposed copper on one side of the board.</li></ul> <li>AAA_KIT - <a href="https://www.sparkfun.com/products/12718">Battery Holder - 1xAAA (PTH)</a></li> <ul><li>Special kit package - pads only have exposed copper on one side of the board.</li></ul> </ul> <h3>SparkFun Resistors</h3> This library contains resistors. Reference designator:R. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>AXIAL-0.3</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. >Name >Value <h3>AXIAL-0.1</h3> Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes. >Name >Value <h3>AXIAL-0.1-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes. Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value <h3>AXIAL-0.3-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >NAME >VALUE Generic 1608 (0603) package 0.2mm courtyard excess rounded to nearest 0.05mm. >NAME >VALUE >NAME >VALUE <h3>10kΩ resistor</h3> A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia Mounting Holes and Pads <author>Created by librarian@cadsoft.de</author> MOUNTING PAD 2.8 mm, round MOUNTING PAD 3.0 mm, round 3,0 MOUNTING PAD 3.2 mm, round 3,2 MOUNTING PAD 3.3 mm, round MOUNTING PAD 3.6 mm, round MOUNTING PAD 4.1 mm, round MOUNTING PAD 4.3 mm, round MOUNTING PAD 4.5 mm, round MOUNTING PAD 5.0 mm, round MOUNTING PAD 5.5 mm, round MOUNTING HOLE 2.8 mm with drill center MOUNTING HOLE 3.0 mm with drill center 3,0 MOUNTING HOLE 3.3 mm with drill center MOUNTING HOLE 3.6 mm with drill center MOUNTING HOLE 4.1 mm with drill center MOUNTING HOLE 4.5 mm with drill center 4,5 MOUNTING HOLE 5.0 mm with drill center 5,0 MOUNTING HOLE 3.2 mm with drill center MOUNTING HOLE 4.3 mm with drill center MOUNTING HOLE 5.5 mm with drill center >NAME >VALUE >NAME >VALUE MOUNTING PAD, round MOUNTING HOLE with drill center marker Resistors, Capacitors, Inductors Based on the previous libraries: <ul> <li>r.lbr <li>cap.lbr <li>cap-fe.lbr <li>captant.lbr <li>polcap.lbr <li>ipc-smd.lbr </ul> All SMD packages are defined according to the IPC specifications and CECC <author>Created by librarian@cadsoft.de</author> for Electrolyt Capacitors see also : www.bccomponents.com www.panasonic.com www.kemet.com http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf (SANYO) for trimmer refence see : www.electrospec-inc.com/cross_references/trimpotcrossref.asp <table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> <tr valign="top"> <! <td width="10"> </td> <td width="90%"> TRIM-POT CROSS REFERENCE <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD COLSPAN=8> RECTANGULAR MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURNS </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD><TD> </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3005P 3006P 3006W 3006Y 3009P 3009W 3009Y 3057J 3057L 3057P 3057Y 3059J 3059L 3059P 3059Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 89P 89W 89X 89PH 76P 89XH 78SLT 78L ALT 56P ALT 78P ALT T8S 78L 56P 78P </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - T18/784 783 781 - - - 2199 1697/1897 1680/1880 2187 - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 8035EKP/CT20/RJ-20P - RJ-20X - - - 1211L 8012EKQ ALT 8012EKR ALT 1211P 8012EKJ 8012EKL 8012EKQ 8012EKR </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 2101P 2101W 2101Y - - - - - - - - 2102L 2102S 2102Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVMCOG - - - - - - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 43P 43W 43Y - - - - 40L 40P 40Y 70Y-T602 70L 70P 70Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - RT/RTR12 RT/RTR12 RT/RTR12 - RJ/RJR12 RJ/RJR12 RJ/RJR12 </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SQUARE MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3250L 3250P 3250W 3250X 3252P 3252W 3252X 3260P 3260W 3260X 3262P 3262W 3262X 3266P 3266W 3266X 3290H 3290P 3290W 3292P 3292W 3292X 3296P 3296W 3296X 3296Y 3296Z 3299P 3299W 3299X 3299Y 3299Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 66P ALT 66W ALT 66X ALT 66P ALT 66W ALT 66X ALT - 64W ALT - 64P ALT 64W ALT 64X ALT 64P 64W 64X 66X ALT 66P ALT 66W ALT 66P 66W 66X 67P 67W 67X 67Y 67Z 68P 68W 68X 67Y ALT 67Z ALT </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 5050 5091 5080 5087 - - - - - - - T63YB T63XB - - - 5887 5891 5880 - - - T93Z T93YA T93XA T93YB T93XB - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 8026EKP 8026EKW 8026EKM 8026EKP 8026EKB 8026EKM 1309X 1309P 1309W 8024EKP 8024EKW 8024EKN RJ-9P/CT9P RJ-9W RJ-9X - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 3103P 3103Y 3103Z 3103P 3103Y 3103Z - - - - - - 3105P/3106P 3105W/3106W 3105X/3106X 3105Y/3106Y 3105Z/3105Z 3102P 3102W 3102X 3102Y 3102Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - - - - - - - - - - - - - EVMCBG EVMCCG - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 55-1-X 55-4-X 55-3-X 55-2-X - - - - - - - - - - - - 50-2-X 50-4-X 50-3-X - - - 64P 64W 64X 64Y 64Z - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> RT/RTR22 RT/RTR22 RT/RTR22 RT/RTR22 RJ/RJR22 RJ/RJR22 RJ/RJR22 RT/RTR26 RT/RTR26 RT/RTR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RT/RTR24 RT/RTR24 RT/RTR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 - - - - - - - </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SINGLE TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3323P 3323S 3323W 3329H 3329P 3329W 3339H 3339P 3339W 3352E 3352H 3352K 3352P 3352T 3352V 3352W 3362H 3362M 3362P 3362R 3362S 3362U 3362W 3362X 3386B 3386C 3386F 3386H 3386K 3386M 3386P 3386S 3386W 3386X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 25P 25S 25RX 82P 82M 82PA - - - 91E 91X 91T 91B 91A 91V 91W 25W 25V 25P - 25S 25U 25RX 25X 72XW 72XL 72PM 72RX - 72PX 72P 72RXW 72RXL 72X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - T7YB T7YA - - - - - - - - - - - - TXD TYA TYP - TYD TX - 150SX 100SX 102T 101S 190T 150TX 101 - - 101SX </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ET6P ET6S ET6X RJ-6W/8014EMW RJ-6P/8014EMP RJ-6X/8014EMX TM7W TM7P TM7X - 8017SMS - 8017SMB 8017SMA - - CT-6W CT-6H CT-6P CT-6R - CT-6V CT-6X - - 8038EKV - 8038EKX - - 8038EKP 8038EKZ 8038EKW - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 3321H 3321P 3321N 1102H 1102P 1102T RVA0911V304A - RVA0911H413A RVG0707V100A RVA0607V(H)306A RVA1214H213A - - - - - - - - - 3104B 3104C 3104F 3104H - 3104M 3104P 3104S 3104W 3104X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> EVMQ0G EVMQIG EVMQ3G EVMS0G EVMQ0G EVMG0G - - - EVMK4GA00B EVM30GA00B EVMK0GA00B EVM38GA00B EVMB6 EVLQ0 - EVMMSG EVMMBG EVMMAG - - EVMMCS - - - - - EVMM1 - - EVMM0 - - EVMM3 </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 62-3-1 62-1-2 - - - - - - - - - - - 67R - 67P - - - - 67X 63V 63S 63M - - 63H 63P - - 63X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - RJ/RJR50 RJ/RJR50 RJ/RJR50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - </TD> </TR> </TABLE>   <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> <TR> <TD COLSPAN=7> SMD TRIM-POT CROSS REFERENCE MULTI-TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3224G 3224J 3224W 3269P 3269W 3269X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 44G 44J 44W 84P 84W 84X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST63Z ST63Y - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST5P ST5W ST5X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> </TR> <TR> <TD COLSPAN=7>  </TD> </TR> <TR> <TD COLSPAN=7> SINGLE TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3314G 3314J 3364A/B 3364C/D 3364W/X 3313G 3313J </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 23B 23A 21X 21W - 22B 22A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST5YL/ST53YL ST5YJ/5T53YJ ST-23A ST-22B ST-22 - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST-4B ST-4A - - - ST-3B ST-3A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVM-6YS EVM-1E EVM-1G EVM-1D - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> G4B G4A TR04-3S1 TRG04-2S1 - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - DVR-43A CVR-42C CVR-42A/C - - </TD> </TR> </TABLE> ALT = ALTERNATE   </td> </tr> </table> CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE Ceramic Chip Capacitor KEMET 0204 reflow solder Metric Code Size 1005 >NAME >VALUE Ceramic Chip Capacitor KEMET 0603 reflow solder Metric Code Size 1608 >NAME >VALUE Ceramic Chip Capacitor KEMET 0805 reflow solder Metric Code Size 2012 >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 >NAME >VALUE Ceramic Chip Capacitor KEMET 1210 reflow solder Metric Code Size 3225 >NAME >VALUE Ceramic Chip Capacitor KEMET 1812 reflow solder Metric Code Size 4532 >NAME >VALUE Ceramic Chip Capacitor KEMET 1825 reflow solder Metric Code Size 4564 >NAME >VALUE Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650 >NAME >VALUE Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664 >NAME >VALUE Source: http://www.vishay.com/docs/10129/hpc0201a.pdf >NAME >VALUE Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR, European symbol ESP8266 Module 01 ESP-01 >Name >Value ESP8266 Wifi module 01 >Name >Value ESP8266 Wifi module 01 <h3>SparkFun Discrete Semiconductors</h3> This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >Name >Value SOD-323 (Small Outline Diode) >NAME >VALUE >Name >Value >Name >Value >Name >Value Conventional Si diode >NAME >VALUE <h3>Diode</h3> These are standard reverse protection diodes and small signal diodes. SparkFun Products: <ul><li><a href=”https://www.sparkfun.com/products/11177”>SparkFun SparkPunk Sound Kit</a></li> <li><a href=”https://www.sparkfun.com/products/13231”>SparkFun ESP8266 Thing</a></li> </ul> Jumpers <author>Created by librarian@cadsoft.de</author> JUMPER >NAME >VALUE >NAME >VALUE JUMPER AiiE! https://hackaday.io/project/19925-aiie-an-embedded-apple-e-emulator (c) 2016-2017 Jorj Bauer <jorj@jorj.org> rev 5 27 Jun 2017 Connect J1-J2