Lattice Mapping Report File for Design Module 'top'
Design Information
Command line: map -a MachXO2 -p LCMXO2-1200HC -t TQFP100 -s 4 -oc Commercial
liron_fpgatop.ngd -o liron_fpgatop_map.ncd -pr liron_fpgatop.prf -mp
liron_fpgatop.mrp -lpf
C:/Users/chamberlin/Documents/Liron/lattice/fpgatop/liron_fpgatop.lpf -lpf
C:/Users/chamberlin/Documents/Liron/lattice/liron.lpf -c 0 -gui -msgset
C:/Users/chamberlin/Documents/Liron/lattice/promote.xml
Target Vendor: LATTICE
Target Device: LCMXO2-1200HCTQFP100
Target Performance: 4
Mapper: xo2c00, version: Diamond (64-bit) 3.9.0.99.2
Mapped on: 02/22/18 10:56:38
Design Summary
Number of registers: 43 out of 1520 (3%)
PFU registers: 43 out of 1280 (3%)
PIO registers: 0 out of 240 (0%)
Number of SLICEs: 58 out of 640 (9%)
SLICEs as Logic/ROM: 58 out of 640 (9%)
SLICEs as RAM: 0 out of 480 (0%)
SLICEs as Carry: 0 out of 640 (0%)
Number of LUT4s: 113 out of 1280 (9%)
Number used as logic LUTs: 113
Number used as distributed RAM: 0
Number used as ripple logic: 0
Number used as shift registers: 0
Number of PIO sites used: 52 + 4(JTAG) out of 80 (70%)
Number of block RAMs: 4 out of 7 (57%)
Number of GSRs: 1 out of 1 (100%)
EFB used : No
JTAG used : No
Readback used : No
Oscillator used : No
Startup used : No
POR : On
Bandgap : On
Number of Power Controller: 0 out of 1 (0%)
Number of Dynamic Bank Controller (BCINRD): 0 out of 4 (0%)
Number of Dynamic Bank Controller (BCLVDSO): 0 out of 1 (0%)
Number of DCCA: 0 out of 8 (0%)
Number of DCMA: 0 out of 2 (0%)
Number of PLLs: 0 out of 1 (0%)
Number of DQSDLLs: 0 out of 2 (0%)
Number of CLKDIVC: 0 out of 4 (0%)
Number of ECLKSYNCA: 0 out of 4 (0%)
Number of ECLKBRIDGECS: 0 out of 2 (0%)
Notes:-
1. Total number of LUT4s = (Number of logic LUT4s) + 2*(Number of
distributed RAMs) + 2*(Number of ripple logic)
2. Number of logic LUT4s does not include count of distributed RAM and
ripple logic.
Number of clocks: 2
Net fclk_c: 27 loads, 27 rising, 0 falling (Driver: PIO fclk )
Net _devsel_c: 8 loads, 0 rising, 8 falling (Driver: PIO _devsel )
Number of Clock Enables: 17
Net q7: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_1: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_2: 1 loads, 1 LSLICEs
Net myIwm/fclk_c_enable_14: 5 loads, 5 LSLICEs
Net myIwm/fclk_c_enable_4: 1 loads, 1 LSLICEs
Net myIwm/fclk_c_enable_16: 2 loads, 2 LSLICEs
Net myIwm/fclk_c_enable_20: 3 loads, 3 LSLICEs
Net myIwm/fclk_c_enable_26: 4 loads, 4 LSLICEs
Net myIwm/_devsel_N_40_enable_3: 1 loads, 1 LSLICEs
Net myIwm/fclk_c_enable_30: 3 loads, 3 LSLICEs
Net myIwm/_devsel_N_40_enable_4: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_7: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_8: 1 loads, 1 LSLICEs
Net myIwm/fclk_c_enable_27: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_5: 1 loads, 1 LSLICEs
Net myIwm/_devsel_N_40_enable_6: 1 loads, 1 LSLICEs
Net n438_c: 1 loads, 1 LSLICEs
Number of LSRs: 4
Net q7: 1 loads, 1 LSLICEs
Net myIwm/n302: 3 loads, 3 LSLICEs
Net histrobe: 1 loads, 1 LSLICEs
Net myIwm/n648: 2 loads, 2 LSLICEs
Number of nets driven by tri-state buffers: 0
Top 10 highest fanout non-clock nets:
Net q7: 22 loads
Net addr_c_0: 17 loads
Net addr_c_1: 13 loads
Net addr_c_2: 13 loads
Net addr_c_3: 13 loads
Net q6: 13 loads
Net writeBufferEmpty: 12 loads
Net myIwm/n142: 11 loads
Net myIwm/n1871: 11 loads
Net myIwm/bitTimer_3: 10 loads
Number of warnings: 0
Number of errors: 0
Design Errors/Warnings
No errors or warnings present.
IO (PIO) Attributes
+---------------------+-----------+-----------+------------+
| IO Name | Direction | Levelmode | IO |
| | | IO_TYPE | Register |
+---------------------+-----------+-----------+------------+
| data[7] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[6] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[5] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[4] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[3] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[2] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[1] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| data[0] | BIDIR | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| wrdata | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| phase[3] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| phase[2] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| phase[1] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| phase[0] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _wrreq | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _enbl1 | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _enbl2 | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| select | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _en35 | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| spi_clk | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| spi_mosi | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| spi_cs | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _en245 | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[7] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[6] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[5] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[4] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[3] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[2] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[1] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| debugInfo[0] | OUTPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[11] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[10] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[9] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[8] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[7] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[6] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[5] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[4] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[3] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[2] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[1] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| addr[0] | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| fclk | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| q3 | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| rw | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _iostrobe | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _iosel | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _devsel | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| _reset | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| sense | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| rddata | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
| spi_miso | INPUT | LVCMOS33 | |
+---------------------+-----------+-----------+------------+
Removed logic
Signal _devsel_N_40 was merged into signal _devsel_c
Signal myAddrDecoder/_iosel_N_24 was merged into signal n438_c
Signal myIwm/n1873 was merged into signal q7
Signal VCC_net undriven or does not drive anything - clipped.
Signal n1904 undriven or does not drive anything - clipped.
Block i1779 was optimized away.
Block myAddrDecoder/_iosel_I_0_1_lut was optimized away.
Block myIwm/i673_1_lut_rep_31 was optimized away.
Block i2 was optimized away.
Block m0_lut was optimized away.
Memory Usage
INFO: Design contains EBR with GSR enabled. The GSR is only applicable for
output registers except FIFO.
/myROM:
EBRs: 4
RAM SLICEs: 0
Logic SLICEs: 0
PFU Registers: 0
-Contains EBR codeROM_0_0_3_0: TYPE= DP8KC, Width_A= 2, Depth_A= 4096,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= ENABLED, MEM_INIT_FILE= rom-full-4k.mem, MEM_LPC_FILE=
codeROM.lpc
-Contains EBR codeROM_0_0_1_2: TYPE= DP8KC, Width_A= 2, Depth_A= 4096,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= ENABLED, MEM_INIT_FILE= rom-full-4k.mem, MEM_LPC_FILE=
codeROM.lpc
-Contains EBR codeROM_0_0_0_3: TYPE= DP8KC, Width_A= 2, Depth_A= 4096,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= ENABLED, MEM_INIT_FILE= rom-full-4k.mem, MEM_LPC_FILE=
codeROM.lpc
-Contains EBR codeROM_0_0_2_1: TYPE= DP8KC, Width_A= 2, Depth_A= 4096,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= ENABLED, MEM_INIT_FILE= rom-full-4k.mem, MEM_LPC_FILE=
codeROM.lpc
ASIC Components
---------------
Instance Name: myROM/codeROM_0_0_3_0
Type: DP8KC
Instance Name: myROM/codeROM_0_0_1_2
Type: DP8KC
Instance Name: myROM/codeROM_0_0_0_3
Type: DP8KC
Instance Name: myROM/codeROM_0_0_2_1
Type: DP8KC
GSR Usage
---------
GSR Component:
The Global Set Reset (GSR) resource has been used to implement a global reset
of the design. The reset signal used for GSR control is 'n440_c'.
GSR Property:
The design components with GSR property set to ENABLED will respond to global
set reset while the components with GSR property set to DISABLED will
not.
Components with disabled GSR Property
-------------------------------------
These components have the GSR property set to DISABLED. The components will
not respond to the reset signal 'n440_c' via the GSR component.
Type and number of components of the type:
Register = 17
Type and instance name of component:
Register : myIwm/rddataSync_i0
Register : myIwm/shifter_i0_i0
Register : myIwm/bitTimer__i0
Register : myIwm/rddataSync_i1
Register : myIwm/shifter_i0_i1
Register : myIwm/shifter_i0_i2
Register : myIwm/shifter_i0_i3
Register : myIwm/shifter_i0_i4
Register : myIwm/shifter_i0_i5
Register : myIwm/shifter_i0_i6
Register : myIwm/shifter_i0_i7
Register : myIwm/bitTimer__i1
Register : myIwm/bitTimer__i2
Register : myIwm/bitTimer__i3
Register : myIwm/bitTimer__i4
Register : myIwm/bitTimer__i5
Register : myAddrDecoder/romExpansionActive_16
Components with synchronous local reset also reset by asynchronous GSR
----------------------------------------------------------------------
These components have the GSR property set to ENABLED and the local reset
is synchronous. The components will respond to the synchronous local reset
and to the unrelated asynchronous reset signal 'n440_c' via the GSR
component.
Type and number of components of the type:
Register = 4
DP8KC = 4
Type and instance name of component:
Register : myIwm/_underrun_125
Register : myIwm/clearBufferTimer_i0_i3
Register : myIwm/clearBufferTimer_i0_i2
Register : myIwm/clearBufferTimer_i0_i1
DP8KC : myROM/codeROM_0_0_3_0
DP8KC : myROM/codeROM_0_0_1_2
DP8KC : myROM/codeROM_0_0_0_3
DP8KC : myROM/codeROM_0_0_2_1
EBR components with enabled GSR
-------------------------------
These EBR components have the GSR property set to ENABLED. The components
will respond to the asynchronous reset signal 'n440_c' via the GSR
component.
Type and number of components of the type:
DP8KC = 4
Type and instance name of component:
DP8KC : myROM/codeROM_0_0_3_0
DP8KC : myROM/codeROM_0_0_1_2
DP8KC : myROM/codeROM_0_0_0_3
DP8KC : myROM/codeROM_0_0_2_1
Run Time and Memory Usage
-------------------------
Total CPU Time: 0 secs
Total REAL Time: 0 secs
Peak Memory Usage: 38 MB
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp. All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved.
Copyright (c) 2001 Agere Systems All rights reserved.
Copyright (c) 2002-2017 Lattice Semiconductor Corporation, All rights
reserved.