Add more pics
This commit is contained in:
parent
6309617305
commit
b6518893be
|
@ -66,7 +66,10 @@ For futaba switches, no standoffs are required between the aligner and PCB,
|
|||
switches are seated flush on the PCB. To do this, first tack ONE pin on each
|
||||
of the four switches at the corners of the keyboard.
|
||||
|
||||
1. Now, one by one, reheat each tacked pin while pressing the corresponding switch tightly against the PCB. You should feel a small "snap" as the key seats. Remove the heat, and repeat for the pins on all four corners. Finally, solder the second pin on each of the four corner keys.
|
||||
1. Now, one by one, reheat each tacked pin while pressing the corresponding
|
||||
switch tightly against the PCB. You should feel a small "snap" as the key
|
||||
seats. Remove the heat, and repeat for the pins on all four corners. Finally,
|
||||
solder the second pin on each of the four corner keys.
|
||||
|
||||
1. Repeat the above for the spacebar and the middle key on the top row.
|
||||
|
||||
|
|
Binary file not shown.
After Width: | Height: | Size: 6.6 MiB |
Loading…
Reference in New Issue