Add note about fuse settings.
parent
34509eefcf
commit
b3c668625f
24
Home.md
24
Home.md
|
@ -6,4 +6,26 @@ This wiki will collect technical notes, assembly and configuration guides, tips
|
|||
|
||||
[Classic Keyboard build guide](classic-keyboard-build)
|
||||
|
||||
[Apple II notes] (apple-ii-mount)
|
||||
[Apple II notes] (apple-ii-mount)
|
||||
|
||||
<details>
|
||||
<summary>Programming the Atmega chips</summary>
|
||||
The fuse settings I recommend are:
|
||||
|
||||
Extended: 0xFF
|
||||
High: 0xD9
|
||||
Low: 0xD2
|
||||
|
||||
This corresponds to the following fuse settings
|
||||
|
||||
For ATMega328P:
|
||||
- Brownout Detection Disabled (Extended byte)
|
||||
- SPIEN (in system programming over SPI) Enabled (High byte)
|
||||
- Boot flash size 2048 ((high byte)
|
||||
- 8 MHz internal RC clock, 4.1 ms startup time (low byte)
|
||||
All other fuses disabled.
|
||||
|
||||
For ATMega2560: (to do)
|
||||
|
||||
Specifically, you want to make sure that the DIV8 flag is OFF (or the chip will run at 1 MHz and you will find the encoder to be very sluggish), and the ISP programming flag is enabled (if you want to be able to program via the ISP header)
|
||||
</details>
|
||||
|
|
Loading…
Reference in New Issue