A2osX/SYS/KERNEL.S.INIT.txt

PR#3
PREFIX /A2OSX.BUILD
LOMEM $A00
INC 1
AUTO 6
*--------------------------------------
Kernel.Init		sei
 				ldx	#$FF
				txs
				sta SETALTZP

				stx A2osX.SaveSM
				stx A2osX.SaveSX

				sta CLRALTZP			Make sure MAIN ZP is enabled for X.PRINT.F
*--------------------------------------
Kernel.Init2	>LDAXI MSG.Init2
				jsr PrintFAX
				
				>LDYAI A2osX.GP
				>STYA ZPPtr1
				>LDYAI A2osX.SYSCALL
				>STYA ZPPtr2
				>LDYAI A2osX.D1-A2osX.GP^$FFFF
				>STYA ZPPtr3
				jsr Kernel.Move
				
				sta CLRALTZP
				
				>LDAXI MSG.D2
				jsr PrintFAX
				
				sta SETALTZP
				bit RRAMWRAMBNK2
				bit RRAMWRAMBNK2

				>LDYAI A2osX.D2
				>STYA ZPPtr1
				>LDYAI $D000
				>STYA ZPPtr2
				>LDYAI A2osX.E0-A2osX.D2^$FFFF
				>STYA ZPPtr3
				jsr Kernel.Move
				
				sta CLRALTZP
				
				>LDAXI MSG.D1
				jsr PrintFAX
				
				sta SETALTZP
				bit RRAMWRAMBNK1
				bit RRAMWRAMBNK1

				>LDYAI A2osX.D1
				>STYA ZPPtr1
				>LDYAI $D000
				>STYA ZPPtr2
				>LDYAI A2osX.D2-A2osX.D1^$FFFF
				>STYA ZPPtr3
				jsr Kernel.Move
				
				sta CLRALTZP
				
				>LDAXI MSG.E0
				jsr PrintFAX
				
				sta SETALTZP
				bit RRAMWRAMBNK1
				bit RRAMWRAMBNK1

				>LDYAI A2osX.E0
				>STYA ZPPtr1
				>LDYAI $E000
				>STYA ZPPtr2
				>LDYAI A2osX.E0.E-A2osX.E0^$FFFF
				>STYA ZPPtr3
				jsr Kernel.Move

				sta CLRALTZP			Make MAIN ZP is enabled for X.PRINT.F
				
				cli

				jsr KConfigLoad
				
				lda A2osX.HZ
				pha						push HZ
				>LDAXI MSG.HZ
				jsr PrintFAX
				
				jsr CPU.Init
				
				>LDAXI MSG.Init2.OK
				jsr PrintFAX
*--------------------------------------
				>DEBUGOA
*--------------------------------------
Kernel.Init3	sta SETALTZP
				bit RRAMWRAMBNK1
				bit RRAMWRAMBNK1

				jsr MemMgrInit
				jsr PS0Init
				bcs * 
				>LDYAI MSG.Init3
				>SYSCALL PrintF.YA
				
				jsr DevMgrInit
				bcs *

				jsr IrqMgrInit
				bcs *

				jsr EvtMgrInit
				bcs *

				jsr FltMgrInit
				bcs *

				jsr TskMgrInit
				bcs *

				ldy #S.PS.hPREFIX
				lda (pPs),y
				>SYSCALL GetMemPtr.A
				 
				>PUSHYA
				>LDYAI MSG.Prefix
				>SYSCALL PrintF.YA

				>PUSHWI STARTUP.CMDLINE
				>LDYAI MSG.Startup
				>SYSCALL PrintF.YA

				>LDYAI STARTUP.CMDLINE
				>SYSCALL ExpandStr.YA
				phx						Save Expanded CMDLINE for discard

				>SYSCALL CreateProcessYA
				
				bcs .9
				pla
				>SYSCALL FreeMem.A		...discard...
				
				>LDYAI MSG.Init3.OK
				>SYSCALL PrintF.YA
				
				>DEBUGOA

				jmp CORE.Run
				
.9				>PUSHA
				>LDYAI MSG.StartupErr
				>SYSCALL PrintF.YA
				bra *					No need to discard Expanded CMDLINE 
*--------------------------------------
Kernel.Move		ldy #0
.1				inc ZPPtr3
				bne .2
				inc ZPPtr3+1
				beq .9
			
.2				lda (ZPPtr1),y
				sta (ZPPtr2),y
				iny
				bne .1
				
				inc ZPPtr1+1
				inc ZPPtr2+1
				bne .1
.9				rts				
*--------------------------------------
CPU.Init		>LDAXI MSG.CPU
				jsr PrintFAX
				
				jsr Detect6502			A = CPU type
				sta A2osX.CPUTYPE
				ldx MSG.CPUTYPEH,y
				lda MSG.CPUTYPEL,y
				jsr PrintFAX

				lda MACHID
				and #MACHID.TYPE
				cmp #MACHID.TYPE.IIc
				beq CPU.Init.Z80
				
				>LDAXI MSG.CPU.SPEED
				jsr PrintFAX

				stz A2osX.RANDOM16
				stz A2osX.RANDOM16+1
				
				php
				sei
				
.1				bit VBL
				bpl .2

.2				bit VBL
				bmi .2

				ldx #0					Count LO
				lda #0					Count HI
				
.3				ldy #3					(2)
				
.4				nop						(2)
				dey						(2)
				bne .4					(2*)
				
				inc A2osX.RANDOM16		(6)
				bne .5					(2*)
				
				inc A2osX.RANDOM16+1	(6)
				bit VBL					(4)
				bpl .3					(2*)
				bmi .6
				
.5				nop						(2)
				nop						(2)
				nop						(2)
				bit VBL					(4)
				bpl .3					(2*)
				
.6				plp

				stz A2osX.CPUSPEED
				
.7				sec
				lda A2osX.RANDOM16
				sbc #100
				tax
				lda A2osX.RANDOM16+1
				sbc /100
				bcc .8
				
				stx A2osX.RANDOM16
				sta A2osX.RANDOM16+1
				inc A2osX.CPUSPEED
				bra .7

.8				lda A2osX.RANDOM16
				sta A2osX.CPUSPEED+1
				pha						push CPU speed LO
				lda A2osX.CPUSPEED
				pha						push CPU speed HI
				>LDAXI MSG.CPU.SPEEDOK
				jsr PrintFAX

CPU.Init.Z80	>LDAXI MSG.Z80
				jsr PrintFAX
				jsr DetectZ80
				bcs .9
				sta A2osX.Z80SLOT
				pha 					Push  Z80Slot
				
				tax
				lda #A2osX.SLOTS.Z80
				sta A2osX.SLOTS,x
				
				>LDAXI MSG.Z80.OK
				jsr PrintFAX
				rts
				
.9				>LDAXI MSG.Z80.KO
				jsr PrintFAX
				rts
*--------------------------------------
* Out:
*  A = $60, 6502
*  A = $61, 65C02
*  A = $62, 65R02
*  A = $63, 65816
*--------------------------------------
Detect6502		ldy #0					Test 6502 BCD bug
				sed
				lda #$99
				clc
				adc #$01
				cld
				bmi .9					BUG!, we have 6502

				ldy #3					test 65C816 TYX Instruction
				ldx #0
				.OP 65816
				tyx						TYX: if 65C816, x becomes non-zero
				.OP 65C02
				bne .9					worked! 65C816

				dey						y=2 -> R65C02
				ldx $EA					save zp $EA
				stz $EA					store 0 in $EA
*				.OP 65R02
				.HS F7EA				For compatibility with A2osX.ASM
*				smb 7,$EA				if not Rockwell, assemble as nop nop
*				.OP	65C02
				asl $EA					cs if Rockwell
				stx $EA					restore zp $EA
				bcs .9
				
				dey						y=1 -> 65C02
				
.9				tya
				ora #$60
				rts
*--------------------------------------
* Out:
*  A = Z80 Slot
*--------------------------------------
DetectZ80		ldx #Z80Code.Size
.1				lda Z80Code.Start-1,x
				sta $1000-1,x			00000H for Z80
				dex
				bne .1
				
				stz ZPPtr1
				lda #$C1
				sta ZPPtr1+1
				
.2				sta (ZPPtr1)
				lda $100D
				bmi .8
				inc ZPPtr1+1
				lda ZPPtr1+1
				cmp #$C8
				beq .9					CS
				clc
				adc #$20
				sta $100A
				bra .2
				
.8				lda ZPPtr1+1
				and #$0F
				clc
.9				rts
*--------------------------------------
KConfigLoad		>LDAXI MSG.KCREAD
				jsr PrintFAX

				jsr MLI
				.DA #MLIOPEN
				.DA MLIOPEN00
				bcs .9

				lda MLIOPEN00+5
				sta MLIREAD00+1
				sta MLICLOSE00+1
				
				jsr MLI
				.DA #MLIREAD
				.DA MLIREAD00
				php
				pha
				jsr MLI
				.DA #MLICLOSE
				.DA MLICLOSE00
				pla
				plp
				bcs .9
				
				>LDAXI MSG.KCREAD.OK
				jsr PrintFAX
				rts
				
.9				>LDAXI MSG.KCREAD.KO
				jsr PrintFAX
				rts
*--------------------------------------
Z80Code.Start	.HS	31FFFF				START:	LD SP,0FFFFH		Init Stack
				.HS	3EFF						LD A,0FFH			Set Flag
				.HS	320D00						LD (FLAG),A
				.HS	3200E1						LD (0E100H),A		Back to 6502
				.HS	18F3						JR START			Loop
				.HS 00					FLAG:	.DB 0
Z80Code.Size	.EQ *-Z80Code.Start
*--------------------------------------
MemMgrInit		>LDYAI MemMgr.MHiMem
				>STYA MemMgr.HiMem
				>STYA MemMgr.Free
				>LDYAI MemMgr.MLoMem
				>STYA MemMgr.LoMem
				stz MemMgr.LastSlot		Reserve Slot #0

				sta SETWRITEAUX
				
				>LDYAI MemMgr.XHiMem
				>STYA MemMgr.HiMem
				>STYA MemMgr.Free
				>LDYAI MemMgr.XLoMem
				>STYA MemMgr.LoMem
				stz MemMgr.LastSlot		Reserve Slot #0
				
				sta CLRWRITEAUX

				rts
*--------------------------------------
PS0Init			ldx #S.DEV*2			NUL,SYS

.1				lda DevMgr.NUL-1,x
				sta DevMgr.Table-1,x
				dex
				bne .1

				lda #2
				sta DevMgr.Count
				
				>LDYAI CORE.S.PS0			Select Process 0 (Kernel)
				>STYA pPs

				>LDYAI K.STACKTOP
				>STYA pStack
				>STYA CORE.S.PS0+S.PS.Context+4			init Kernel Soft Stack

				>LDYAI DEV.SYS
				>SYSCALL MkNod.YA
				bcs .9

				ldy #S.PS.hStdIn
				sta (pPs),y
				sta CORE.S.PS0+S.PS.hStdIn
				ldy #S.PS.hStdOut
				sta (pPs),y
				sta CORE.S.PS0+S.PS.hStdOut
				ldy #S.PS.hStdErr
				sta (pPs),y
				sta CORE.S.PS0+S.PS.hStdErr

				clc
.9				rts
*--------------------------------------
DevMgr.NUL		cld
				jmp (DevMgr.NUL.Code,x)
				.DA #S.DEV.S.WRITE+S.DEV.S.READ+S.DEV.S.OPENED
				.BS 6
				>CSTR "NUL"				NAME
				.HS 00					NAME must Be 4 bytes long
*--------------------------------------
DevMgr.SYS		cld
				jmp (DevMgr.SYS.Code,x)
				.DA #S.DEV.S.WRITE+S.DEV.S.READ
				.BS 6
				>CSTR "SYS"				NAME
				.HS 00					NAME must Be 4 bytes long
*--------------------------------------
* Setup AuxLC $FFFE->Kernel IRQ Handler
* if irq not handled, jmp (S.IrqMgrOldFFFE)
*--------------------------------------
SETMOUSE		.EQ $12  				Sets mouse mode
SERVEMOUSE		.EQ $13					Services mouse interrupt
READMOUSE		.EQ $14  				Reads mouse position 
*--------------------------------------
IrqMgrInit		>LDYAI MSG.IRQ
				>SYSCALL PrintF.YA
				php
				sei
				>LDYA $FFFE
				>STYA K.IrqMgrOldFFFE
				>LDYAI K.IrqHandlerAuxLC
				>STYA $FFFE

				>LDYAI IrqHandler
				>STYA K.MLI.PARAMS+2
				>MLICALL MLIALLOCIRQ
				bcs .9
				
				lda K.MLI.PARAMS+1
				sta ProDOS.INTNUM
								
				stz ZPPtr1				Try finding a Mouse Card...
				lda #$C1
				sta ZPPtr1+1
				
.1				ldx #Mouse.SIG-Mouse.OFS-1

.2				ldy Mouse.OFS,x
				lda (ZPPtr1),y
				cmp Mouse.SIG,x
				bne .3
				dex
				bpl .2
				bra .4
				
.3				inc ZPPtr1+1			no match, try next slot....
				lda ZPPtr1+1
				cmp #$C8
				bne .1	

				plp
				clc
				rts
				
.9				plp
				sec
				rts
				
.4				lda ZPPtr1+1

				sta K.IrqMgrVBL.MSM+2
				sta K.IrqMgrVBL.MRM+2
				
				and #$0f
				sta K.IrqMgrVBL.0n
				asl
				asl
				asl
				asl

				sta K.IrqMgrVBL.n0

				ldy #SERVEMOUSE
				lda (ZPPtr1),y
				sta K.IrqMgrVBL.MSM+1

				ldy #READMOUSE
				lda (ZPPtr1),y
				sta K.IrqMgrVBL.MRM+1
				
				ldy #SETMOUSE
				lda (ZPPtr1),y
				sta .7+1
				
				lda #9					#MOUSEMODx.INTVBL+MOUSEMODx.ACTIVE

				ldx ZPPtr1+1			DEVSLOTCn
				stx .7+2
				ldy K.IrqMgrVBL.n0

				bit RROMBNK2			Renable ROM to allow MOUSE II firmware works properly
								
.7				jsr $ffff				self Modified, CALL SETMOUSE
				bcs *
				
				bit RRAMWRAMBNK1		Back To LC Ram
				bit RRAMWRAMBNK1
				inc K.IrkMgr.VBL		set=1 awaiting IrqMgr confirmation
				
				plp
				lda #"V"
				sta SYS.BASL0+37
				
				>LDYAI MSG.IRQ.VBL
				>SYSCALL PrintF.YA
				clc
				rts
*--------------------------------------
Mouse.OFS		.HS 05070B0CFB
Mouse.SIG		.HS 38180120D6
*--------------------------------------
DevMgrInit		>LDYAI MSG.DEV
				>SYSCALL PrintF.YA
				
				stz ZPPtr1
				lda #$C1
				sta ZPPtr1+1
				lda #1
				sta DEV.HEADER+S.DEV.BUSID
				
.1				lda #1
				sta DEV.HEADER+S.DEV.DEVID
				
				ldx #SmartPort.SIG-SmartPort.OFS-1

.2				ldy SmartPort.OFS,x		Check if there is a smartport firmware
				lda (ZPPtr1),y
				cmp SmartPort.SIG,x
				bne .8					not a Disk Controller...
				dex
				bpl .2

				ldy #$ff
				lda (ZPPtr1),y
				bne .3					$0, Disk II, 16sect

				jsr DevMgrInit.DII
				ldy #A2osX.SLOTS.DII
				bra .7

.3				inc
				beq .7					$ff, Disk II 13 Sect, ignore
				
				ldy #7
				lda (ZPPtr1),y
				bne .4					$Cn07=00 : SmartPort
				
				jsr DevMgrInit.SP
				ldy #A2osX.SLOTS.SP
				bra .7
	
.4				jsr DevMgrInit.BLK
				ldy #A2osX.SLOTS.BLK
				
.7				lda ZPPtr1+1
				and #$0f
				tax
				tya
				sta A2osX.SLOTS,x
				
.8				inc DEV.HEADER+S.DEV.BUSID
				inc ZPPtr1+1
				lda ZPPtr1+1				
				cmp #$C8
				bne .1
				
				clc
				rts
*--------------------------------------
DevMgrInit.DII	>LDYAI A2osX.DIIDrv
				>STYA DEV.HEADER+S.DEV.DRV.JMP
				jsr DevMgrInit.AddDev
				inc DEV.HEADER+S.DEV.DEVID
				jsr DevMgrInit.AddDev
				rts
*--------------------------------------
DevMgrInit.BLK	ldy #$ff
				lda (ZPPtr1),y
				sta DEV.HEADER+S.DEV.ROM.JMP
				lda ZPPtr1+1
				sta DEV.HEADER+S.DEV.ROM.JMP+1
				
				>LDYAI A2osX.BlkDrv
				>STYA DEV.HEADER+S.DEV.DRV.JMP
				
				jsr DevMgrInit.AddDev
				inc DEV.HEADER+S.DEV.DEVID
				jsr DevMgrInit.AddDev
				rts
*--------------------------------------
DevMgrInit.SP	ldy #$ff
				lda (ZPPtr1),y
				clc
				adc #3					Compute smartport entry point
				sta .1+1
				sta .3+1
				sta DEV.HEADER+S.DEV.ROM.JMP
				lda ZPPtr1+1
				sta .1+2
				sta .3+2
				sta DEV.HEADER+S.DEV.ROM.JMP+1

				>LDYAI A2osX.PrtDrv
				>STYA DEV.HEADER+S.DEV.DRV.JMP
				
.1				jsr $ffff				Self Modified
				.DA #0					Status
				.DA SP.CTRL.STATUS
				bcs .9
				lda SP.CTRL.STATUS.DATA
				beq .9					no device
				
.2				lda #1
				sta SP.DEV.STATUS.DEVID
				
.3				jsr $ffff				Self Modified
				.DA #0					Status
				.DA SP.DEV.STATUS
				bcs .7
				lda SP.DEV.STATUS.DATA+S.DEVSTAT.S
				sta DEV.HEADER+S.DEV.S
				
				jsr DevMgrInit.AddDev
				
.7				inc SP.DEV.STATUS.DEVID
				inc DEV.HEADER+S.DEV.DEVID
				dec SP.CTRL.STATUS.DATA
				bne .3

.9				rts
*--------------------------------------
DevMgrInit.AddDev
				lda DevMgr.Count
				cmp #K.DEV.MAX
				beq .9
				
				inc DevMgr.Count
				>SYSCALL GetDevByID.A
				>STYA ZPPtr2
				
				lda DEV.HEADER+S.DEV.BUSID
				ora #$30
				sta DEV.HEADER+S.DEV.NAME+1		SnDy
				
				lda DEV.HEADER+S.DEV.DEVID
				ora #$30
				sta DEV.HEADER+S.DEV.NAME+3		SxDn

				ldy #S.DEV-1
				
.1				lda DEV.HEADER,y
				sta (ZPPtr2),y
				dey
				bpl .1
				
				clc
				rts
				
.9				lda #MEMMGR.ERROOH
				sec
				rts					
*--------------------------------------
DEV.HEADER		clc
				jmp ($ffff,x)
				.DA #S.DEV.S.BLOCK		S
				.BS 1					F
				.BS 1					BUS.ID
				.BS 1					DEV.ID
				.BS 2					ROM.JMP
				.BS 1
				>CSTR "S1D1"			5 bytes
*--------------------------------------
SmartPort.OFS	.HS 010305
SmartPort.SIG	.HS 200003
*--------------------------------------
SP.CTRL.STATUS	.DA #3
				.DA #0
				.DA SP.CTRL.STATUS.DATA
				.DA #0
SP.CTRL.STATUS.DATA
				.BS 8					DevCnt
SP.DEV.STATUS	.DA #3
SP.DEV.STATUS.DEVID
				.BS 1
				.DA SP.DEV.STATUS.DATA
				.DA #3					return DIB
SP.DEV.STATUS.DATA
				.BS S.DEVSTAT
*--------------------------------------
EvtMgrInit		>LDYAI MSG.EVT
				>SYSCALL PrintF.YA
				lda #$A5
				sta A2osX.TIMER16
				lda #$9B
				sta A2osX.TIMER16+1

				lda /EvtMgr.Table
				sta pEvent+1
				clc
				rts
*--------------------------------------
FltMgrInit		>LDYAI MSG.FLT
				>SYSCALL PrintF.YA
				stz FltMgr.Table
				clc
				rts
*--------------------------------------
TskMgrInit		>LDYAI MSG.TSK
				>SYSCALL PrintF.YA

				jsr CORE.PSSelect0
				
				>LDYAI K.ENV.SIZE		get a buffer for ENV
				>SYSCALL GetMem0.YA		make sure blank!!
				bcs .9
				
				txa
				ldy #S.PS.hENV
				sta (pPs),y

				>LDYAI K.Buf256
				>STYA K.MLI.PARAMS+1
				>MLICALL MLIGETPREFIX
				bcs .9
				
				ldy K.Buf256
				iny
				lda #0
				jsr K.GetMem.YA
				>STYA ZPPtr1
				txa
				ldy #S.PS.hPREFIX
				sta (pPs),y
				
				ldy K.Buf256
				lda #0
				sta (ZPPtr1),y
				
.4				lda K.Buf256,y
				dey
				sta (ZPPtr1),y
				bne .4
				
				>PUSHW ZPPtr1			push ENV value = PREFIX

				>PUSHWI I.ENV.A2osX		push ENV name = A2OSX
				>SYSCALL SetEnv
				bcs .9

				>LDYAI I.ENV.PATH
				>SYSCALL PutEnv.YA
				bcs .9

				>LDYAI I.ENV.LIB
				>SYSCALL PutEnv.YA
				bcs .9

				>LDYAI I.ENV.DRV
				>SYSCALL PutEnv.YA
.9				rts
*--------------------------------------
MSG.Init2		>CSTR "A2osX[Stage2]:Init\nInstalling KERNEL...\n - $BE00 Global Page...\n"
MSG.D1			>CSTR " - $D000 Bank1...\n"
MSG.D2			>CSTR " - $D000 Bank2...\n"
MSG.E0		 	>CSTR " - $E000...\n"
MSG.HZ			>CSTR "Kernel SYS Timer Set For %d0 hz Machine.\n"
MSG.Init2.OK	>CSTR "A2osX[Stage2]:Complete.\n"
*--------------------------------------
MSG.Init3		>CSTR "A2osX[Stage3]:Init\r\n"
MSG.DEV			>CSTR "-Device Manager...\r\n"
MSG.IRQ			>CSTR "-Interrupt Manager...\r\n"
MSG.IRQ.VBL		>CSTR " (VBL IRQ Activated)\r\n"
MSG.EVT			>CSTR "-Event Manager...\r\n"
MSG.FLT			>CSTR "-Path Filter...\r\n"
MSG.TSK			>CSTR "-Task Manager...\r\n"
MSG.Prefix		>CSTR "Prefix:%s\r\n"
MSG.Startup		>CSTR "Executing Kernel Startup Script...\r\nCmd:%s\r\n"
MSG.StartupErr	>CSTR "Failed : [$%h]\r\n"
MSG.Init3.OK	>CSTR "A2osX[Stage3]:Complete.\r\n"
*--------------------------------------
MSG.CPU			>CSTR "Checking CPU..."
MSG.CPU.SPEED	>CSTR "Detecting CPU Speed..."
MSG.CPUTYPEL	.DA #MSG.6502
				.DA #MSG.65C02
				.DA #MSG.65R02
				.DA #MSG.65816
MSG.CPUTYPEH	.DA /MSG.6502
				.DA /MSG.65C02
				.DA /MSG.65R02
				.DA /MSG.65816
MSG.6502		>CSTR "6502.\n"
MSG.65C02		>CSTR "65C02.\n"
MSG.65R02		>CSTR "65R02.\n"
MSG.65816		>CSTR "65816.\n"
MSG.CPU.SPEEDOK	>CSTR "%d.%02d Mhz.\n"
MSG.Z80			>CSTR "Detecting Z80 CPU..."
MSG.Z80.OK		>CSTR "Detected In Slot %d.\n"
MSG.Z80.KO		>CSTR "Not Detected.\n"
MSG.KCREAD		>CSTR "Reading Kernel Config File..."
MSG.KCREAD.OK	>CSTR "OK\n"
MSG.KCREAD.KO	>CSTR "\nError While Reading Kernel Config File, Using Default.\n"
*--------------------------------------
DEV.SYS			>CSTR "SYS"
I.ENV.A2osX		>CSTR "A2OSX"
I.ENV.PATH		>CSTR "PATH=${A2OSX}SBIN/;${A2OSX}BIN/"
I.ENV.LIB		>CSTR "LIB=${A2OSX}LIB/"
I.ENV.DRV		>CSTR "DRV=${A2OSX}DRV/"
STARTUP.CMDLINE	>CSTR "${A2OSX}SBIN/SHELL ${A2OSX}A2osX.STARTUP"
*--------------------------------------
MLIOPEN00		.DA #3
				.DA A2OSXCONF
				.DA $1000			
				.BS 1
A2OSXCONF		>PSTR "A2osX.KCONFIG"
*--------------------------------------
MLIREAD00		.DA #4
				.BS 1
				.DA A2osX.HZ
				.DA 16
				.BS 2
*--------------------------------------
MLICLOSE00		.DA #1
				.BS 1
*--------------------------------------
MAN
SAVE /A2OSX.SRC/SYS/KERNEL.S.INIT
LOAD /A2OSX.SRC/SYS/KERNEL.S
ASM