Apple-2-HW/unified_retro_keyboard
1
0
Fork 0
mirror of https://github.com/osiweb/unified_retro_keyboard.git synced 2024-11-25 09:31:11 +00:00
Code Issues Projects Releases Wiki Activity
fb28dd34fc
unified_retro_keyboard/hardware/interface-osi
History
Dave ac19a16902 Add OSI interface PCB to repo
2020-06-16 13:14:51 -05:00
..
images Add README.md to OSI interface 2020-05-27 13:10:28 -05:00
addon.kicad_pcb Update addon board updates 2020-05-27 19:23:34 -05:00
addon.pro Adjustments for OSI RESET and shiftlock circuits 2020-05-21 13:48:38 -05:00
addon.sch Update addon board updates 2020-05-27 19:23:34 -05:00
interface-osi.kicad_pcb Add OSI interface PCB to repo 2020-06-16 13:14:51 -05:00
interface-osi.pro Add OSI interface schematic 2020-04-21 14:30:59 -05:00
interface-osi.sch Completed routing on OSI interface board 2020-05-27 12:22:58 -05:00
README.md Update readme for clarity 2020-05-27 13:12:54 -05:00
Sound.sch Completed routing on OSI interface board 2020-05-27 12:22:58 -05:00
special_keys.sch Completed routing on OSI interface board 2020-05-27 12:22:58 -05:00

README.md

  • OSI Compatible interface

An interface for OSI computers that is compatible with the OSI 542C keyboard, including sound circuits.

This interface also permits substitution of a soft-shiftlock function using a regular momentary keyswitch, instead of the hard-to-fine latchine keyswitch. An LED is provided to indicate SHIFT LOCK status. This interface mates with the Classic ASCII keyboard, configured with the OSI keycaps.

Assembly Rendering

**Construction Notes:

  1. If a diode per key is installed on the keyboard, then omit diodes D1-D8 and install D18.

  2. If the keyboard is not installed with a diode per key, then install D1-D8, and omit D18.

  3. The RESET delay is about 3 seconds with a 6.8 uF capacitor at C20. 4.7 uF gives about 2 seconds, and 3.3 uF gives about a 1 second delay.

  4. If you want to use the sound circuit with an older 540A video board, then on the 540A board, jumper pin 13 of IC E4 to pin 15 of the keyboard connector, and on the OSI interface board, set JP1 to "S1".

  5. If you use a 540B video board, then set JP1 to "/S1"