- Offset cherry MX pads and aligners downward 0.004" from origin
- Offset futaba pads and aligners upward -0.004" from origin
- Update footprints in classic and sol-20 pcbs and aligners
- adjust mounting slots in Sol-20 aligners to match futaba or cherry offset
- in combined CherryMX/futaba footprints, moved cherry pads down 1 mil and
futaba pads up 2 mil, to reduce risk of shortin of LED pads with futaba pad.
Adjusted all aligners accordingly
- Fixed centroid for combined diode footprint and adjusted PCB placement on
classic and SOL keyboards accordingly.
- Moved SMT pads in combined diode footprint to top layer, so pick & place file
will be usable.
- changes to futaba stabilizer design. Longer post adapter passes through slots
in keyboard and aligner.
- Changed futaba post thickness gauge from board outline to a slot to improve
tolerance.
- Moved spacebar stabilizer bending guide to edge of PCB, in order to make it
more useful in bending PCBs.
- Changed Apple II mounting slots on classic keyboard from horizontal to
vertical orientation, to accommodate the different spacing offets due to the use
of spacers in angled mounting threads.
- Slightly narrower posts.
- slightly smaller hole, closer to end
- added mouse bites for breakaway to avoid protruding breakaway
- Applied to Sol and Classic
- Moved header slightly forward
- Moved interface mount holes do reduce interference with case mount holes
- For all keys in classic keyboard, add option for either through-hole or SMT
diodes and resistors.
- Adjust upper right corner circular cutout for AppleII+ case fit.
- Adjust OSI mounting hole pattern for improved fit.
- Changed OSI mount holes along top of keyboard to slots, to fit both C2P (542
keyboard) and C4P (542 Rev B/c keyboards).
- PCB and aligners must be slightly taller to accommodate the slots along the
top row
- remove material from PCB to allow keyboard to fit in Apple II case
- enlarge center hole on cherry MX footprints slightly, to 0.160" to allow
slightly more tolerance, which eases assembly.
- include holes for LEDs on futaba aligner
- include extra pads on main PCB for LEDs with futaba keys
- Add LED on LINE FEED which maps to REPEAT/CAPSLOCK on Apple II keymap
- This allows the PCB to sink below the mounting brackets. The aligner height can
be adjusted relative to the mounting brackets using spacers.
- changed futaba aligners to use cherry stabilizers.
- bumped rev number
- Add extra key to the left side of row 4 to permit "inverted T" for those who
want it.
- Tiny shifts of several keys to correct key distances
- Include mounting holes with daughter board connector, to ensure consistency.
- Add apple 2 mounting slots (and stretch PCB to accommodate slots
- Add pass-through holes in aligners for OSI keyboard spacers
- Move 'ESC' key next to '1' key
- Add TAB key next to Q key
- remove 'here is' and finalize "helper" keys along left side of keyboard
- move legends off of PCB traces
- update to release 1.3
- Add OSI-compatible mounting holes.
- Adjust keyboard and aligner holes to make room for the OSI mounting holes
- Change "Universal Keyboard" to "Unified Keyboard" in the design files.
