∀2 Analog VGA card for the Apple II computer line
Go to file
2023-05-02 20:16:05 -04:00
analog-firmware@813118b3c8 Update analog-firmware 2023-05-02 20:16:05 -04:00
analog-hardware@113c564c61 Update analog-hardware 2023-04-17 01:39:19 -04:00
analog-preload@d79c8724b3 Project files reorg 2023-04-17 01:23:34 -04:00
analog-utilities@8c512512a7 Update sub projects 2023-05-02 19:55:56 -04:00
docs Updated logo 2023-01-07 02:24:35 -05:00
picopal-v1@dbde4b1a4b Project files reorg 2023-04-17 01:23:34 -04:00
.gitignore Ignore build-lc folder 2023-03-02 14:40:18 -05:00
.gitmodules Project files reorg 2023-04-17 01:23:34 -04:00
LICENSE Updated license 2023-01-07 02:22:26 -05:00
README.md Update README.md 2023-04-17 01:32:37 -04:00

V2Logo

∀2 Retro Computing Analog VGA Card & PicoPal

PicoPal Logo

Repo reorg

This repo is now the root of a multi-project tree. Continue to use this repo to report issues with the hardware or firmware.

Building the project files

Clone this repo and issue the following command to pull in the submodules

# git submodule update --init

The build.sh script in the analog-firmware project will build all the firmware variants. If you wish to build a single variant, check the build.sh script for the syntax for the build folders.

When setting up a new card or upgrading from the older monolithic firmware, it is neccessary to use the flash preloader to format the configuration areas and install the fonts. This only has to be done once, or if you want to restore the default fonts after uploading new ones.

Sub-projects

Flash Preloader | Firmware | Utilities | Hardware | PicoPal V1

Acknowledgements

This is a fork of Mark Aikens Apple II VGA project with a new board design, custom logic in an ATF16V8C to handle card select lines, and upgraded firmware with many new features.

Full details on purchasing and screenshots are available at ∀2 Retro Computing.