#include "diskii.h"

#ifdef TEENSYDUINO
#include <Arduino.h>
#else
#include <unistd.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#endif

#include "applemmu.h" // for FLOATING

#include "globals.h"

#include "diskii-rom.h"

DiskII::DiskII(AppleMMU *mmu)
{
  this->trackBuffer = new RingBuffer(NIBTRACKSIZE);
  this->rawTrackBuffer = (uint8_t *)malloc(4096);

  this->mmu = mmu;

  curTrack = 0;
  trackDirty = false;
  trackToRead = -1;
  trackToFlush = -1;

  writeMode = false;
  writeProt = false; // FIXME: expose an interface to this
  readWriteLatch = 0x00;

  disk[0] = disk[1] = -1;
  indicatorIsOn[0] = indicatorIsOn[1] = 0;
  selectedDisk = 0;
  diskType[0] = diskType[1] = dosDisk;
}

DiskII::~DiskII()
{
  delete this->trackBuffer; this->trackBuffer = NULL;
  free(this->rawTrackBuffer); this->rawTrackBuffer = NULL;
}

void DiskII::Reset()
{
  curTrack = 0;
  trackDirty = false;

  writeMode = false;
  writeProt = false; // FIXME: expose an interface to this
  readWriteLatch = 0x00;

  ejectDisk(0);
  ejectDisk(1);
}

void DiskII::checkFlush(int8_t track)
{
  if (trackDirty && trackToFlush == -1) {
    diskToFlush = selectedDisk;
    trackToFlush = track;
    trackDirty = false; // just so we don't overwrite disk/track to flush before continuing...
  }
}

uint8_t DiskII::readSwitches(uint8_t s)
{
  switch (s) {
  case 0x00: // change stepper motor phase
  case 0x01:
  case 0x02:
  case 0x03:
  case 0x04:
  case 0x05:
  case 0x06:
  case 0x07:
    step(s);
    break;

  case 0x08: // drive off
    indicatorIsOn[selectedDisk] = 99;
    g_display->setDriveIndicator(selectedDisk, false); // FIXME: after a spell...
    checkFlush(curTrack);
    break;
  case 0x09: // drive on
    indicatorIsOn[selectedDisk] = 100;
    g_display->setDriveIndicator(selectedDisk, true);
    break;

  case 0x0A: // select drive 1
    select(0);
    break;
  case 0x0B: // select drive 2
    select(1);
    break;

  case 0x0C: // shift one read or write byte
    readWriteLatch = readOrWriteByte();
    break;

  case 0x0D: // load data register (latch)
    // This is complex and incomplete. cf. Logic State Sequencer, 
    // UTA2E, p. 9-14
    if (!writeMode && indicatorIsOn[selectedDisk]) {
      if (isWriteProtected())
	readWriteLatch |= 0x80;
      else
	readWriteLatch &= 0x7F;
    }
    break;

  case 0x0E: // set read mode
    setWriteMode(false);

    // FIXME: with this shortcut here, disk access speeds up ridiculously.
    // Is this breaking anything?
    return ( (readOrWriteByte() & 0x7F) |
    (isWriteProtected() ? 0x80 : 0x00) );

    break;
  case 0x0F: // set write mode
    setWriteMode(true);
    break;
  }

  // FIXME: improve the spin-down here. We need a CPU cycle callback
  // for some period of time instead of this silly decrement counter.
  if (!indicatorIsOn[selectedDisk]) {
    //    printf("Unexpected read while disk isn't on?\n");
    indicatorIsOn[selectedDisk] = 100;
    g_display->setDriveIndicator(selectedDisk, true);
  }
  if (indicatorIsOn[selectedDisk] > 0 && indicatorIsOn[selectedDisk] < 100) {
    // slowly spin it down...
    if (--indicatorIsOn[selectedDisk] == 0) {
      g_display->setDriveIndicator(selectedDisk, false);
    }

  }

  // Any even address read returns the readWriteLatch (UTA2E Table 9.1,
  // p. 9-12, note 2)
  return (s & 1) ? FLOATING : readWriteLatch;
}

void DiskII::writeSwitches(uint8_t s, uint8_t v)
{
  switch (s) {
  case 0x00: // change stepper motor phase
  case 0x01:
  case 0x02:
  case 0x03:
  case 0x04:
  case 0x05:
  case 0x06:
  case 0x07:
    step(s);
    break;

  case 0x08: // drive off
    break;
  case 0x09: // drive on
    break;

  case 0x0A: // select drive 1
    select(0);
    break;
  case 0x0B: // select drive 2
    select(1);
    break;

  case 0x0C: // shift one read or write byte
    readOrWriteByte();
    break;

  case 0x0D: // drive write
    break;

  case 0x0E: // set read mode
    setWriteMode(false);
    break;

  case 0x0F: // set write mode
    setWriteMode(true);
    break;
  }

  // All writes update the latch
  if (writeMode) {
    readWriteLatch = v;
  }
}

// where phase is the address poked & 0x07 (e.g. "0xC0E0 & 0x07")
void DiskII::step(uint8_t phase)
{
  static int mag[4] = { 0,0,0,0 };
  static int pmag[4] = { 0, 0, 0, 0 }; 
  static int ppmag[4] = { 0, 0, 0, 0 };
  static int pnum = 0;
  static int ppnum = 0;
  static int trackPos = 0;
  static int prevTrack = 0;

  //  phase &= 7;
  int magnet_number = phase >> 1;

  // shuffle data down
  ppmag[ppnum] = pmag[ppnum];
  ppnum = pnum;
  pmag[pnum] = mag[pnum];
  pnum = magnet_number;

  if ((phase & 1) == 0) {
    mag[magnet_number] = 0;
  } else {
    if (ppmag[(magnet_number + 1) & 3]) {
      if (--trackPos < 0) {
	trackPos = 0;
	// recalibrate...
      }
    }

    if (ppmag[(magnet_number - 1) & 3]) {
      // FIXME: don't go beyond the end of the media. For a 35-track disk, that's 68 == ((35-1) * 2).
      if (++trackPos > 68) {
	trackPos = 68;
      }
    }
    mag[magnet_number] = 1;
  }

  curTrack = (trackPos + 1) / 2;
  if (curTrack != prevTrack) {
    // We're about to change tracks - be sure to flush the track if we've written to it
    checkFlush(prevTrack);

    // step to the appropriate track
    prevTrack = curTrack;
    // mark it to be read
    trackToRead = curTrack;
  }
}

bool DiskII::isWriteProtected()
{
  return (writeProt ? 0xFF : 0x00);
}

void DiskII::setWriteMode(bool enable)
{
  writeMode = enable;
}

static uint8_t _lc(char c)
{
  if (c >= 'A' && c <= 'Z') {
    c = c - 'A' + 'a';
  }
  return c;
}

static bool _endsWithI(const char *s1, const char *s2)
{
  if (strlen(s2) > strlen(s1)) {
    return false;
  }
  
  const char *p = &s1[strlen(s1)-1];
  int16_t l = strlen(s2)-1;
  while (l >= 0) {
    if (_lc(*p--) != _lc(s2[l]))
      return false;
    l--;
  }
  return true;
}

void DiskII::insertDisk(int8_t driveNum, const char *filename, bool drawIt)
{
  ejectDisk(driveNum);
  disk[driveNum] = g_filemanager->openFile(filename);
  if (drawIt)
    g_display->drawDriveDoor(driveNum, false);

  if (_endsWithI(filename, ".nib")) {
    diskType[driveNum] = nibDisk;
  } else if (_endsWithI(filename, ".po")) {
    diskType[driveNum] = prodosDisk;
  } else {
    diskType[driveNum] = dosDisk;
#ifndef TEENSYDUINO
    // debugging: make a nib copy of the image to play with
    //    convertDskToNib("/tmp/debug.nib");
#endif
  }
}

void DiskII::ejectDisk(int8_t driveNum)
{
  if (disk[driveNum] != -1) {
    g_filemanager->closeFile(disk[driveNum]);
    disk[driveNum] = -1;
    g_display->drawDriveDoor(driveNum, true);
  }
}

void DiskII::select(int8_t which)
{
  if (which != 0 && which != 1)
    return;

  if (which != selectedDisk) {
    indicatorIsOn[selectedDisk] = 0;
    g_display->setDriveIndicator(selectedDisk, false);

    checkFlush(curTrack);
  }

  // set the selected disk drive
  selectedDisk = which;
}

uint8_t DiskII::readOrWriteByte()
{
  if (disk[selectedDisk] == -1) {
    return GAP;
  }

  if (writeMode && !writeProt) {

    if (!trackBuffer->hasData()) {
      // Error: writing to empty track buffer? That's a raw write w/o
      // knowing where we are on the disk.
      return GAP;
    }

    trackDirty = true;
    // It's possible that a badly behaving OS could try to write more
    // data than we have buffer to handle. Don't let it. We should
    // only need something like 500 bytes, at worst. In the typical
    // case, we're talking about something like
    //
    // ~5 bytes of GAP
    // 3 bytes of sector prolog
    // 2 bytes of volume
    // 2 bytes of track
    // 2 bytes of sector
    // 2 bytes of checksum
    // 2 bytes of epilog
    // ~5 bytes of GAP
    // 3 bytes of data prolog
    // 342 bytes of GRP-encoded (6:2) data
    // 1 byte of checksum
    // 3 bytes of epilog
    // 1 byte of GAP
    // == 373 bytes
    //
    // ... so if we get up to the full 1024 we've allocated, there's
    // something suspicious happening.

    if (readWriteLatch < 0x96) {
      // Can't write a de-nibblized byte...
      g_display->debugMsg("DII: bad write");
      return 0;
    }

    trackBuffer->replaceByte(readWriteLatch);

    return 0;
  }

  // trackToRead is -1 when we have a filled buffer, or we have no data at all.
  // trackToRead is != -1 when we're flushing our buffer and re-filling it.
  // 
  // Don't fill it right here, b/c we don't want to bog down the CPU
  // thread/ISR.
  if (trackToRead == curTrack) {// waiting for a read to complete
    return GAP;
  }

  if ((trackToRead != -1) || !trackBuffer->hasData()) {
    checkFlush(curTrack);

    // Need to read in a track of data and nibblize it. We'll return 0xFF
    // until that completes.

    // This might update trackToRead with a different track than the
    // one we're reading. When we finish the read, we'll need to check
    // to be sure that we're still trying to read the same track that
    // we started with.
    trackToRead = curTrack;

    // While we're waiting for the sector to come around, we'll return
    // GAP bytes.
    return GAP;
  }

  return trackBuffer->peekNext();
}

void DiskII::fillDiskBuffer()
{
  if (trackToFlush != -1) {
    flushTrack(trackToFlush, diskToFlush); // in case it's dirty: flush before changing drives
    trackBuffer->clear();
    
    trackToFlush = -1;
  }

  // No work to do if trackToRead is -1
  if (trackToRead == -1)
    return;

  trackDirty = false;
  trackBuffer->clear();

  int8_t trackWeAreReading = trackToRead;
  int8_t diskWeAreUsing = selectedDisk;

  trackBuffer->clear();
  trackBuffer->setPeekCursor(0);

  if (diskType[diskWeAreUsing] == nibDisk) {
    // Read one nibblized sector at a time and jam it in trackBuf
    // directly.  We don't read the whole track at once only because
    // of RAM constraints on the Teensy. There's no reason we
    // couldn't, though, if RAM weren't at a premium.
    
    for (int i=0; i<16; i++) {
      g_filemanager->seekBlock(disk[diskWeAreUsing], trackWeAreReading * 16 + i, diskType[diskWeAreUsing] == nibDisk);
      if (!g_filemanager->readBlock(disk[diskWeAreUsing], rawTrackBuffer, diskType[diskWeAreUsing] == nibDisk)) {
	// FIXME: error handling?
	trackToRead = -1;
	return;
      }
      trackBuffer->addBytes(rawTrackBuffer, 416);
    }
  } else {
    // It's a .dsk / .po disk image. Read the whole track in to
    // rawTrackBuffer and nibblize it.
    g_filemanager->seekBlock(disk[diskWeAreUsing], trackWeAreReading * 16, diskType[diskWeAreUsing] == nibDisk);
    if (!g_filemanager->readTrack(disk[diskWeAreUsing], rawTrackBuffer, diskType[diskWeAreUsing] == nibDisk)) {
      // FIXME: error handling?
      trackToRead = -1;
      return;
    }

    nibblizeTrack(trackBuffer, rawTrackBuffer, diskType[diskWeAreUsing], curTrack);
  }

  // Make sure we're still intending to read the track we just read
  if (trackWeAreReading != trackToRead ||
      diskWeAreUsing != selectedDisk) {
    // Abort and let it start over next time
    return;
  }

  // Buffer is full, we're done - reset trackToRead and that will let the reads reach the CPU!
  trackToRead = -1;
}

const char *DiskII::DiskName(int8_t num)
{
  if (disk[num] != -1)
    return g_filemanager->fileName(disk[num]);

  return "";
}

void DiskII::loadROM(uint8_t *toWhere)
{
#ifdef TEENSYDUINO
  Serial.println("loading DiskII rom");
  for (uint16_t i=0; i<=0xFF; i++) {
    toWhere[i] = pgm_read_byte(&romData[i]);
  }
#else
  printf("loading DiskII rom\n");
  memcpy(toWhere, romData, 256);
#endif
}

void DiskII::flushTrack(int8_t track, int8_t sel)
{
  // safety check: if we're write-protected, then how did we get here?
  if (writeProt) {
    g_display->debugMsg("Write Protected");
    return;
  }

  if (!trackBuffer->hasData()) {
    // Dunno what happened - we're writing but haven't initialized the sector buffer?
    return;
  }

  if (diskType[sel] == nibDisk) {
    // Write the whole track out exactly as we've got it. Hopefully
    // someone has re-calcuated appropriate checksums on it...
    g_display->debugMsg("Not writing Nib image");
    return;
  }

  nibErr e = denibblizeTrack(trackBuffer, rawTrackBuffer, diskType[sel], curTrack);
  switch (e) {
  case errorShortTrack:
    g_display->debugMsg("DII: short track");
    trackBuffer->clear();
    return;

  case errorMissingSectors:
    g_display->debugMsg("DII: missing sectors");
    trackBuffer->clear();
    break;

  case errorNone:
    break;
  }

  // ok, write the track!
  g_filemanager->seekBlock(disk[sel], track * 16);
  g_filemanager->writeTrack(disk[sel], rawTrackBuffer);
}