aiie/teensy/teensy-display.cpp

568 lines
17 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#include <ctype.h> // isgraph
#include "teensy-display.h"
#include "bios-font.h"
#include "display-bg.h"
#define RS 16
#define WR 17
#define CS 18
#define RST 19
// Ports C&D of the Teensy connected to DB of the display
#define DB_0 15
#define DB_1 22
#define DB_2 23
#define DB_3 9
#define DB_4 10
#define DB_5 13
#define DB_6 11
#define DB_7 12
#define DB_8 2
#define DB_9 14
#define DB_10 7
#define DB_11 8
#define DB_12 6
#define DB_13 20
#define DB_14 21
#define DB_15 5
#define disp_x_size 239
#define disp_y_size 319
#define setPixel(color) { LCD_Write_DATA(((color)>>8),((color)&0xFF)); } // 565 RGB
#include "globals.h"
#include "applevm.h"
// RGB map of each of the lowres colors
const uint16_t loresPixelColors[16] = { 0x0000, // 0 black
0xC006, // 1 magenta
0x0010, // 2 dark blue
0xA1B5, // 3 purple
0x0480, // 4 dark green
0x6B4D, // 5 dark grey
0x1B9F, // 6 med blue
0x0DFD, // 7 light blue
0x92A5, // 8 brown
0xF8C5, // 9 orange
0x9555, // 10 light gray
0xFCF2, // 11 pink
0x07E0, // 12 green
0xFFE0, // 13 yellow
0x87F0, // 14 aqua
0xFFFF // 15 white
};
TeensyDisplay::TeensyDisplay()
{
pinMode(DB_8, OUTPUT);
pinMode(DB_9, OUTPUT);
pinMode(DB_10, OUTPUT);
pinMode(DB_11, OUTPUT);
pinMode(DB_12, OUTPUT);
pinMode(DB_13, OUTPUT);
pinMode(DB_14, OUTPUT);
pinMode(DB_15, OUTPUT);
pinMode(DB_0, OUTPUT);
pinMode(DB_1, OUTPUT);
pinMode(DB_2, OUTPUT);
pinMode(DB_3, OUTPUT);
pinMode(DB_4, OUTPUT);
pinMode(DB_5, OUTPUT);
pinMode(DB_6, OUTPUT);
pinMode(DB_7, OUTPUT);
P_RS = portOutputRegister(digitalPinToPort(RS));
B_RS = digitalPinToBitMask(RS);
P_WR = portOutputRegister(digitalPinToPort(WR));
B_WR = digitalPinToBitMask(WR);
P_CS = portOutputRegister(digitalPinToPort(CS));
B_CS = digitalPinToBitMask(CS);
P_RST = portOutputRegister(digitalPinToPort(RST));
B_RST = digitalPinToBitMask(RST);
pinMode(RS,OUTPUT);
pinMode(WR,OUTPUT);
pinMode(CS,OUTPUT);
pinMode(RST,OUTPUT);
// begin initialization
sbi(P_RST, B_RST);
delay(5);
cbi(P_RST, B_RST);
delay(15);
sbi(P_RST, B_RST);
delay(15);
cbi(P_CS, B_CS);
LCD_Write_COM_DATA(0x00,0x0001); // oscillator start [enable]
LCD_Write_COM_DATA(0x03,0xA8A4); // power control [%1010 1000 1010 1000] == DCT3, DCT1, BT2, DC3, DC1, AP2
LCD_Write_COM_DATA(0x0C,0x0000); // power control2 [0]
LCD_Write_COM_DATA(0x0D,0x080C); // power control3 [VRH3, VRH2, invalid bits]
LCD_Write_COM_DATA(0x0E,0x2B00); // power control4 VCOMG, VDV3, VDV1, VDV0
LCD_Write_COM_DATA(0x1E,0x00B7); // power control5 nOTP, VCM5, VCM4, VCM2, VCM1, VCM0
// LCD_Write_COM_DATA(0x01,0x2B3F); // driver control output REV, BGR, TB, MUX8, MUX5, MUX4, MUX3, MUX2, MUX1, MUX0
// Change that: TB = 0 please
LCD_Write_COM_DATA(0x01,0x293F); // driver control output REV, BGR, TB, MUX8, MUX5, MUX4, MUX3, MUX2, MUX1, MUX0
// LCD_Write_COM_DATA(0x01,0x693F); // driver control output RL, REV, BGR, TB, MUX8, MUX5, MUX4, MUX3, MUX2, MUX1, MUX0
LCD_Write_COM_DATA(0x02,0x0600); // LCD drive AC control B/C, EOR
LCD_Write_COM_DATA(0x10,0x0000); // sleep mode 0
// Change the (Y) order here to match above (TB=0)
//LCD_Write_COM_DATA(0x11,0x6070); // Entry mode DFM1, DFM0, TY0, ID1, ID0
//LCD_Write_COM_DATA(0x11,0x6050); // Entry mode DFM1, DFM0, TY0, ID0
LCD_Write_COM_DATA(0x11,0x6078); // Entry mode DFM1, DFM0, TY0, ID1, ID0, AM
LCD_Write_COM_DATA(0x05,0x0000); // compare reg1
LCD_Write_COM_DATA(0x06,0x0000); // compare reg2
LCD_Write_COM_DATA(0x16,0xEF1C); // horiz porch (default)
LCD_Write_COM_DATA(0x17,0x0003); // vertical porch
LCD_Write_COM_DATA(0x07,0x0233); // display control VLE1, GON, DTE, D1, D0
LCD_Write_COM_DATA(0x0B,0x0000); // frame cycle control
LCD_Write_COM_DATA(0x0F,0x0000); // gate scan start posn
LCD_Write_COM_DATA(0x41,0x0000); // vertical scroll control1
LCD_Write_COM_DATA(0x42,0x0000); // vertical scroll control2
LCD_Write_COM_DATA(0x48,0x0000); // first window start
LCD_Write_COM_DATA(0x49,0x013F); // first window end (0x13f == 319)
LCD_Write_COM_DATA(0x4A,0x0000); // second window start
LCD_Write_COM_DATA(0x4B,0x0000); // second window end
LCD_Write_COM_DATA(0x44,0xEF00); // horiz ram addr posn
LCD_Write_COM_DATA(0x45,0x0000); // vert ram start posn
LCD_Write_COM_DATA(0x46,0x013F); // vert ram end posn
LCD_Write_COM_DATA(0x30,0x0707); // γ control
LCD_Write_COM_DATA(0x31,0x0204);//
LCD_Write_COM_DATA(0x32,0x0204);//
LCD_Write_COM_DATA(0x33,0x0502);//
LCD_Write_COM_DATA(0x34,0x0507);//
LCD_Write_COM_DATA(0x35,0x0204);//
LCD_Write_COM_DATA(0x36,0x0204);//
LCD_Write_COM_DATA(0x37,0x0502);//
LCD_Write_COM_DATA(0x3A,0x0302);//
LCD_Write_COM_DATA(0x3B,0x0302);//
LCD_Write_COM_DATA(0x23,0x0000);// RAM write data mask1
LCD_Write_COM_DATA(0x24,0x0000); // RAM write data mask2
LCD_Write_COM_DATA(0x25,0x8000); // frame frequency (OSC3)
LCD_Write_COM_DATA(0x4f,0x0000); // Set GDDRAM Y address counter
LCD_Write_COM_DATA(0x4e,0x0000); // Set GDDRAM X address counter
#if 0
// Set data access speed optimization (?)
LCD_Write_COM_DATA(0x28, 0x0006);
LCD_Write_COM_DATA(0x2F, 0x12BE);
LCD_Write_COM_DATA(0x12, 0x6CEB);
#endif
LCD_Write_COM(0x22); // RAM data write
sbi(P_CS, B_CS);
// LCD initialization complete
setColor(255, 255, 255);
clrScr();
driveIndicator[0] = driveIndicator[1] = false;
driveIndicatorDirty = true;
}
TeensyDisplay::~TeensyDisplay()
{
}
void TeensyDisplay::_fast_fill_16(int ch, int cl, long pix)
{
*(volatile uint8_t *)(&GPIOD_PDOR) = ch;
*(volatile uint8_t *)(&GPIOC_PDOR) = cl;
uint16_t blocks = pix / 16;
for (uint16_t i=0; i<blocks; i++) {
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
pulse_low(P_WR, B_WR);
}
if ((pix % 16) != 0) {
for (int i=0; i<(pix % 16); i++)
{
pulse_low(P_WR, B_WR);
}
}
}
void TeensyDisplay::redraw()
{
cbi(P_CS, B_CS);
clrXY();
sbi(P_RS, B_RS);
moveTo(0, 0);
for (int y=0; y<240; y++) {
for (int x=0; x<320; x++) {
uint8_t r = pgm_read_byte(&displayBitmap[(y * 320 + x)*3 + 0]);
uint8_t g = pgm_read_byte(&displayBitmap[(y * 320 + x)*3 + 1]);
uint8_t b = pgm_read_byte(&displayBitmap[(y * 320 + x)*3 + 2]);
uint16_t color16 = ((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3);
setPixel(color16);
}
}
if (g_vm) {
drawDriveDoor(0, ((AppleVM *)g_vm)->DiskName(0)[0] == '\0');
drawDriveDoor(1, ((AppleVM *)g_vm)->DiskName(1)[0] == '\0');
}
cbi(P_CS, B_CS);
clrXY();
sbi(P_RS, B_RS);
}
void TeensyDisplay::clrScr()
{
cbi(P_CS, B_CS);
clrXY();
sbi(P_RS, B_RS);
_fast_fill_16(0, 0, ((disp_x_size+1)*(disp_y_size+1)));
sbi(P_CS, B_CS);
}
// The display flips X and Y, so expect to see "x" as "vertical"
// and "y" as "horizontal" here...
void TeensyDisplay::setYX(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
{
LCD_Write_COM_DATA(0x44, (y2<<8)+y1); // Horiz start addr, Horiz end addr
LCD_Write_COM_DATA(0x45, x1); // vert start pos
LCD_Write_COM_DATA(0x46, x2); // vert end pos
LCD_Write_COM_DATA(0x4e,y1); // RAM address set (horiz)
LCD_Write_COM_DATA(0x4f,x1); // RAM address set (vert)
LCD_Write_COM(0x22);
}
void TeensyDisplay::clrXY()
{
setYX(0, 0, disp_y_size, disp_x_size);
}
void TeensyDisplay::setColor(byte r, byte g, byte b)
{
fch=((r&248)|g>>5);
fcl=((g&28)<<3|b>>3);
}
void TeensyDisplay::setColor(uint16_t color)
{
fch = (uint8_t)(color >> 8);
fcl = (uint8_t)(color & 0xFF);
}
void TeensyDisplay::fillRect(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
{
if (x1>x2) {
swap(uint16_t, x1, x2);
}
if (y1 > y2) {
swap(uint16_t, y1, y2);
}
cbi(P_CS, B_CS);
setYX(x1, y1, x2, y2);
sbi(P_RS, B_RS);
_fast_fill_16(fch,fcl,((long(x2-x1)+1)*(long(y2-y1)+1)));
sbi(P_CS, B_CS);
}
void TeensyDisplay::drawPixel(uint16_t x, uint16_t y)
{
cbi(P_CS, B_CS);
setYX(x, y, x, y);
setPixel((fch<<8)|fcl);
sbi(P_CS, B_CS);
clrXY();
}
void TeensyDisplay::drawPixel(uint16_t x, uint16_t y, uint16_t color)
{
cbi(P_CS, B_CS);
setYX(x, y, x, y);
setPixel(color);
sbi(P_CS, B_CS);
clrXY();
}
void TeensyDisplay::drawPixel(uint16_t x, uint16_t y, uint8_t r, uint8_t g, uint8_t b)
{
uint16_t color16 = ((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3);
cbi(P_CS, B_CS);
setYX(x, y, x, y);
setPixel(color16);
sbi(P_CS, B_CS);
clrXY();
}
void TeensyDisplay::LCD_Writ_Bus(uint8_t ch, uint8_t cl)
{
*(volatile uint8_t *)(&GPIOD_PDOR) = ch;
*(volatile uint8_t *)(&GPIOC_PDOR) = cl;
pulse_low(P_WR, B_WR);
}
void TeensyDisplay::LCD_Write_COM(uint8_t VL)
{
cbi(P_RS, B_RS);
LCD_Writ_Bus(0x00, VL);
}
void TeensyDisplay::LCD_Write_DATA(uint8_t VH, uint8_t VL)
{
sbi(P_RS, B_RS);
LCD_Writ_Bus(VH,VL);
}
void TeensyDisplay::LCD_Write_DATA(uint8_t VL)
{
sbi(P_RS, B_RS);
LCD_Writ_Bus(0x00, VL);
}
void TeensyDisplay::LCD_Write_COM_DATA(uint8_t com1, uint16_t dat1)
{
LCD_Write_COM(com1);
LCD_Write_DATA(dat1>>8, dat1);
}
void TeensyDisplay::moveTo(uint16_t col, uint16_t row)
{
cbi(P_CS, B_CS);
// FIXME: eventually set drawing to the whole screen and leave it that way
// set drawing to the whole screen
// setYX(0, 0, disp_y_size, disp_x_size);
LCD_Write_COM_DATA(0x4e,row); // RAM address set (horiz)
LCD_Write_COM_DATA(0x4f,col); // RAM address set (vert)
LCD_Write_COM(0x22);
}
void TeensyDisplay::drawNextPixel(uint16_t color)
{
// Anything inside this object should call setPixel directly. This
// is primarily for the BIOS.
setPixel(color);
}
void TeensyDisplay::blit(AiieRect r)
{
uint8_t *videoBuffer = g_vm->videoBuffer; // FIXME: poking deep
// remember these are "starts at pixel number" values, where 0 is the first.
#define HOFFSET 18
#define VOFFSET 13
// Define the horizontal area that we're going to draw in
LCD_Write_COM_DATA(0x45, HOFFSET+r.left); // offset by 20 to center it...
LCD_Write_COM_DATA(0x46, HOFFSET+r.right);
// position the "write" address
LCD_Write_COM_DATA(0x4e,VOFFSET+r.top); // row
LCD_Write_COM_DATA(0x4f,HOFFSET+r.left); // col
// prepare the LCD to receive data bytes for its RAM
LCD_Write_COM(0x22);
// send the pixel data
sbi(P_RS, B_RS);
uint16_t pixel;
for (uint8_t y=r.top; y<=r.bottom; y++) {
for (uint16_t x=r.left; x<=r.right; x++) {
pixel = y * (DISPLAYWIDTH/2) + (x/2);
uint8_t colorIdx;
if (!(x & 0x01)) {
colorIdx = videoBuffer[pixel] >> 4;
} else {
colorIdx = videoBuffer[pixel] & 0x0F;
}
LCD_Writ_Bus(loresPixelColors[colorIdx]>>8,loresPixelColors[colorIdx]);
}
}
cbi(P_CS, B_CS);
// draw overlay, if any
if (overlayMessage[0]) {
// reset the viewport in order to draw the overlay...
LCD_Write_COM_DATA(0x45, 0);
LCD_Write_COM_DATA(0x46, 319);
drawString(M_SELECTDISABLED, 1, 240 - 16 - 12, overlayMessage);
}
redrawDriveIndicators();
}
void TeensyDisplay::drawCharacter(uint8_t mode, uint16_t x, uint8_t y, char c)
{
int8_t xsize = 8,
ysize = 0x0C,
offset = 0x20;
uint16_t temp;
c -= offset;// font starts with a space
uint16_t offPixel, onPixel;
switch (mode) {
case M_NORMAL:
onPixel = 0xFFFF;
offPixel = 0x0010;
break;
case M_SELECTED:
onPixel = 0x0000;
offPixel = 0xFFFF;
break;
case M_DISABLED:
default:
onPixel = 0x7BEF;
offPixel = 0x0000;
break;
case M_SELECTDISABLED:
onPixel = 0x7BEF;
offPixel = 0xFFE0;
break;
}
temp=(c*ysize);
for (int8_t y_off = 0; y_off <= ysize; y_off++) {
moveTo(x, y + y_off);
uint8_t ch = pgm_read_byte(&BiosFont[temp]);
for (int8_t x_off = 0; x_off <= xsize; x_off++) {
if (ch & (1 << (7-x_off))) {
setPixel(onPixel);
} else {
setPixel(offPixel);
}
}
temp++;
}
}
void TeensyDisplay::drawString(uint8_t mode, uint16_t x, uint8_t y, const char *str)
{
int8_t xsize = 8; // width of a char in this font
for (int8_t i=0; i<strlen(str); i++) {
drawCharacter(mode, x, y, str[i]);
x += xsize; // fixme: any inter-char spacing?
}
}
void TeensyDisplay::drawDriveDoor(uint8_t which, bool isOpen)
{
// location of drive door for left drive
uint16_t xoff = 55;
uint16_t yoff = 216;
// location for right drive
if (which == 1) {
xoff += 134;
}
for (int y=0; y<20; y++) {
for (int x=0; x<43; x++) {
uint8_t r, g, b;
if (isOpen) {
r = pgm_read_byte(&driveLatchOpen[(y * 43 + x)*3 + 0]);
g = pgm_read_byte(&driveLatchOpen[(y * 43 + x)*3 + 1]);
b = pgm_read_byte(&driveLatchOpen[(y * 43 + x)*3 + 2]);
} else {
r = pgm_read_byte(&driveLatch[(y * 43 + x)*3 + 0]);
g = pgm_read_byte(&driveLatch[(y * 43 + x)*3 + 1]);
b = pgm_read_byte(&driveLatch[(y * 43 + x)*3 + 2]);
}
drawPixel(x+xoff, y+yoff, r, g, b);
}
}
}
void TeensyDisplay::setDriveIndicator(uint8_t which, bool isRunning)
{
driveIndicator[which] = isRunning;
driveIndicatorDirty = true;
}
void TeensyDisplay::redrawDriveIndicators()
{
if (driveIndicatorDirty) {
// location of status indicator for left drive
uint16_t xoff = 125;
uint16_t yoff = 213;
for (int which = 0; which <= 1; which++,xoff += 135) {
for (int y=0; y<2; y++) {
for (int x=0; x<6; x++) {
drawPixel(x + xoff, y + yoff, driveIndicator[which] ? 0xF800 : 0x8AA9);
}
}
}
driveIndicatorDirty = false;
}
}
void TeensyDisplay::drawBatteryStatus(uint8_t percent)
{
uint16_t xoff = 300;
uint16_t yoff = 222;
// the area around the apple is 12 wide
// it's exactly 11 high
// the color is 210/202/159
float watermark = ((float)percent / 100.0) * 11;
for (int y=0; y<11; y++) {
uint8_t bgr = 210;
uint8_t bgg = 202;
uint8_t bgb = 159;
if (11-y > watermark) {
// black...
bgr = bgg = bgb = 0;
}
for (int x=0; x<11; x++) {
uint8_t *p = &appleBitmap[(y * 10 + (x-1))*4];
// It's RGBA; blend w/ background color
uint8_t r,g,b;
float alpha = (float)pgm_read_byte(&appleBitmap[(y * 10 + (x-1))*4 + 3]) / 255.0;
r = (float)pgm_read_byte(&appleBitmap[(y * 10 + (x-1))*4 + 0])
* alpha + (bgr * (1.0 - alpha));
g = (float)pgm_read_byte(&appleBitmap[(y * 10 + (x-1))*4 + 1])
* alpha + (bgr * (1.0 - alpha));
b = (float)pgm_read_byte(&appleBitmap[(y * 10 + (x-1))*4 + 2])
* alpha + (bgr * (1.0 - alpha));
drawPixel(x+xoff, y+yoff, r, g, b);
}
}
}