Commit Graph

52 Commits

Author SHA1 Message Date
Matthew Nielsen
b489ea44e4 Change board branding to "BlueGS / BP" to distinguish it from rp2040-based design.
Move cd card slot back slightly.
2023-01-26 08:19:42 -07:00
Matthew Nielsen
c1af1af643 Fix overlapping text; change CC back to silkscreen 2022-12-19 10:41:43 -07:00
Matthew Nielsen
9448e48c20 move silks around 2022-12-19 09:58:16 -07:00
Matthew Nielsen
97288459e5 move aux 5v connector a bit lower 2022-12-15 20:11:51 -07:00
Matthew Nielsen
6639b90b0a Oshpark test fab 2022-12-12 20:12:25 -07:00
Matthew Nielsen
720edbae37 Add silkscreen notes about connections 2022-12-05 14:02:44 -07:00
Matthew Nielsen
4233d11728 move 3v3 via slightly so its inline with others 2022-12-05 13:51:00 -07:00
Matthew Nielsen
766b2d503d Give that via more space, we have it! 2022-12-05 13:47:08 -07:00
Matthew Nielsen
d8fe09677d Push C4 a little higher to get it out of the way pf wires 2022-12-05 13:41:46 -07:00
Matthew Nielsen
d7a2374bdc shove trace away from via a little 2022-12-05 13:35:00 -07:00
Matthew Nielsen
95936ac76a Move some capacitors around, add more silkscreen notes 2022-12-05 13:34:14 -07:00
Matthew Nielsen
6e06a281b1 Push more traces around to maximize infill 2022-12-05 12:58:45 -07:00
Matthew Nielsen
58f0fb0cc6 straighter shot for DBP line 2022-12-05 12:51:44 -07:00
Matthew Nielsen
1937f13873 Move Termpower decoupling cap closer to the connector (as per specs) 2022-12-05 12:47:53 -07:00
Matthew Nielsen
27c404a063 Move power controller to front for better wire clearance in tight cases 2022-12-05 12:11:46 -07:00
Matthew Nielsen
6b2d4068ba Make name more consistent, move sinkscreens around to make things look better 2022-12-05 11:23:03 -07:00
Matthew Nielsen
da9b32bb14 Push traces around, remove a hyphen 2022-12-02 16:53:21 -07:00
Matthew Nielsen
45fef4e732 Added compatibility for 74LVC1G125SE in place of NL17SZ07DFT2G 2022-12-02 16:00:22 -07:00
Matthew Nielsen
f6d6ab4443 Increase card indent, change C5 footprint 2022-12-02 15:28:47 -07:00
Matthew Nielsen
17897debc3 Move power and led headers to better positon; Add indentation around microsd slot 2022-12-02 14:29:10 -07:00
Matthew Nielsen
16e751cb99 Change 7805 to UCC3916; nudge some traces to get better gnds 2022-11-20 14:11:09 -07:00
Matthew Nielsen
dc1de6e24d I should have done a changelog a long time ago 2022-11-20 12:02:47 -07:00
Matthew Nielsen
5c3023198a v1.3.1 commit 2022-10-06 22:39:35 -06:00
Matthew Nielsen
97b2636693 Re-annotate schematic for connectors
add SN field
2021-06-21 14:05:18 -06:00
Matthew Nielsen
ea91eb85bc move some vias for better ground fill 2021-06-21 13:50:16 -06:00
Matthew Nielsen
9d11afa631 Change silkscreens and legends, reroute 3.3v line for better grounding 2021-06-21 13:28:14 -06:00
Matthew Nielsen
1395b26bd8 move the regulator around so the screw hole doesn't overlap the blue pill footprint 2021-06-21 12:47:41 -06:00
Matthew Nielsen
80c3f19528 Move microsd silkscreen to match new placment, add marker on front for same 2021-06-21 11:51:26 -06:00
Matthew Nielsen
1095e39b58 Move db-25-m further up to help cable routing 2021-06-21 11:47:28 -06:00
Matthew Nielsen
a3fc0618c2 Add edge-mount db-25-m for scsi cards with fixed cables 2021-06-21 11:24:46 -06:00
Matthew Nielsen
71334603ce Move the CD card slot back by about 3mm to protect the card more 2021-06-10 12:51:35 -06:00
Matthew Nielsen
a72d8d37ca Correct LED wiring for active-low with buffer IC 2021-06-10 12:36:51 -06:00
Matthew Nielsen
06e8949635 pushing traces around to maximize ground fill 2021-06-03 14:06:53 -06:00
Matthew Nielsen
f8cc4a6e48 snug disk_act line in slightly 2021-06-03 13:54:14 -06:00
Matthew Nielsen
69098ecd46 enlarge power tracks slightly 2021-06-03 13:49:41 -06:00
Matthew Nielsen
d15bb16398 Change regulator to back side tab up 2021-06-03 13:42:24 -06:00
Matthew Nielsen
e189501817 replace lef mostfest with logic inverter 2021-06-03 13:12:07 -06:00
Matthew Nielsen
417b2efa97 move d3 a bit 2021-06-03 12:32:20 -06:00
Matthew Nielsen
8457b83bd8 pth regulator hanging off the side 2021-06-03 12:28:22 -06:00
Matthew Nielsen
fe5c55d681 Adjust screw hole in slightly to account for screw width
add silkscreen on rear for card slot
2021-05-17 10:14:26 -06:00
Matthew Nielsen
617b5176f5 Replace mounting holes with Keystone 7774 brackets 2021-05-13 20:31:07 -06:00
Matthew Nielsen
d341d89594 Added connector for external activity LED 2021-05-13 13:36:45 -06:00
Matthew Nielsen
e858144e21 Add p-mosfet driver for activity LED 2021-05-13 12:04:19 -06:00
Matthew Nielsen
09ca92ffeb Add footprint for keystone 7774 2021-05-10 14:48:55 -06:00
Matthew Nielsen
f77118804e Add another grounding track 2021-05-10 14:15:41 -06:00
Matthew Nielsen
1fbb43eede Increate termpwr track size 2021-05-10 14:11:00 -06:00
Matthew Nielsen
ee50780c25 Add fuse 2021-05-10 14:07:53 -06:00
Matthew Nielsen
46824aca0a Name change to "Blue-GS" 2021-05-04 11:50:12 -06:00
Matthew Nielsen
8afece6329 Move via so both ground planes connect 2021-05-01 12:36:44 -06:00
Matthew Nielsen
0357e0f2d1 Update silkscreens:
* Power Warning
* Nameing
* URL
2021-05-01 12:32:48 -06:00