A2osX/BIN/EDIT.S.txt

NEW
PREFIX /A2OSX.BUILD
AUTO 4,1
				.LIST OFF
				.OP	65C02
				.OR	$2000
				.TF /A2OSX.BUILD/BIN/EDIT
*--------------------------------------
				.INB /A2OSX.BUILD/INC/MACROS.I
				.INB /A2OSX.BUILD/INC/A2OSX.I
*--------------------------------------
ZPPTR1			.EQ ZPBIN
ZPPTR2			.EQ ZPBIN+2
BufPtr			.EQ ZPBIN+4
BufPtrBackup	.EQ ZPBIN+6
ClipboardPtr	.EQ ZPBIN+8
*--------------------------------------
PromptBufferMax	.EQ 64
PromptModeHelp	.EQ 2
PromptModeFind	.EQ 4
PromptModeReplace	.EQ 6
PromptModeSave	.EQ 8
*--------------------------------------
*			File Header (16 Bytes)
*--------------------------------------
CS.START		cld
				jmp (.1,x)
				.DA #$61				6502,Level 1 (65c02)
				.DA #1					BIN Layout Version 1
				.DA 0
				.DA CS.END-CS.START		CS
				.DA DS.END-DS.START		DS
				.DA #16					SS
				.DA #10					ZP
				.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------				
.1				.DA CS.INIT
				.DA CS.RUN
				.DA CS.DOEVENT		
				.DA	CS.QUIT
L.SEQ.DETECT	.DA SEQ.DETECT
L.SEQ.INIT		.DA SEQ.INIT
L.SEQ.RESET		.DA SEQ.RESET
L.SEQ.SCROLLUP	.DA SEQ.SCROLLUP
L.SEQ.SCROLLDN	.DA SEQ.SCROLLDN
L.SEQ.INV		.DA SEQ.INV
L.SEQ.NORM		.DA SEQ.NORM
L.SEQ.CEOL		.DA SEQ.CEOL
L.MSG.TOPBAR	.DA MSG.TOPBAR
L.MSG.STATUSBAR	.DA MSG.STATUSBAR
L.MSG.STATUSBAR.H	.DA MSG.STATUSBAR.H
L.MSG.STATUSBAR.F	.DA MSG.STATUSBAR.F
L.MSG.STATUSBAR.R	.DA MSG.STATUSBAR.R
L.MSG.STATUSBAR.S	.DA MSG.STATUSBAR.S
L.MSG.STATUSBAR.E	.DA MSG.STATUSBAR.E
L.MSG.NEWFILE	.DA MSG.NEWFILE
L.MSG.GOTOXY	.DA MSG.GOTOXY
L.MSG.HELPLINE	.DA MSG.HELPLINE
L.MSG.HELP		.DA MSG.HELP
J.PROMPT		.DA Prompt.Editor
				.DA Prompt.Help
				.DA Prompt.Find
				.DA Prompt.Replace
				.DA Prompt.Save
J.CTRL			.DA Ctrl.Invalid
				.DA Ctrl.A
				.DA Ctrl.B
				.DA Ctrl.C
				.DA Ctrl.D
				.DA Ctrl.E
				.DA Ctrl.F
				.DA Ctrl.G
				.DA Ctrl.BS
				.DA Ctrl.TAB
				.DA Ctrl.LF
				.DA Ctrl.VT
				.DA Ctrl.L
				.DA Ctrl.CR
				.DA Ctrl.N
				.DA Ctrl.O
				.DA Ctrl.P
				.DA Ctrl.Q
				.DA Ctrl.R
				.DA Ctrl.S
				.DA Ctrl.T
				.DA Ctrl.FS
				.DA Ctrl.V
				.DA Ctrl.W
				.DA Ctrl.X
				.DA Ctrl.Y
				.DA Ctrl.Z
				.DA Ctrl.ESC
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA Ctrl.Invalid
				.DA 0
*--------------------------------------
CS.INIT			lda #$ff
				>STA.G bSaved

				ldy #S.PS.ARGC
				lda (pPs),y
				beq .1					No arg, new file....
				
				lda #1
				>SYSCALL GetArg
				
				>SYSCALL RealPath
				txa
				ldy #hFileName
				sta (pData),y
				
				jsr LoadFile
				bcc .8					if CS, Failed to load file, keep name, but new file....
				
.1				>LDYAI 1				buffer size = 0 (+ 1 for ending 0)
				>SYSCALL GetMem0
				bcs .9
				
				txa
				ldy #hBuffer			FileLen already set to 0
				sta (pData),y
				
.8				lda (pPs)
				ora #S.PS.F.EVENT		Now accept events
				sta (pPs)
				clc
.9				rts
*--------------------------------------
CS.RUN			>LDYA L.SEQ.DETECT
				>SYSCALL printf		Send Query for term W & H
				bcs .9
				
.1				>SLEEP
				>SYSCALL GetChar
				bcs .1
				
				jsr CharIn
				
				ldy #ScreenW			Wait for Response from terminal
				lda (pData),y			for W & H
				beq .1
				
				jsr SCRN.Init
				bcs .9
				
.2				ldy #bCancel
				lda (pData),y
				bne .99
	
				>SLEEP
				>SYSCALL GetChar
				
				bcs .2
				
				jsr CharIn
				bra .2
				
.99				lda #0
.9				sec				
				rts
*--------------------------------------
CS.DOEVENT		sec
				rts
*--------------------------------------
CS.QUIT			ldy #hBuffer
				lda (pData),y
				beq .1
				>SYSCALL FreeMem
				
.1				ldy #hBufferBackup
				lda (pData),y
				beq .2
				>SYSCALL FreeMem
				
.2				ldy #hClipBoard
				lda (pData),y
				beq .3
				>SYSCALL FreeMem

.3				ldy #hFileName
				lda (pData),y
				beq .8
				>SYSCALL FreeMem

.8				>LDYA L.SEQ.RESET
				>SYSCALL printf
.9				rts
*--------------------------------------
CharIn			tax

				ldy #bEscMode
				lda (pData),y
				asl
				txa
				bcc .1					Not in ESC mode
				
				cmp #'['
				beq .8

				ldy #EscBuffer
				lda (pData),y
				inc
				sta (pData),y
				
				clc
				adc #EscBuffer
				tay
				txa
				sta (pData),y
				
				cmp #64

				bcc .8
				jsr CharIn.Esc
				bcs .8					Not translated, exit
				
.1				cmp #27					Esc ?
				bne .2

				ldy #bEscMode
				lda #$ff
				sta (pData),y
				inc
				ldy #EscBuffer
				sta (pData),y

.8				clc
				rts
				
.2				pha
				ldy #PromptMode
				lda (pData),y
				tax
				pla
				jmp (J.PROMPT,x)
*--------------------------------------
CharIn.Esc		ldy #bEscMode
				lda #0
				sta (pData),y
				
				ldy #EscBuffer
				lda (pData),y
				clc
				adc #EscBuffer
				tay
				
				lda (pData),y
				
				ldx EscChars
				
.1				cmp EscChars,x

				beq .2
				dex
				bne .1
				
				cmp #'R'				Response to cursor position query?
				beq .3
				
				sec
				rts
				
.2				lda EscAscii,x
				clc
				rts
				
.3				stz TmpByte
				
				ldy #EscBuffer+1
				
.4				lda (pData),y
				cmp #';'
				beq .5
				
				and #$0f
				pha
				lda TmpByte
				asl
				asl
				clc
				adc TmpByte
				asl
				sta TmpByte
				pla
				clc
				adc TmpByte
				sta TmpByte
				iny
				bra .4
				
.5				phy

				lda TmpByte
				ldy #ScreenH
				sta (pData),y
				dec						Remove 2 (top & status bar) for viewportH
				dec
				ldy #ViewPortH
				sta (pData),y
				dec
				ldy #ViewPortHm1		Remove 1 more to store offsert to last line of viewport
				sta (pData),y
				
				ply
				
				stz TmpByte
				
				iny
				
.6				lda (pData),y
				cmp #'R'
				beq .7
				
				and #$0f
				pha
				lda TmpByte
				asl
				asl
				clc
				adc TmpByte
				asl
				sta TmpByte
				pla
				clc
				adc TmpByte
				sta TmpByte
				iny
				bra .6
				
.7				lda TmpByte
				ldy #ScreenW
				sta (pData),y
				
				sec
				rts
*--------------------------------------
LoadFile		>PUSHWI 0				Aux type
				>PUSHBI 4				S.FI.T.TXT
				>PUSHBI	SYS.FOpen.R
				ldy #hFileName
				lda (pData),y
				
				>SYSCALL GetMemPtr
				
				>PUSHYA
				>SYSCALL LoadFile
				bcs .9
				
				stx hMem
				>STYA TmpLen
				iny
				bne .2
				inc						+1 for ending zero
				
.2				>SYSCALL GetMem0
				bcs .98
				
				>STYA ZPPTR2
				txa
				ldy #hBuffer
				sta (pData),y
				
				lda hMem
				
				>SYSCALL GetMemPtr
				>STYA ZPPTR1
				
				lda TmpLen
				eor #$ff
				tax
				lda TmpLen+1
				eor #$ff
				pha
				ldy #0
				
.5				inx
				bne .6
				pla
				inc
				beq .7
				pha
				
.6				lda (ZPPTR1),y
				sta (ZPPTR2),y
				iny
				bne .5
				inc ZPPTR1+1
				inc ZPPTR2+1
				bra .5
				
.7				ldy #FileLen
				lda TmpLen
				sta (pData),y
				iny
				lda TmpLen+1
				sta (pData),y
				
				jsr .98
				clc
				rts
				
.98				pha
				lda hMem
				>SYSCALL FreeMem
				pla				
				sec
.9				rts				
*--------------------------------------
SaveFile		>PUSHWI 0				Aux type
				>PUSHBI 4				S.FI.T.TXT
				>PUSHBI	SYS.FOpen.X+SYS.FOpen.W
				>LDA.G hFileName
				>SYSCALL GetMemPtr
				>PUSHYA
				>SYSCALL FOpen
				bcs .9
				
				pha
				
				>LDA.G hBuffer
				>SYSCALL GetMemPtr
				>PUSHYA
				
				>PUSHW.G FileLen
				
				pla
				pha
				>PUSHA				
				>SYSCALL FWrite
				bcc .1

				tax
				pla
				phx
				>SYSCALL FClose
				pla
				sec
				rts
				
.1				pla
				>SYSCALL FClose				
				
.9				rts
*--------------------------------------
DecTmpCount		lda TmpCount
				bne .1
				lda TmpCount+1
				beq .9
				dec TmpCount+1
.1				dec TmpCount
				ora #$ff				make sure NZ
.9				rts				
*--------------------------------------
				.INB /A2OSX.SRC/BIN/EDIT.S.BUF
				.INB /A2OSX.SRC/BIN/EDIT.S.CTRL
				.INB /A2OSX.SRC/BIN/EDIT.S.SCRN
*--------------------------------------
CS.END
SEQ.DETECT		.AZ "Querying terminal capabilities...\e[999;999H\e[6n"
SEQ.INIT		.AZ "\ec\e[2;%dr"		\e[?6h
SEQ.RESET		.AZ "\ec"
SEQ.SCROLLUP	.AZ "\e[%d;%dH\eD"
SEQ.SCROLLDN	.AZ "\e[%d;%dH\eM"
SEQ.INV			.AZ "\e[7m"
SEQ.NORM		.AZ "\e[0m"
SEQ.CEOL		.AZ "\e[K"
MSG.TOPBAR		.AZ "\e[1;1HA2osX Edit:%s\e[0m"
MSG.STATUSBAR	.AZ "Press Ctrl-A For Help      Length:%5D,Col:%3d,Line:%5D"
MSG.STATUSBAR.H	.AZ "Press any key to exit this screen:\e[0m"
MSG.STATUSBAR.F	.AZ "Find:%s\e[0m"
MSG.STATUSBAR.R	.AZ "Replace:%s\e[0m"
MSG.STATUSBAR.S	.AZ "Save:%s\e[0m"
MSG.STATUSBAR.E	.AZ "Error:%h\e[0m"
MSG.GOTOXY		.AZ "\e[%d;%dH"
MSG.HELPLINE	.AZ "%S\e[K"
MSG.HELP		>PSTR "All commands: (* = Not yet implemented)"
				>PSTR "------------"
				>PSTR "  Ctrl-A : This help screen"
				>PSTR "  Ctrl-B : Mark beginning of selection"
				>PSTR "  Ctrl-C : Copy selection to clipboard"
				>PSTR "  Ctrl-D : Delete selection"
				>PSTR "  Ctrl-E : Mark end of selection"
				>PSTR "  Ctrl-F : * Find a string..."
				>PSTR "  Ctrl-G : Go to start of current line"
				>PSTR "  Ctrl-L : Go to end of current line"
				>PSTR "  Ctrl-N : * Find next"
				>PSTR "  Ctrl-O : Page up"
				>PSTR "  Ctrl-P : Page down"
				>PSTR "  Ctrl-Q : Quit"
				>PSTR "  Ctrl-R : * Replace found string with..."
				>PSTR "  Ctrl-S : Save file to disk..."
				>PSTR "  Ctrl-T : Go to top of file"
				>PSTR "  Ctrl-V : Past clipboard at cursor position"
				>PSTR "  Ctrl-W : Erase current line"
				>PSTR "  Ctrl-X : Cut block to clipboard"
				>PSTR "  Ctrl-Y : Go to end of file"
				>PSTR "  Ctrl-Z : * Undo previous change"
				.HS 00
*--------------------------------------
MSG.NEWFILE		>PSTR "(new file)"
EscChars		>PSTR "DBAC"
EscAscii		.HS 04080A0B15
hMem			.BS 1
TmpFilename		.BS 1
TmpByte			.BS 1
TmpLen			.BS 2
TmpCount		.BS 2
TmpIndex		.BS 2
SelLen			.BS 2
BUF.LOffset		.BS 2
BUF.COffset		.BS 2
BUF.TmpLine1	.BS 2
BUF.TmpLine2	.BS 2
bNotRepaint		.BS 1
bSelected		.BS	1
*--------------------------------------
				.DUMMY
				.OR 0
DS.START
PromptBuffer	.BS PromptBufferMax+1
PromptMode		.BS 1
bCancel			.BS 1
bSaved			.BS 1
bEscMode		.BS 1
EscBuffer		.BS 16
hFileName		.BS 1
hFind			.BS 1
hReplace		.BS 1
hBuffer			.BS 1
hBufferBackup	.BS 1
FileLen			.BS 2
hClipBoard		.BS 1
ClipBoardLen	.BS 2
ScreenW			.BS 1
ScreenH			.BS 1
ViewPortH		.BS 1
ViewPortHm1		.BS 1
ScreenX			.BS 1
ScreenY			.BS 2
CurX			.BS 1
CurY			.BS 1
FileX			.BS 1
FileY			.BS 2
SelStart		.BS 2
SelEnd			.BS 2
DS.END
				.ED
*--------------------------------------
MAN
SAVE /A2OSX.SRC/BIN/EDIT.S
ASM