Commit Graph

209 Commits

Author SHA1 Message Date
Dave
2889bc3777 Typo fixes to classic keycap spreadsheet 2021-11-29 16:35:23 -06:00
Dave
64d683c9e7 Move tracks in classic kbd to avoid mounting holes 2021-11-24 14:04:16 -06:00
Dave
eabace40c9 Fix name and date 2021-11-14 18:46:00 -06:00
Dave
e6af897df2 Update photo in keycap spreadsheet
- use current keycap set of keycaps instead of outside examples
2021-09-26 03:12:29 -05:00
Dave
fb44b6844a Add keyboard cutout to PCB 2021-09-21 10:27:44 -05:00
dfnr2
68c31fb078 Update README.md 2021-08-21 03:29:52 -05:00
Dave
7e0bdfb58b Clean up spreadsheet. 2021-08-08 13:29:28 -05:00
Dave
2a90669d9f Added silk screen annotations for connectors. 2021-08-08 13:20:26 -05:00
Dave
5e4c1ed078 Fix shunted diode footprints on encoder boards
The encoder boards (ATmega328P, Atmega2560, Apple2(2560) can accomodate
keyboard matrices with no diodes, by adding per-row diodes on the
encoder board.  For keyboards with per-key diodes (the typical use
case), the per-row diodes are not needed, and therefore the footprints
should be shunted by default, using a special shunted diode footprint.
When diodes are installed, the shunt can be cut with an x-acto knife.
Previous board revs had the correct footprint, but somehow the regular
diode footprint was substituted on the last release of each of these
PCBS.  The correct footprint has been restored.
2021-08-08 13:16:38 -05:00
Dave
10f1f4966e Fixed typo and slight further clarification 2021-06-19 16:45:41 -05:00
Dave
a270418407 Added some clarifications to Classic order form 2021-06-19 16:42:54 -05:00
Dave
7d78b16738 the > and < symbols were backwards wrt "." and "," 2021-06-19 16:00:30 -05:00
Dave
4b18af964a Add multiple kicad footprints
- mounting posts (for futaba)
- aligner tool
- bending guide
2021-05-19 13:34:34 -05:00
dfnr2
1bcf10ae29 Update README.md
Fixed position of image
2021-02-13 07:42:24 -06:00
Dave
db861b6a32 Updated README.md with image of PCB 2021-02-13 07:41:14 -06:00
Dave
4fadd82a5c Added a keyboard adapter between Sol-20, Apple 1, Apple 2 2021-02-13 07:34:14 -06:00
Dave
fe4e12e86a Add + symbol to bottom silk of LEDs on the keyboards 2021-02-02 15:02:21 -06:00
Dave
8ad2025d0f Sol-20 spacebar stabilizer fix and other cleanups
- Replaced standard MX footprint with spacebar footprint, including stabilizers
- Fixed courtyard on MX footprints in library to avoid collisions
- Added a DIP switch variant with header position closer to pin 1
- moved option DIP switch/header to align header better with edge of PCB.
2021-02-01 14:39:57 -06:00
Dave
577f9d73ac pcb file consistency update 2021-01-24 13:07:10 -06:00
dfnr2
ebfee14c7a Update README.md 2021-01-15 22:49:34 -06:00
Dave
b77c69e042 Minor README tweaks for Sol keyboards 2021-01-01 00:39:03 -06:00
Dave
b32a69d1c4 tweaked Sol-20 README.md files
Clean up links between integrated and non-integrated versions
2021-01-01 00:36:01 -06:00
Dave
9a5fd4385b Fix markdown bug in link to integrated keyboard 2021-01-01 00:32:45 -06:00
Dave
d1b61d301a Update README for Sol keyboard to reference integrated keyboard 2021-01-01 00:29:59 -06:00
Dave
4469f46e05 Update README for integrated sol keyboard pcb
Add images including rendering of integrated PCB
2020-12-31 23:58:52 -06:00
Dave
a57f4cec0f Add Sol-20 keyboard with integrated encoder 2020-12-31 23:51:19 -06:00
Dave
933c658f7c Merged MX key footprint from newsol branch (narrower courtyard) 2020-12-31 23:39:44 -06:00
Dave
fd127dd4b0 Add SMD diodes and resistors to SOL keyboard 2020-12-29 20:15:23 -06:00
Dave
5b84fe914c Update interface-ascii to use either DIP switch or header-jumper 2020-12-29 18:26:07 -06:00
Dave
5f27567db3 Modify to use DIP switch or jumpers
- Add combined DIP-switch/Jumper footprint to footprint library
- Fix Apple2-encoder and interface-ascii-atmega2560 schematics and PCB to use
new footprint.
2020-12-29 17:11:50 -06:00
Dave
118999f085 Fix LED orientation 2020-09-22 03:22:10 -05:00
Dave
74c86a8a4e Added "HERE IS" and 1.5u TAB key to classic design 2020-09-22 03:05:48 -05:00
Dave
0daaad33f7 Fixed LED orientation on PCB
- CapsLock, Line Feed LEDs and D33 were wired correctly, but oriented backwards
on PCB relative to Power and OSI ShiftLock LEDs.  Fixed so Cathode is always on
the right.

- Marked Anode for all LEDs with (+) symbol.
2020-09-22 02:47:34 -05:00
Dave
4a3403abb1 Removed old keyboard cutout templates for classic keyboard.
cutouts are now included in the classic keyboard PCB file on separate layers.
2020-08-21 21:38:35 -05:00
Dave
efc4c7b5ab Removed vestigial R4 resistor and moved R3 to be on RX line.
Now, R3 only needs to be installed when using the serial port.  A zero-ohm
jumper can be used for serial-only output.
2020-08-18 15:32:53 -05:00
Dave
973602856f Include futaba pad/aligner shifts in futaba aligner 2020-08-17 16:13:26 -05:00
Dave
ed5f3fc8d6 Moved Cherry MX and futaba pads farther apart in combined footprint
- Offset cherry MX pads and aligners downward 0.004" from origin

- Offset futaba pads and aligners upward -0.004" from origin

- Update footprints in classic and sol-20 pcbs and aligners

- adjust mounting slots in Sol-20 aligners to match futaba or cherry offset
2020-08-17 15:21:06 -05:00
Dave
3e34defe4c Update Sol-20 keyboard to use fixed footprints
- Update all footprints on sol-20 keyboard and aligners

- Add soldermask clearance around cherry MX posts

- Move Cherry MX pads down 1 mil, and Futaba pads up 2 mils

- Adjust Cherry aligner footprints down 1 mil

- Adjust Futaba aligner footprints up 2 mils

- Move mounting slots up 1 mil on Cherry aligner

- Move mounting slots down 1 mil on Futaba aligner

- incorporate improved stabilizer post adapters in futaba aligner

- add slots for stabilizer posts in futaba aligner and Sol kebyoard PCB

- Move stabilizer bar bend guide to left bottom edge to facilitate bending

- Bump rev to 1.6
2020-08-16 22:47:26 -05:00
Dave
1f529d3a52 Update footprints to add soldermask clearance around Cherry MX posts 2020-08-16 22:46:32 -05:00
Dave
e6fd98c9bd Remove separated main and numpad aligners for SOL keyboard
Not needed.
2020-08-16 22:45:26 -05:00
Dave
9c89c2c412 Add 3 mil clearance around Cherry MX alignment posts 2020-08-16 22:44:33 -05:00
Dave
f25395c6ef For ASCII interfaces, use common/unikbd.lib instead of directory-local libs 2020-08-13 15:50:49 -05:00
Dave
8812de0d67 Apply fixes to cherry aligner. 2020-08-06 15:28:16 -05:00
Dave
15d8fccc21 Update components in SMT encoder board to include LCSC part numbers 2020-08-06 15:27:39 -05:00
Dave
c13672b408 Multiple fixes for keyboard PCB
- in combined CherryMX/futaba footprints, moved cherry pads down 1 mil and
futaba pads up 2 mil, to reduce risk of shortin of LED pads with futaba pad.
Adjusted all aligners accordingly

- Fixed centroid for combined diode footprint and adjusted PCB placement on
classic and SOL keyboards accordingly.

- Moved SMT pads in combined diode footprint to top layer, so pick & place file
will be usable.

- changes to futaba stabilizer design.  Longer post adapter passes through slots
in keyboard and aligner.

- Changed futaba post thickness gauge from board outline to a slot to improve
tolerance.

- Moved spacebar stabilizer bending guide to edge of PCB, in order to make it
more useful in bending PCBs.

- Changed Apple II mounting slots on classic keyboard from horizontal to
vertical orientation, to accommodate the different spacing offets due to the use
of spacers in angled mounting threads.
2020-08-01 01:15:23 -05:00
Dave
3710f1c2b4 Update assembly rendering for apple2 encoder 2020-07-23 02:56:26 -05:00
Dave
5d1055cc3f Remove unneeded pullups from Atmega2560 smt encoder 2020-07-23 02:53:43 -05:00
Dave
7e2401483c Apply 328P readme update to main branch. 2020-07-16 21:12:49 -05:00
Dave
1caf622ba5 Fix bad image link 2020-07-13 16:50:19 -05:00
Dave
9eafbe8e4d Reduce size of switch solder image 2020-07-13 16:45:23 -05:00