From 7bc7872e74b23819a118bea1490d26b5eda2fa19 Mon Sep 17 00:00:00 2001 From: Dave Date: Fri, 29 Jul 2022 00:09:47 -0500 Subject: [PATCH] Clarification of when to tightnet nuts --- apple-ii-notes/apple-ii-notes.md | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/apple-ii-notes/apple-ii-notes.md b/apple-ii-notes/apple-ii-notes.md index d391278..3562c96 100644 --- a/apple-ii-notes/apple-ii-notes.md +++ b/apple-ii-notes/apple-ii-notes.md @@ -91,7 +91,7 @@ the torsion-box structure, along with the soldered-in keyswitches. 4. Secure the screws by installing lockwashers and hex nuts on the back of the PCB. Lightly finger-tighten the nuts just enough to stabilize the assembly, while allowing adjustment of the alignment if needed when installing - switches. + switches in the next step. [[images/aligner-assembly-complete.jpg]] @@ -108,9 +108,10 @@ the torsion-box structure, along with the soldered-in keyswitches. [[images/keys-boundaries.jpg]] -2. It may be necessary to adjust the alignment of the main PCB and aligner to - ensure the keys snap in place smoothly. At this point, tighten the hext nuts - with sufficient torque to flatten and fully engage the lockwashers. +2. It may be necessary to slightly adjust the alignment of the main PCB and + aligner to ensure the keys snap in place smoothly. Once these keys have been + installed, tighten the hext nuts with sufficient torque to flatten and fully + engage the lockwashers. 3. Install the rest of the keys, filling in the rows between the "boundary" keys.