analog/v2-analog-rev1/common/main.c
David Kuder 1407b3a20f Diagnostic Mode
MODE=DIAG allows testing the card addressing via the PicoPal chip.
2023-01-08 00:37:25 -05:00

97 lines
2.1 KiB
C

#include <stdio.h>
#include <pico/stdlib.h>
#include <pico/multicore.h>
#include "common/abus.h"
#include "common/config.h"
#include "common/modes.h"
#include "pico_hal.h"
#ifdef RASPBERRYPI_PICO_W
#include <pico/cyw43_arch.h>
#endif
volatile uint8_t core1_running = 0;
static void core1_loop() {
for(;;) {
switch(v2mode) {
case MODE_DIAG:
core1_running = 1;
diag_businterface();
core1_running = 0;
break;
case MODE_VGACARD:
core1_running = 1;
vga_businterface();
core1_running = 0;
break;
case MODE_APPLICARD:
core1_running = 1;
z80_businterface();
core1_running = 0;
break;
case MODE_SERIAL:
core1_running = 1;
serial_businterface();
core1_running = 0;
break;
case MODE_PARALLEL:
core1_running = 1;
parallel_businterface();
core1_running = 0;
break;
}
}
}
static void core0_loop() {
for(;;) {
switch(v2mode) {
case MODE_REBOOT:
flash_reboot();
break;
case MODE_VGACARD:
vgamain();
break;
case MODE_APPLICARD:
z80main();
break;
case MODE_SERIAL:
serialmain();
break;
case MODE_PARALLEL:
parallelmain();
break;
default:
v2mode = MODE_VGACARD;
}
while(core1_running) {
sleep_ms(5);
};
}
}
int main() {
// Adjust system clock for better dividing into other clocks
set_sys_clock_khz(CONFIG_SYSCLOCK*1000, true);
abus_init();
// Sensible defaults if there is no config / fs
default_config();
// Try mounting the LittleFS, or format if it isn't there.
if(pico_mount(0) == LFS_ERR_OK) {
read_config();
} else if(pico_mount(1) == LFS_ERR_OK) {
read_config();
}
multicore_launch_core1(core1_loop);
core0_loop();
return 0;
}